Instruction/ maintenance manual of the product ST33220A Seagate
Go to page of 10
2 b 3 a 3 M EDALIST H ARD D RIVE I NST ALLA TION G UIDE Medalist 6540 (ST36540A) Medalist 5130 (ST35130A) Medalist 3220 (ST33220A) for A T A (IDE)-Compatible PCs H ANDLE WITH C ARE ! Disc drives are extremely fragile.
Non-A T A compatible slave jumper If your computer does not recognize your new drive as a master in a two-drive system, the slave drive may not be A TA-compatible. Y ou may be able to solve this problem by installing jumpers on pins 5 and 6 and on pins 7 and 8, as shown in the illustration below.
M EDALIST H ARD D RIVE I NST ALLA TION G UIDE Medalist 6540 (ST36540A) Medalist 5130 (ST35130A) Medalist 3220 (ST33220A) for A T A (IDE)-Compatible PCs U SING D ISC W IZARD DiscWizard is a revolutionary new Windows program that makes it easy to install your Seagate Medalist ® drive.
H ANDLE WITH C ARE ! Disc drives are extremely fragile. Do not drop or jar your drive. W HA T Y OU N EED • Straight-edge and Phillips screwdrivers • Drive mounting screws • An A T A host adapter and inter face cable (max.
2 a 3 3A. I NST ALLA TION U SING D ISK M ANAGER 1 Boot your computer from a bootable DOS diskette (use MS DOS Version 5.0 or later). Booting from a diskette ensures that the Disk Manager installation does not conflict with any terminate-and-stay-resident (TSR) programs.
b 3 3 B . S T ANDARD DOS I NST ALLA TION ! Caution. Partitioning or formatting a drive erases all data on it. Seagate assumes no liability if you erase your data. Drive Partitioning Partitioning a hard drive divides it into sections (partitions) that behave as separate logical drives (labeled C, D, E, etc.
Non-A T A compatible slave jumper If your computer does not recognize your new drive as a master in a two-drive system, the slave drive may not be A T A-compatible. Y ou may be able to solve this problem by installing jumpers on pins 5 and 6 and on pins 7 and 8, as shown in the illustration below.
other peripheral cards, one at a time, until the conflict reccurs. After you have isolated the source of the address conflict, you can resolve the conflict by changing the I/O address of the peripheral that appears to cause the conflict.
pg y , , Windows 95, Windows NT 3.51, Window NT 3.50 (requires DM upgrade drivers), OS/2 V3.0 (Warp full pack), and OS/2 V2.0–3.0 (requires DM upgrade drivers). Before you install a non-DOS operating system on the drive, install DOS and Disk Manager and make sure that the drive is bootable.
py ! Caution. If you change the drive-type values in the system setup program, you must partition and format the drive again. This erases data on the drive. • If you have partitioned the drive into individual logical drives, you may need to make the partitions smaller to access the full drive capacity .
An important point after buying a device Seagate ST33220A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seagate ST33220A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seagate ST33220A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seagate ST33220A you will learn all the available features of the product, as well as information on its operation. The information that you get Seagate ST33220A will certainly help you make a decision on the purchase.
If you already are a holder of Seagate ST33220A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seagate ST33220A.
However, one of the most important roles played by the user manual is to help in solving problems with Seagate ST33220A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seagate ST33220A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
