Instruction/ maintenance manual of the product G40RS Scytek electronic
Go to page of 12
GALAXY G40RS AUTOMATIC TRANSMISSION ONLY WITH SEPERATE LOCK/UNLOCK BUTTONS REMOTE START SYSTEM PRODUCT MANUAL.
G 40RS - Page 1 PLEASE NOTE: Some of the features described in this manual may require additional parts and/or labor, and may not be included as part of the standard installation of this unit. Additionally, many features of this security system have selectable options that must be activated or programmed during the system’s installation.
Remote Transmitter Description The G40RS is a state-of -the-art remote starting system is supplied with two 4-button R emote T ransmit ters used to control system operations.
G 40RS - Page 3 Adding/Replacing Transmitters T o replace lost or stolen tr ansmitters or to add additional transmit ters into the system, have all desired transmit ters ready and follow the steps below . Note : Up to four tr ansmitters can be programmed to oper ate the system.
Page 4 - G 40RS Remote Locking T o Lock the doors: 1. T urn off the ignition. 2. Press Button 1. · The doors will lock. · The parking lights will flash once. · The LED will turn on, to indicate the doors are locked. 3. 10 seconds after Locking: · The LED will start blinking.
Valet Mode The V alet Mode tempor arily disables the remote start system so the vehicle may be serviced by a mechanic. The remote transmit ters will continue to lock/unlock the doors. T o activ ate or deactivate the V alet Mode: 1. T urn on the ignition.
Ignition Door Locking F or added safety , the Ignition Door Locking f eature allows vehicles equipped with power door lock systems to automatically lock the doors when the ignition is turned on. Ignition Door Unlocking F or added convenience, this feature automatically unlocks the doors after the ignition k ey is turned off .
G 40RS - Page 7 Jumper Selection Carefully separ ate the top and bottom halves of the main unit case. Once the cov er is removed, the parking light polarity jumper will be visible next to the parking light relay . Set the jumper f or the correct polarity output as described below , then reassemble the main unit case.
Page 8 - G 40RS 8-Pin Main Harness Pin 1 RED WIRE : Module P ower Input (+). Connect to a constant source of +12V Pin 2 GREEN/WHITE WIRE : Brak e Input (+). Connect to the wire that shows +12V when pressing the brak e. The Green/white wire is a safety shutdown wire that must be connected.
G 40RS - Page 9 2-Pin Blue Connector: V alet switch port. Mount switch where it is accessible from the driv er ’ s position. 2-Pin Red Connector: LED port. Mount LED where it may be easily seen from either side of the vehicle. 3-Pin White Door Lock Connector: Door lock port.
Page 10 - G 40RS D o o r L o c k D i a g r a m s R everse P olarity Adding Actuators P ositive Horn Honk Negative T rigger P ositive T rigger blue green.
© ScyT ek Electronics 2009 G 40RS 7-29-09 W i r i n g D i a g r a m For Factory Disarm pulse use the unlock wire Enable unlock Before Start location # 12 ScyTek Electronics 11627 Cantara Street North Hollywood, CA 91605 www.
An important point after buying a device Scytek electronic G40RS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scytek electronic G40RS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scytek electronic G40RS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scytek electronic G40RS you will learn all the available features of the product, as well as information on its operation. The information that you get Scytek electronic G40RS will certainly help you make a decision on the purchase.
If you already are a holder of Scytek electronic G40RS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scytek electronic G40RS.
However, one of the most important roles played by the user manual is to help in solving problems with Scytek electronic G40RS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scytek electronic G40RS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
