Instruction/ maintenance manual of the product ST34520A Seagate
Go to page of 10
M EDALIST P RO H ARD D RIVE I NST ALLA TION G UIDE Medalist Pro 9140 (ST39140A) Medalist Pro 6530 (ST36530A) Medalist Pro 4520 (ST34520A) for A T A (IDE)-Compatible PCs T HE E ASIEST W AY TO I NST ALL Y OUR D RIVE DiscWizard is a revolutionary new Windows program that makes it easy to install your Seagate Medalist Pro drive.
H ANDLE WITH C ARE ! Disc drives are extremely fragile. Do not drop or jar your drive. W HA T Y OU W ILL N EED • Straight-edge and Phillips screwdrivers • Drive mounting screws • An A T A interface cable (max length:18 inches), and available 40-pin connector .
2 a 3 3A. I NST ALLA TION U SING D ISK M ANAGER 1 Boot your computer from a bootable DOS diskette (use MS DOS Version 5.0 or later). Booting from a diskette ensures that the Disk Manager installation does not conflict with any terminate-and-stay-resident (TSR) programs.
b 3 3B. S T ANDARD DOS I NST ALLA TION Caution. Partitioning or formatting a drive erases all data on it. Seagate assumes no liability if you erase your data. Drive Partitioning Partitioning a hard drive divides it into sections (partitions) that function as separate logical drives (labeled C, D, E, etc.
Cable Select Jumper Some computers differentiate between master and slave drives using specially designed interface cables that have the line to pin 28 (the Cable Select pin) removed or cut at one connector . The connector that has pin 28 disabled is used for the slave drive.
• Check for I/O address conflicts. T o isolate the conflict, verify that the drive and host adapter are compatible with your computer . T ur n off the computer and remove all the peripheral adapter cards except for t he video card and host adapter .
S upported Operating Systems The Disk Manager dynamic drive overlay provides support for drives that have capacities greater than 528 Mbytes under MS-DOS, Windows 3. x, Windows 95, Windows NT 3.51, Window NT 3.50 (requires DM upgrade drivers), OS/2 V3.
– Y ou entered a translation characteristic that does not take advantage of the drive’ s full capacity . – The drive’ s physical specifications exceed the translation limits imposed by the BIOS. ! Caution. If you change the drive-type values in the system setup program, you must partition and format the drive again.
2 b 3 a 3 M EDALIST P RO H ARD D RIVE I NST ALLA TION G UIDE Medalist Pro 9140 (ST39140A) Medalist Pro 6530 (ST36530A) Medalist Pro 4520 (ST34520A) for AT A (IDE)-Compatible PCs H ANDLE WITH C ARE ! Disc drives are extremely fragile. Do not drop or jar your drive.
Cable Select Jumper Some computers differentiate between master and slave drives using specially designed interface cables that have the line to pin 28 (the Cable Select pin) removed or cut at one connector . The connector that has pin 28 disabled is used for the slave drive.
An important point after buying a device Seagate ST34520A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seagate ST34520A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seagate ST34520A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seagate ST34520A you will learn all the available features of the product, as well as information on its operation. The information that you get Seagate ST34520A will certainly help you make a decision on the purchase.
If you already are a holder of Seagate ST34520A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seagate ST34520A.
However, one of the most important roles played by the user manual is to help in solving problems with Seagate ST34520A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seagate ST34520A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
