Instruction/ maintenance manual of the product SED FIPS 140-2 MODEL Seagate
Go to page of 50
Product Manual Constellation ® ES.2 Serial A T A 100633157 Re v . D April 2011 St a ndard Model ST33000650NS Self-Encrypting Drive Model ST33000651NS SED FIPS 140-2 Model Review Pending ST33000652 NS.
Revision history © 201 1 Seag ate T echnology LLC. All righ ts reserved. Publication number: 100633157, Rev . D, April 201 1 Seagate, Seagate T echnology and the W ave logo are re gistered trademarks of Seagate T echnology LLC in the United S t ates and/or othe r countrie s.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D i Contents 1.0 Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Introduction . . . . . . . . . . . . . . . . . . .
ii Constellation ES. 2 Serial ATA Product Manu al, Rev. D 6.3 Random number generator (R NG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 6.4 Drive locking . . . . . . . . . . . . . . . . . . . . . . . . . .
Constellation ES.2 Serial ATA Pr odu ct Manual, Rev. D iii List of Figures Figure 1. Typical 5V startup and operation c urrent profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Figure 2. Typical 12V startup and operation current profile .
.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 1.0 Seagate T echnology support services SEAGA TE ONLINE SUPPORT and SERVICES For information regarding pr oducts and services, visit http://www .
2 Constellation ES.2 Serial ATA Product Man ual, Rev. D 2.0 Introduction This manual describes the functiona l, mechanical an d interface specifications for the following Seagate Constellation ® ES.2 Serial A T A model d rives: These drives provide the following key fea t ures: • 7200 RPM spindle speed.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 2.1 About the Serial A T A interface The Serial A T A interface provides several ad vantages over the traditional (p arallel) A T A interf ace. The p rimary advantages include : • Easy installation and configuration with true plug-and-play connectivity .
4 Constellation ES.2 Serial ATA Product Man ual, Rev. D 3.0 Drive specifications Unless otherwise noted, all specific ations are measured und er ambient conditions, at 25°C, and nominal power . For convenience, the phrases the drive and this drive are used throughout this manu al to indicate the following drive models: 3.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 5 * On e GB equals one billion bytes when referrin g to hard drive capacity. Accessible capacity may vary depending on operating env ironment and formatting. * *During pe riods of drive idle, some offli ne a ctivity may occur according to the S.
6 Constellation ES.2 Serial ATA Product Man u al, Rev. D 3.2 Formatted cap acity Model Formatted capacity* Guaranteed sectors Bytes per sector ST33000650NS ST33000651NS ST33000652NS 3TB 5,860,533,168 512 *One GB equals one billion bytes when referring to hard drive capacity.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 7 3.5 Physical characteristics Weight: (maximum) 700g (1.543 lb) Cache buffer 64MB (64,768KB) 3.6 Seek time Seek measurement s are t aken with nominal p ower at 25°C ambient temperatur e. All times are measured using drive diagnostics.
8 Constellation ES.2 Serial ATA Product Man ual, Rev. D 3.8 Power specifications The drive receives DC power (+ 5V or +12V) thro ugh a na tive SA T A power connector . See Figure 4 on p age 23. 3.8.1 Power co nsumption Power requirement s for the drives are listed in the t able on p age 9.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 9 * During period s of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase ac oustic and power to operational levels . T able 2: 3000GB Drive DC power requirement s 3.
10 Constellation ES. 2 Serial ATA Product Manual, Rev. D 3.8.1.1 T y pical curren t profiles Figure 1. T y pical 5V startup and operation current profile.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 1 Figure 2. T ypical 12V startup and operatio n cu rrent profile 3.8.2 C onducted noise Input noise ripp le is meas ured at th e host sys tem po we r supply across an equivalent 80-ohm resistive load on the +12 V line or an equivalent 15 -ohm resistive load on the +5V line.
12 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 3.8.4 Power-man agement mo des The drive provides prog rammable power man agement to provide greater energy effici ency . In most systems, you can control power manage ment through the system setup program.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 3 3.8.4.1 Extended Power Condition s - PowerChoice TM Utilizing the load/unlo ad architecture a progr ammable power management interf ace is provided to tailor sys- tems for reduced power consumption and performance require m ents.
14 Constellation ES. 2 Serial ATA Product Manual, Rev. D S.M.A.R.T . Read Data Report s • Attribute 192 - Emergency Retra ct Co unt • Attribute 193 - Loa d/Unload Cycle Count PowerChoice Manufacture Default Power Condition Timer V alues Default power condition timer values have been established to assure product reliability and data integrity .
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 5 3.9 Environment al limits T emperature and hum idity values experienced by the d riv e must be such that condens ation does not occur on any drive part. Altitude and atmospheric pressure specif icat ions are referenced to a st andard day at 58.
16 Constellation ES. 2 Serial ATA Product Manual, Rev. D 3.9.2 Humid ity 3.9.2.1 Relative humidity Operating: 5% to 90% noncondensing (30% per hour ma x) Nonoperating: 5% to 95% noncondensi ng (30% pe r hour max) 3.9.3 Altit ude Operating: –60.96 m to 3,048 m (–200 ft.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 7 3.10 Acoustics Drive acoustics are measur ed as overall A- weighted ac oustic sound power levels (no pure tones). All mea- surements are co nsistent with ISO d o cument 7779. S ound powe r measurements are t aken under essentially free-field conditions over a reflecting plane.
18 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 3.13 Reliability 3.13.1 Annualized Failure Rate (AFR) and Mean T ime Between Failures (MTBF ) The product shall achi eve an Annualized Failure Rate (AFR) of 0.73% (MTBF of 1.2 million hours) when oper- ated nominal powe r and typical case temper atures of 40 °C.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 1 9 Korean RRL If these drives have the Korean Communications Commission (KCC) logo , they comply with paragraph 1 of Article 1 1 of the El ectrom.
20 Constellation ES. 2 Serial ATA Product Manual, Rev. D 3.15 Environment al protection Seagate designs it s products to meet en vironmental pr otection requirement s worldwide, including regulations restricting certain chemical substances.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 2 1 3.17 Reference document s Self-Encrypting Drives Reference Manual Seagate p art number: 10051 5636 T rusted Computing Group ( T CG) Documents ( app ly to Self-Enc rypting Drive models only) TCG S torage Architecture Core S pecification, Rev .
22 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 4.0 Configuring and mounting the dri v e This section contains the specif ications an d instructions for configuring and mounting the drive.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 2 3 4.2 Configuring the drive Each drive on the Serial A T A interface connect s point-to-point with the Serial A T A host adapter . There is no master/slave rela tionship beca use each drive is cons ider ed a master in a point-to-point relationship.
24 Constellation ES. 2 Serial ATA Product Manual, Rev. D 4.4.1 Mechanic al spec ifications Refer to Figure 5 for det ailed mounting configuratio n dimensions. See Section 4.4, “Drive moun ting.” Note. These dimensions conform to the Small Form Factor S tandard documented in SFF-8301 and SFF-8323, found at www .
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 2 5 5.0 About FIPS The Federal Information Proce ssing S tandard (FIPS) Publication 140-2, FIPS PU B 140-2, is a U.S. govern- ment computer securi ty st andard used to accre dit cryptogr aphic modules.
26 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 6.0 About self-e ncrypting drives Self-encrypting d rives (SEDs) of fer encryption and secu rity services for the protection of stored data, com- monly known as “protection of data at rest.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 2 7 6.2.2 Locking SP The Locking SP contro ls read/write a ccess to the med ia and the cryptographic e r ase feature. Access to the Locking SP is available using the BandMasterX or Er aseMaster passwords.
28 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 6.7 Authenticated firmware do wnload In addition to providing a locking mechanism to preven t unwante d firmware download a ttempts, the drive also only accepts download files which have been cryptographica lly signed by the appropriate Seagate Design Center .
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 2 9 7.0 Serial A T A (SA T A) interface These drives use the industry-s tandard Ser ial A T A interfac e that supp orts FIS data transfers. It supp orts A T A programmed input/o u tput (PIO) modes 0–4; mult iword DMA modes 0–2, and Ultr a DMA modes 0–6.
30 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 7.2 Serial A T A device plug conn ector pin definitions Table 5 summarizes the sig nals on the Se rial ATA interface and power co nn ectors. Notes: 1. All pins are in a single row , with a 1.27mm (0.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 1 7.3 Supported A T A commands The following t able list s Serial A T A standard comman ds that the drive supports. For a det ailed description of the A T A commands, refer to the Serial A T A: High S peed Serialized A T Att achment specification .
32 Constellation ES. 2 Serial ATA Product Manu al, Rev. D Security Erase Prepare F3 H Security Erase Unit F4 H Security Freeze F5 H Security Set Password F1 H Security Unlock F2 H Seek 70 H Set Featur.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 3 7.3.1 Identify Dev ice comma n d The Identify Device command (command code EC H ) tran sfers information about the drive to the host following power up. The da t a is or ganized as a single 512-b yte block of data, whose contents are shown in T able 6 o n page 31.
34 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 60–61 T otal number of user-addressable LBA sectors availabl e (see Section 3.2 for related information) *Note: The maximum value all owed in this field is: 0FFFFF FFh (268,435,455 sectors, 137GB).
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 5 Note. See the bit descriptio ns below for words 63 , 84, and 88 of the Identify Drive data. 108–1 1 1 The mandatory value of the worl d wide name (WWN) for the drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indica ti n g 64-b i t WWN support.
36 Constellation ES. 2 Serial ATA Product Manu al, Rev. D Bit Wor d 8 8 0 Ultra DMA mode 0 is supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 7 7.3.2 Set Featu res command This command controls the implement ation of various fe at ures th at the drive suppo rts. When the drive receives this command, it sets BSY , checks the contents of the Features r e gister , clears BSY and generate s an inter- rupt.
38 Constellation ES. 2 Serial ATA Product Manu al, Rev. D 7.3.3 S.M.A.R.T . commands S.M.A.R.T . provides near-term failure prediction for d isc drives. When S.M.A.R.T . is enabled, the d r ive moni- tors predetermined drive attributes that are suscep t ible to degradation over time.
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 3 9 Index A ACA 19 acoustics 17 Active 12 Active m ode 12 actuator arm 8 Admin SP 26 AES-128 data encryption 26 Agency certification 18 altitude 1.
40 Constellation ES. 2 Serial ATA Product Manu al, Rev. D Flush Cache 3 1 Flush Cache Ext ended 31 Format Track 31 Formatted ca pacity 6 G geometry 6 Global Data Ba nd 27 gradient 1 5 guaranteed sect .
Constellation ES.2 Serial ATA Pr oduct Manual, Rev. D 4 1 Read DMA 31 Read DMA Extended 31 Read DMA without Retries 31 read errors 18 Read Log Ext 31 Read Multiple 31 Read Multiple Extended 31 Read Na.
42 Constellation ES. 2 Serial ATA Product Manu al, Rev. D U UL60950-1 18 V Vibration 16 voltage 8 Voltage dips, int errupts 17 Voltage tolerance 11 W weight 7 wet bulb tem perature 16 Write Buffer 32 .
.
Seagate T echnology LLC 920 Disc Drive , Scotts V all ey , California 95066-4544, USA Publicat ion Number : 100633157, Re v . D.
An important point after buying a device Seagate SED FIPS 140-2 MODEL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seagate SED FIPS 140-2 MODEL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seagate SED FIPS 140-2 MODEL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seagate SED FIPS 140-2 MODEL you will learn all the available features of the product, as well as information on its operation. The information that you get Seagate SED FIPS 140-2 MODEL will certainly help you make a decision on the purchase.
If you already are a holder of Seagate SED FIPS 140-2 MODEL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seagate SED FIPS 140-2 MODEL.
However, one of the most important roles played by the user manual is to help in solving problems with Seagate SED FIPS 140-2 MODEL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seagate SED FIPS 140-2 MODEL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
