Instruction/ maintenance manual of the product P116T Avaya
Go to page of 16
Avaya Installation Guide Avaya P116T S TACKABLE S WITCH.
.
P116T Stackable Switch Installation Guide 1 Preface Important information SAFETY PRECAUTIONS CAUTION – TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE 1. All servicing should be undertaken ONLY by qualified personnel. The parts inside the unit CANNOT be serviced or repaired by the end user.
Preface Safety Instructions 2 P116T Stackable Switch Installation Guide 3. Vergewissern Sie sich, dass die Ch assis Ventilationsöffnungen des Gerätes NICHT BLOCKIERT sind. 4. Austauschen einer durchgebrannten Sicherung NUR mit der gleichen Sorte und Belastbarkeit wie sie auf der Sicherheitsaufschrift markiert ist.
P116T Stackable Switch Installation Guide 3 Chapter 1 Overview This guide is divided into two sections: • Overview: A general description of the features of th e P116T Stackable Switch. • Installation: Instructions for getting the P116T St ackable Switch and P110 Switching System up and running.
Chapter 1 Description 4 P116T Stackable Switch Installation Guide.
P116T Stackable Switch Installation Guide 5 Chapter 2 Installation Setting the DIP switches First, set the DIP switches. The posit ion of the switches depends on the P110 application. The drawing below shows the de fault positions of the DIP switches on the rear panel of the P110 hub.
Chapter 2 Installation 6 P116T Stackable Switch Installation Guide Table 1 DIP Switches on the P116T Stackable Switch S witch Function ON OFF S witches 1-16 Selection of port speed 10 Mbps 100 Mbps (Default) (second switch f rom the ri g ht) Not used USE SW (Use Switch) Selection of operational mode: control by management station or DIP switches.
Chapter 2 Installation P116T Stackable Switch Installation Guide 7 Installing the P1 16T Stackable Switch The procedure for getting the P116T Stackab le Switch up and running depends on whether the hub is to operate st andalone or as part of a stack. First, attach the adhesive rubber feet to the base of the P110 switch.
Chapter 2 Installation 8 P116T Stackable Switch Installation Guide Configuration parameters will be set back t o factory defaults if they were set using the management station. The factor y default parameters are described in the P110 NMA 8.4 Release Note.
Chapter 2 Installation P116T Stackable Switch Installation Guide 9 Figure 2 Rear view of a P110 switch st ack, showing how the switc hes are linked via the P110 Exoplane cables. A P110 NMA resides in the uppermost switch. 6. Two terminators are supplied with the P110 NMA.
Chapter 2 Installation 10 P116T Stackable Switch Installation Guide Rack Mounting P110 switches slot into a standard 19 inch rack. Remove the rubber legs from the base of an y switch that is to be rack mounted. Place the switches in the rack, and then connect th e P110 Exoplane, as follows: 1.
Chapter 2 Installation P116T Stackable Switch Installation Guide 11 Diagnostics Tables 2 and 3 explain the meaning of the P116T Stackable Switch diagnostic LED indicators.
Chapter 2 Installation 12 P116T Stackable Switch Installation Guide Table 3 Meaning of the P116T Stackable Switch front panel LEDs LED Indicator Function Status Meaning PWR Power OFF ON Blink Mains po.
Chapter 2 Installation P116T Stackable Switch Installation Guide 13.
© 2003 Avaya Inc. All rights reserved. All trademarks identified by the ® or TM are registered trademarks or trademarks, respectively, of Avaya Inc. All other trademarks are the property of their respective owners.
An important point after buying a device Avaya P116T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avaya P116T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avaya P116T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avaya P116T you will learn all the available features of the product, as well as information on its operation. The information that you get Avaya P116T will certainly help you make a decision on the purchase.
If you already are a holder of Avaya P116T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avaya P116T.
However, one of the most important roles played by the user manual is to help in solving problems with Avaya P116T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avaya P116T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
