Instruction/ maintenance manual of the product ST2000VX000 Seagate
Go to page of 43
Product Manual SV35 Series TM 100687219 Rev. C June 2012 ST3000VX000 ST2000VX000 ST1000VX000.
© 2012 Seagate Technology LLC. All rights reserved. Publication number: 100687219, Rev. C June 2012 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/ or other countries.
SV35 Series SATA Product Manual, Rev. C Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . .
SV35 Series SATA Product Manual, Rev. C.
SV35 Series SATA Product Manual, Rev. C Figures Figure 1 Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 2 Mounting dimensions (3-disk: 3TB and 2TB models) . . .
SV35 Series SATA Product Manual, Rev. C.
SV35 Series SATA Product Manual, Rev. C 7 For information regarding online support and services, visit http://www .seag ate.com/www/en-us/about/ contact_us/ Available services include: • Presales &a.
8 SV35 Series SATA Product Manual, Rev. C.
SV35 Series SATA Product Manual, Rev. C 9 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Barracuda ® model drives: These driv.
10 SV35 Series SATA Product Manual, Rev. C Introduction www.seagate.com The SATA interface connects each disk drive in a point-to-point configuration with the SATA host adapter. There is no master/slave relationship with SATA devices like there is with parallel ATA.
SV35 Series SATA Product Manual, Rev. C 11 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: 2.
12 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
SV35 Series SATA Product Manual, Rev. C 13 www.seagate.com Drive Specifications 2.2 Formatted capacity *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity m ay vary depending on operating environment and formatting.
14 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature.
SV35 Series SATA Product Manual, Rev. C 15 www.seagate.com Drive Specifications 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. Refer to Figure 1 on page 24 . 2.8.1 Power consumption Power requirements for the drives are listed in Table 2 and Table 3 .
16 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com * During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase ac oustic and power to operational levels. †DIPLM Enabled 2.
SV35 Series SATA Product Manual, Rev. C 17 www.seagate.com Drive Specifications 2.8.3 Voltage tolerance Voltage tolerance (including noise): •5 V ±5% • 12V +10% / -7.5% 2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency.
18 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com 2.9 Environmental specifications 2.9.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions.
SV35 Series SATA Product Manual, Rev. C 19 www.seagate.com Drive Specifications 1TB model The non-operating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a non-repetitive half-sine shock pulse of 2-ms duration.
20 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in Table 4 .
SV35 Series SATA Product Manual, Rev. C 21 www.seagate.com Drive Specifications 2.13 Agency certification 2.13.1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.
22 SV35 Series SATA Product Manual, Rev. C Drive Specifications www.seagate.com If necessary, you should consult your dealer or an experienced radio/television technician for additional suggestions.
SV35 Series SATA Product Manual, Rev. C 23 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive.
24 SV35 Series SATA Product Manual, Rev. C Configuring and Mounting the Drive www.seagate.com Figure 1 Attaching SATA cabling Each cable is keyed to ensure correct orientation.
SV35 Series SATA Product Manual, Rev. C 25 www.seagate.com Configuring and Mounting the Drive Figure 3 Mounting dimensions (1-Disk: 1TB) Temperature Check Point.
26 SV35 Series SATA Product Manual, Rev. C Configuring and Mounting the Drive www.seagate.com.
SV35 Series SATA Product Manual, Rev. C 27 4.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6.
28 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com Notes 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins P4 and P12.
SV35 Series SATA Product Manual, Rev. C 29 www.seagate.com SATA Interface Device Reset 08 H Download Microcode 92 H Execute Device Diagnostics 90 H Flush Cache E7 H Flush Cache Extended EA H Format Tr.
30 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com Set Max Address F9 H Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right.
SV35 Series SATA Product Manual, Rev. C 31 www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in on page 28.
32 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com 59 Number of sectors transferred during a Read Multiple or Write Multiple command xxxx H 60–61 Total number of user-addressable LBA sectors available (see Section 2.
SV35 Series SATA Product Manual, Rev. C 33 www.seagate.com SATA Interface 93 Hardware reset value xxxx H 94 Automatic acoustic management 8080 H 95–99 ATA-reserved 0000 H 100–103 Total number of user-addressable LBA sectors available (see Section 2.
34 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt.
SV35 Series SATA Product Manual, Rev. C 35 www.seagate.com SATA Interface 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time.
36 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com DA H S.M.A.R.T. Return Status Note If an appropriate code is not written to the Features Register, the command is aborted and 0 x 04 (abort) is written to the Error register. Code in features register S.
SV35 Series SATA Product Manual, Rev. C 37 www.seagate.com SATA Interface.
38 SV35 Series SATA Product Manual, Rev. C SATA Interface www.seagate.com.
SV35 Series SATA Product Manual, Rev. C 39 A ACA 21 acceleration 19 acoustics 19 Active 17 Active mode 17 Agency certification 21 altitude 18 Ambient temperature 18 ambient temperature 14, 15 Annualiz.
40 SV35 Series SATA Product Manual, Rev. C mounting screws 18 mounting the drive 23 N noise 16 nominal power 14 Nonoperating shock 18 Nonoperating vibration 19 O operating 15, 16 Operating power 15 Op.
SV35 Series SATA Product Manual, Rev. C 41 Track-to-track 14 Track-to-track seek time 14 U UL60950-1 21 V voltage 15 Voltage dips, interrupts 20 Voltage tolerance 17 W weight 14 wet bulb temperature 1.
.
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte.
An important point after buying a device Seagate ST2000VX000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seagate ST2000VX000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seagate ST2000VX000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seagate ST2000VX000 you will learn all the available features of the product, as well as information on its operation. The information that you get Seagate ST2000VX000 will certainly help you make a decision on the purchase.
If you already are a holder of Seagate ST2000VX000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seagate ST2000VX000.
However, one of the most important roles played by the user manual is to help in solving problems with Seagate ST2000VX000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seagate ST2000VX000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
