Instruction/ maintenance manual of the product I-SX 10 SL Scott
Go to page of 7
i-SX10 INSTRUCTION MANUAL.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s casing that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Features 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 17 18 GB-2.
21 Peripherals 20 GB-3 19.
Features & Peripherals Defined 16 V OLUME Turn the VOLUME dial clockwise to increase the volume and counter-clockwise to decrease the volume. 3 HR The HR button is used to adjust the hour when setting the clock. 5 MIN The MIN button is used to adjust the minute when setting the clock.
Operations Setting the Clock a. Press and hold the CLOCK SET button during power off or iPod/Aux mode. b. While holding the CLOCK SET button, press the HR button to adjust the hour and the MIN button to adjust the minute.
Specification RADIO SECTION Tuning ranges: FM 87.5 - 108 mHz AM 520 - 1630 kHz Antennas: AM Built - in ferrite bar FM Wire antenna GENERAL Output power: 1.5 W + 1.5 W Power consumption: 18 WATTS Power source: AC: 230V - 50Hz Unit: 300 (L) x 140 (D) x 165 (H) mm Weight: 2.
An important point after buying a device Scott I-SX 10 SL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scott I-SX 10 SL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scott I-SX 10 SL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scott I-SX 10 SL you will learn all the available features of the product, as well as information on its operation. The information that you get Scott I-SX 10 SL will certainly help you make a decision on the purchase.
If you already are a holder of Scott I-SX 10 SL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scott I-SX 10 SL.
However, one of the most important roles played by the user manual is to help in solving problems with Scott I-SX 10 SL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scott I-SX 10 SL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
