Instruction/ maintenance manual of the product TankWatch Level Monitor System SeaLand
Go to page of 2
DO-IT -YOURSELF INST ALLA TION INSTRUCTIONS The T ankW atch Level Monitor System is designed to operate on 12 VDC in a sewage holding tank, and to signal a nearly full tank condition. This instrument will give years of reliable service if installed properly .
6 5 7 A . Connect the red wire through a 1/2-amp fuse (not supplied), to the positive DC source. B. Connect the white wire from the red LED to one of the white wires on the Float Switch Assembly . C. Connect the remaining white wire from the Float Switch Assembly to the negative DC source.
An important point after buying a device SeaLand TankWatch Level Monitor System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SeaLand TankWatch Level Monitor System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SeaLand TankWatch Level Monitor System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SeaLand TankWatch Level Monitor System you will learn all the available features of the product, as well as information on its operation. The information that you get SeaLand TankWatch Level Monitor System will certainly help you make a decision on the purchase.
If you already are a holder of SeaLand TankWatch Level Monitor System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SeaLand TankWatch Level Monitor System.
However, one of the most important roles played by the user manual is to help in solving problems with SeaLand TankWatch Level Monitor System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SeaLand TankWatch Level Monitor System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
