Instruction/ maintenance manual of the product G450 Avaya
Go to page of 305
Avaya Integrated Management Release 5.0 G250/G350/G450 Manager User Guide 14-300166 Issue 5 October 2007.
© 2007 A vaya Inc. All Right s Reserved. Notice While reasonable ef forts were made to ensure that the information in this document was complete and accurate at the time of printi ng, Avaya Inc. ca n assume no liability for any errors. Chan ges and corrections to the information in this document may be incorporated in futur e releases.
Issue 5 October 2007 3 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 The Purpose of This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Who Should Use This Guide . . . . . . . . . . . . . . . . . .
Contents 4 Avaya Integrated Ma nagement Release 4.0.1 Soft ware Update Manager Device Configuration - 802.1x Tab . . . . . . . . . . . . . . . . . . . . . . . . 44 Viewing Module Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Module Configuration - General Tab .
Contents Issue 5 October 2007 5 Ethernet LAN Port Configuration - General Tab . . . . . . . . . . . . . . . . . 90 Ethernet LAN Port Configuration - Advanced Tab . . . . . . . . . . . . . . . 93 Ethernet W AN Port Configuration . . . . . . . . . . . .
Contents 6 Avaya Integrated Ma nagement Release 4.0.1 Soft ware Update Manager Primary Interface Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Backup Interface Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Backup Interface Parameters Screen.
Contents Issue 5 October 2007 7 Chapter 10: Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . 177 Port Mirroring Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Configuring Port Mirroring . . . . . . . . . .
Contents 8 Avaya Integrated Ma nagement Release 4.0.1 Soft ware Update Manager Chapter 14: T rap Managers Configuration . . . . . . . . . . . . . . . . . 203 T rap Manager Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Configuring T rap Managers .
Contents Issue 5 October 2007 9 Viewing RIP Global Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 235 Configuring RIP Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 OSPF . . . . . . . . . . . . . . . . . . . . .
Contents 10 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Copying Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Moving Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 Deleting Rules .
Contents Issue 5 October 2007 11 Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 Policy Based Routing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 File Menu . . . . . . . . . . . . . . . .
Contents 12 Avaya Integrated Management Relea se 4.0.1 Software Update Manager.
Issue 5 October 2007 13 Preface Welcome to Avaya G250 /G350/G450 Manager . This chapter provides an int roduction to the structure and assumptions of this g uide. It includes the followin g sections: ● The Purpose of This Guide - A descriptio n of the goals of this guide.
Preface 14 Avaya Integrated Management Relea se 4.0.1 Software Update Manager ● Device Manager - An introductio n to the Avaya G250/ G350/G450 Device Manager , including a description of the user interface. ● Device Configuration - V iewing and modifying the dif ferent device configurations.
Organization of This Guide Issue 5 October 2007 15 ● Policy Based Routing - Det ailed descriptions of Policy Based Routing configuration that enable you to display and update Policy Bas ed Routing lists, Next Hop routing t ables, and Policy Enforcement Point s.
Preface 16 Avaya Integrated Management Relea se 4.0.1 Software Update Manager.
Issue 5 October 2007 17 Chapter 1: Introduction This chapter provides an introduction to the A vaya G250/G350/G450 Manager . It includes the following sections: ● Avaya G250/G350/G450 Manager Overview - An overvie w explaining the dif ferent aspects of A vaya G250/G350/G450 Device management.
Introduction 18 Avaya Integrated Management Relea se 4.0.1 Software Update Manager S t arting the A vaya G250/G350/G450 Manager This section provides instructions fo r starting A vaya G250/G350/G450 Manager .
The User Interface Issue 5 October 2007 19 Figure 1: Enter Network Password Dialog Box 2. Select the desired SNMP mode of operation. If SNMPv1 is selected, enter the correct SNMPv1 community string in the Community field.
Introduction 20 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Application T abs Y ou can access the three ma in components o f device management using the following Application T abs in the Avaya G250/G3 50/G450 Manager: ● Device Manager - V iew the Avaya G250/G350/G450 Device Manager for device configuration and Port RMON.
Managing Tables Issue 5 October 2007 21 Managing T ables The Avaya G250/G350/G450 Manager inte rface displays the sta tus of each row in a table. The following table shows a list o f symbols that can appear at the st art of a table row , with their corresponding explanations.
Introduction 22 Avaya Integrated Management Relea se 4.0.1 Software Update Manager.
Issue 5 October 2007 23 Chapter 2: Device Manager This chapter provides an introduction to th e Avaya G250/G350/G450 Device Manager . It includes the following sections: ● The G250/G350/G450 Device .
Device Ma nager 24 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The figure below shows the user interface, with it s various parts labeled.
The G250/G350/G450 Device Manager User Interface Issue 5 October 2007 25 When you place the cu rsor on a toolbar icon for one second, a lab el appears with the name of the button. Y ou can toggle the display of the application to olbar . T o toggle the display of the application toolbar , select Vie w > Toolbars > Show Application Toolbar .
Device Ma nager 26 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The table b elow displays the buttons on the Ge t/Set T oolbar and explains their functions and settings. Note: Note: The Apply/Cancel buttons only appear when chang es are made to the configuration.
The G250/G350/G450 Device Manager User Interface Issue 5 October 2007 27 T ree View The T ree View shows a hierarchical represent ation of the structure of the Avaya G250/G350/ G450 Device. T o select ports, modules or media module s, click their icons in the T ree View .
Device Ma nager 28 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Figure 3: A vaya G450 Chassis View Figure 4: A vaya G350 Chassis View Figure 5: A vaya G250 Chassis View Figure 6:.
The G250/G350/G450 Device Manager User Interface Issue 5 October 2007 29 Figure 8: A vaya G250 - DS1 Chassis V iew When viewing selected dialog boxes, the color of the port indicates the status of the port with regard to the application. The port selected to be the base port appears dark blue.
Device Ma nager 30 Avaya Integrated Management Relea se 4.0.1 Software Update Manager GBIC Port s The Ava ya MM314 media modules contain a GBI C (GigaBit Interface Converter) port that houses removable transceiver modules. The Chas sis View reflect s the management st atus of this ports.
Avaya G250/G350/G450 Modes Issue 5 October 2007 31 Dialog Area The area to the right of the Chassis V iew is where all dialog boxes, tables, and wizards first appear .
Device Ma nager 32 Avaya Integrated Management Relea se 4.0.1 Software Update Manager T o switch to configuration mode: Click . Or Select View > Configuration . T o switch to Port RMON mode: Click . Or Select View > Port RMON . Refreshing Device Information Y ou can refresh the informa tion in the A vay a G250/G350/G450 Device Manager .
Using Avaya G250/G350/G450 De vice Manager Help Issue 5 October 2007 33 Using A vaya G250/G350/G450 Device Manager Help This section explains how to use the on-line help in the Ava ya G250/G350/G450 Device Manager . The on-line he lp can be opened to the content s page or directly to a topic of interest.
Device Ma nager 34 Avaya Integrated Management Relea se 4.0.1 Software Update Manager.
Issue 5 October 2007 35 Chapter 3: Device Configuration This chapter explains how to view and set th e vari ous configuration p arameters relevant to th e Avaya G250/G350/G450 Device. It includes the following sectio ns: ● Viewing Device Configuration - V iew high-level information about the Avaya G250/G350/ G450 Device.
Device Confi guration 36 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Device Configuration - General T ab T o view the General tab of the Device Configu ration dialog box: Select Configure > Device Information . The Device Con figuration dialog box opens to the General tab.
Viewing Device Configuratio n Issue 5 October 2007 37 The following tab le provides a list of the fields in th e General tab of the Device Configuration dialog box and their descriptions. T able 8: Device Configuration Fields - General T ab Field Description System Name Logical name of the device, as define d on the SNMP agent of the device.
Device Confi guration 38 Avaya Integrated Management Relea se 4.0.1 Software Update Manager For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 . Current PMI IP Address IP address of Primary Management Interface.
Viewing Device Configuratio n Issue 5 October 2007 39 Device Configuration - Advanced T ab The Device Configuration Dialog Bo x - Advanc ed T ab provides you with network bridging information about the A vaya G250/G350/G450 Device .
Device Confi guration 40 Avaya Integrated Management Relea se 4.0.1 Software Update Manager For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 .
Viewing Device Configuratio n Issue 5 October 2007 41 Device Configuration - FRU T ab The Device Configuration Dialog Bo x - FRU T ab pr ovides you with information about the Field Replaceable Unit s (FRU) of the Avaya G450 Device.
Device Confi guration 42 Avaya Integrated Management Relea se 4.0.1 Software Update Manager PSU #1 Operational St atus The operational status of Power Supply 1. Possible values are: ● OK - The power supply is operational. ● Fault - The power supply is reporting fault s making it unable to function.
Viewing Device Configuratio n Issue 5 October 2007 43 Fan T ray Fault Message The fault message reported by the fan t ray . Possible values are: ● None ● Malfunction ● AC Fault ● Malfunction & AC Fault ● Single Fan Fault ● Multiple Fan Fault Memory #1 Displays a description of the memory inst alled in slot 1.
Device Confi guration 44 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Device Configuration - 802.1x T ab The Device Configuration Dialog Bo x - 802.1x tab provides yo u with support for the general configuration of the 802.1x ap plication.
Viewing Module Configuratio n Issue 5 October 2007 45 V i ewing Module Configuration The Module Configuration dialog box provides you with information specific to a selected module.
Device Confi guration 46 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Module Configuration - General T ab T o view the General tab of the Module Configuration dialog box f or a selected module: Click the module symbol in the T ree View .
Viewing Module Configuratio n Issue 5 October 2007 47 The following tab le provides a list of the fields in th e Module Configuration dialog bo x and their descriptions. T able 12: Module Configuration Dialog Box Field Description MM T ype Model of Media Module.
Device Confi guration 48 Avaya Integrated Management Relea se 4.0.1 Software Update Manager V i ewing Port Configuration The Port Configuration dialog box cont ains tabs that provide you with information specific to a selected port.
Viewing Port Configuration Issue 5 October 2007 49 Port Configuration - General T ab T o view the General tab of the Port Configuration dialog bo x for a selected port: Click the port symbol in the Chassis V iew . Or Click the port’s icon in the T ree View .
Device Confi guration 50 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Port T ype The port type; optionally includes refe rence to the mo dule to which it is attached and port connector type. Port Functionality The physical media type of the selected port.
Viewing Port Configuration Issue 5 October 2007 51 For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 . Auto Negotiation Status The operational st ate of the Auto-Negotiation protoco l between two stations.
Device Confi guration 52 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Port Configuration - Advanced T ab T o view the Advanced tab of the Port Configuration dialog bo x for a selected port: 1. Click the port symbol in the Chassis V iew .
Viewing Port Configuration Issue 5 October 2007 53 The following tab le provides a list of the fields in th e Port Configuration Dialog Box - Advanced T ab and their descriptions. T able 14: Port Configuration Dialog Box - Advanced T ab Field Description Port STP Mode Configured status of S panning T ree.
Device Confi guration 54 Avaya Integrated Management Relea se 4.0.1 Software Update Manager For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 .
Viewing Port Configuration Issue 5 October 2007 55 The 802.1x application support s two modes of operation: ● Port-based-authentication, which is backwards compatible to the previous 802.1x application behavior , and is used for a single-supplicant case.
Device Confi guration 56 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The following tab le provides a list of the fields in th e 802.1X table of the Port Configuration dialog box and their descriptions: T able 15: Port Configuration Dialog Box - 802.
Viewing Port Configuration Issue 5 October 2007 57 For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 . Reauthenticate Forces reauthentication o f the port. Checking the Reauthenticate checkbox and clicking Apply forces the port to be reauthenticated immediately .
Device Confi guration 58 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Port Configuration - LLDP T ab Link Layer Discovery Protocol (LLDP) is a nei ghbor discovery protocol, which allows Ethernet network devices to search for , and request info rmation from, other LLDP enabled de vices on the network.
Viewing Port Configuration Issue 5 October 2007 59 Figure 17: Port Configuration Dialog Box - LLDP T ab The following tab le provides a list of the fields in th e LLDP tab of the Port Configurat ion d.
Device Confi guration 60 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Configuring the External Modem Y ou can configure and view information specific to an ex te rnal modem connected via the Console or USB port s using the L2 Device Manager dialog bo x.
Configuring the Exte rnal Modem Issue 5 October 2007 61 T o view the L2 Device Manager for the Console port: In the Chassis V iew , click the Console icon. Or In the T ree View , click the Console icon . The L2 Device Manager for the Console port opens.
Device Confi guration 62 Avaya Integrated Management Relea se 4.0.1 Software Update Manager T o view the L2 Device manager for a USB port: In the Chassis Vi ew , click a USB icon. Or In the T ree View , click a USB icon. The L2 Device Manager for the USB port open s.
Configuring the Exte rnal Modem Issue 5 October 2007 63 Figure 20: G450 L2 Device Manager Dialog Box - USB Port Note: Note: The A vaya G450 Media Gateway has two USB ports. However , the Avaya G450 Manager cannot identify on which of the port s a modem is connected.
Device Confi guration 64 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Configuring the Dialer Y ou can configure an external dial-up modem att ached to the device using the Dialer Configuration dialog box. T o view the Dialer: Select Configure > Dialer .
Configuring the Dialer Issue 5 October 2007 65 Dialer Admin S tatus The admin st atus of the dialer . Possible values include: ● Enable ● Disable Persistent Delay The number of second s the dialer waits, after an error disrupt s the system, before attempting the rees t ablish a connection.
Device Confi guration 66 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Resetting the Device Y ou can reset the entire A vaya G250/G350/G450 Device, or one or more of it s individual modules. T o reset the entire Avaya G250/G350/G450 Device: 1.
Issue 5 October 2007 67 Chapter 4: Power over Ethernet This chapter provides information about Power o v er Ethernet (PoE) and includes the followin g sections: ● PoE Overview - An overview of Powe r over Ethernet functionality in A vaya G250/G350 devices.
Power over Ethernet 68 Avaya Integrated Management Relea se 4.0.1 Software Update Manager V iewing PoE Port Information The Chassis V iew provides immediate informatio n about PoE. Ports that are currently supplying power to IP telephones are lab eled with the icon.
Viewing PoE Information Issue 5 October 2007 69 The following tab le provides a list of the fields in th e Power tab of the Module Configuration dialog box and their descriptions: PoE Port Configuration T o view the PoE configuration on a port that supports PoE, select the Power tab in th e port’s configuration dialog box.
Power over Ethernet 70 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The following tab le provides a list of the fields in th e Power tab of the Module Configuration dialog box an.
Issue 5 October 2007 71 Chapter 5: Media Gateway Functions This chapter provides information about th e Avaya G250/ G350/G450’ s Media Gateway functionality and includes the following sections: ● Viewing Media Gateway Con figuration - An overview of Media Gateway functionality in Avaya G250/G350/G450 Devices.
Media Gateway Functi ons 72 Avaya Integrated Management Relea se 4.0.1 Software Update Manager V iewing Media Gateway Configuration The Media Gateway Configuration dia log box provides you with information about a selected module. T o view the configurati on of the Media Gateway: 1.
Media Gatewa y Configuratio n Issue 5 October 2007 73 The following tab le lists the fields in t he MG Config tab of the Module Config uration dialog box and their descriptions. T able 22: MG Config Parameters Field Description QOS Control The source of QoS control.
Media Gateway Functi ons 74 Avaya Integrated Management Relea se 4.0.1 Software Update Manager MGC Config The MGC Config t ab provides information about the Media Gateway Controller’s settings, IP address, and registration information.
Media Gatewa y Configuratio n Issue 5 October 2007 75 V iewing Media Module Configuration The Media Module Configuration dialog box enables you to view the hardware and firmware information for a specific Media M odule, and it s operational status.
Media Gateway Functi ons 76 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The following table lists the fields in the Media Module Configuration dialog box and their descript ion. A vaya Site Administration Avaya Site Administration (ASA) is an administrat ion tool for Avaya Call Processing call control software.
Issue 5 October 2007 77 Chapter 6: V oIP Engine Configuration This chapter provides information and in structio ns for viewing and configuring the V oIP Engine features. It includes the following sections: ● V oIP Overvi ew - An overview of V oIP Engine functionality within the Media Gateway .
VoIP Engine Configuration 78 Avaya Integrated Management Relea se 4.0.1 Software Update Manager V oIP Resources The V oIP resources tab provides administration p arameters common to all V oIP engines, such as QoS paramet ers, RTCP confi guration, an d RSVP configuration.
VoIP Overview Issue 5 October 2007 79 QoS QoS can be controlled either locally or remote ly . If control is local, it is possible to configure QoS, RTCP , and RSVP p arameters. If control is remote, QoS p arameters are determined by the MGC. The following tab le lists the QoS fields and their descriptions.
VoIP Engine Configuration 80 Avaya Integrated Management Relea se 4.0.1 Software Update Manager RTCP Monitoring RTCP is an IP protocol that is used to monitor the quality of R T P packets. Quality is measured in terms of delay , jitter , and packe t loss.
VoIP Overview Issue 5 October 2007 81 V oIP S t atus The V oIP st atus tab provid es information about a specific engine’ s operational status, jitter buf fer size, and number of sessions open. For A vaya G450 Devices, the VoIP stat us tab also provides the V oIP DSP Core St atus table.
VoIP Engine Configuration 82 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Figure 29: V oIP St atus T ab - G450 The information in the V oIP St atus tab is provided by the V oIP engine and is refreshed periodically . The following tab le lists the fields in t he V oIP St atus tab and their descriptions.
VoIP Overview Issue 5 October 2007 83 The following tab le lists the fields in t he V oIP DSP Core St atus table and their description s. For more information on the user interface, refer to “Using Dialog Boxes and T ables” on page 32 . V oIP St ate The administrative st ate of the DSP core (read only).
VoIP Engine Configuration 84 Avaya Integrated Management Relea se 4.0.1 Software Update Manager.
Issue 5 October 2007 85 Chapter 7: W AN Configuration This chapter provides information about conf iguring Avaya W AN Modules and include s the following sections: ● W AN Overview - An overview of WAN function ality in Avaya G250/G350/G450 Devices.
WAN Configuration 86 Avaya Integrated Management Relea se 4.0.1 Software Update Manager W AN Module Configuration The W AN Module Configurat ion dialog box provides you with information specific to a selected W AN module. T o view the configuration of a module: Click the module symbol in the T ree View .
E1/T1 Port Configuration Issue 5 October 2007 87 E1/T1 Port Configuration In addition to the Ethernet p orts fo und on an A vaya G25 0/G350/G450 Device, the W AN module may have E1/T1 port s. This sectio n provides information o n viewing and configuring E1/T1 po rt parameters.
WAN Configuration 88 Avaya Integrated Management Relea se 4.0.1 Software Update Manager The following tab le lists the E1/T1 Port C onfiguration fields and their descriptions: T able 31: E1/T1 Port Configuration Parameters Field Description Description A user-created text string describing the E1/ T1 port.
E1/T1 Port Configuration Issue 5 October 2007 89 Cablelength (T1 only) The recommended maximum cable length. Gain (T1 only) The gain on this interface . Gain represent s the level of signal boost required to transmit across the circuit at the maximum cable length.
WAN Configuration 90 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Ethernet LAN Port Configuration This section provides information on viewing and configuring parameters for the built-in Ethernet LAN port of the A vaya G250/G350 De vice (the Avaya G450 Device has two LAN ports).
Ethernet LAN Port Configuration Issue 5 October 2007 91 The following ta ble lists the fields in the Ethernet LAN Port Configu ration - General tab and their descriptions: T able 32: Ethernet LAN Port Configuration - General T ab Field Description Port Name The user can define a logical name to the port for ease of use.
WAN Configuration 92 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Auto Negotiation Mode The configured st ate of the Auto-Negotiation protocol between two stations. When enab led, Auto-Negotiation detects the highest common denominator for communication between endst ations, and sets both to the same highest common setting.
Ethernet LAN Port Configuration Issue 5 October 2007 93 Ethernet LAN Port Configuration - Advanced T ab The Advanced t ab of the Ethernet LAN configur ation dialo g box enables you to define port classification for the built -in Ethernet LAN port(s) on the A vaya G250/G350/G450 Device.
WAN Configuration 94 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Ethernet W AN Port Configuration This section provides information on viewing and configuring parameters for the built-in Ethernet W AN port of the Avaya G250/G350/G450 Device (the Avaya G450 Device has two W AN ports).
Ethernet WAN Port Configuration Issue 5 October 2007 95 Ethernet W AN Port Configuration - General T ab The General t ab of the Ethernet W AN Configuration dialog box enables you to set general functional pa rameters for the b uilt-in Ethernet W AN port.
WAN Configuration 96 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Administrative Stat us The administrative state of the selected p ort: ● Enable - The port is enabled and can tra nsmit and receive pac ke ts . ● Disable - The port is disabled and ca nnot transmit or receive pac ke ts .
Ethernet WAN Port Configuration Issue 5 October 2007 97 Encap sulation The W AN encapsulat ion method of the selected port. Po ssible values are: ● ARP A - The port uses the ARP A protocol to establish a connection. ● PPPoE - The port uses PPP over Ethernet to est ablish a connection.
WAN Configuration 98 Avaya Integrated Management Relea se 4.0.1 Software Update Manager Ethernet W AN Port Configuration - PPPoE Client T ab The PPPoE Client t ab enables you to view confi gura tion and status information for the PPPoE client available for the em bedded Ethernet W AN port.
Ethernet WAN Port Configuration Issue 5 October 2007 99 Note: Note: If the Encapsulation field of the Ethernet W AN Port Configuration - General T ab is set to ARP A , the PPPoE client is not supported and returns a result of N/A in all fields of the Ethernet W AN Port Configuration - PPPoE Client T ab.
WAN Configuration 100 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Ethernet W AN Port Configuration - DHCP Client T ab The DHCP Client tab enables you to view conf iguration and st atus in formation for the DHCP client available for the embed ded Ethernet W AN port.
Ethernet WAN Port Configuration Issue 5 October 2007 101 Subnet Mask The subnet mask allocated for t he DHCP client. The value of the mask is an IP address with all of it s network bits set to 1 and all o f its host bits se t to 0 . Client ID The client identifier used by the D HCP client.
WAN Configuration 102 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: If the Encapsulation field of the Ethernet W AN Port Configuration - General T ab is set to ARP A , the PPPoE client is not supported and returns a result of N/A in all fields of the Ethernet W AN Port Configuration - PPPoE Client T ab.
Ethernet WAN Port Configuration Issue 5 October 2007 103 Ethernet W AN Port Configurat ion - Extended Keep Alive T ab The Extended Keep Alive t ab of the Ethernet W AN Port Configuration dialog box enables you to set parameters for the Extend ed Keep Alive functionality of the A vaya G250/G350/G450 Device.
WAN Configuration 104 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Keep Alive ICMP Method The type of keep alive method used. Possible values are: ● icmpPing - ICMP Ping p ackets are exchan ged by the devices at the endp oints of the conne ction to verify connectivity .
Viewing Channel Group Informat ion Issue 5 October 2007 105 V i ewing Channel Group Information The Channel Group dialog box cont ains information specific to a selected Chan nel Group. The tabs that appe ar in the Channel Group dialog b ox are dependant on the encapsula tion method of the selected Channel Group.
WAN Configuration 106 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 38: Channel Group Dialog Box- Channel Gro up T ab The following tab le provides a list of the fields in.
Viewing Channel Group Informat ion Issue 5 October 2007 107 Advanced The Advanced t ab of the Channel Group s dialog box provides information about the channels that comprise the selected Channel Group a nd the Channel Group’ s speed factor . T o view the Advanced tab of the Channel Group dialog box: 1.
WAN Configuration 108 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager 3. Click Advanced . The Advanced t ab of the Channel Group dia log box opens.
Viewing Channel Group Informat ion Issue 5 October 2007 109 3. Click PPP . The PPP tab of the Channel Group dia log box appears. Figure 40: Channel Group Dialog Box - PPP T ab The following tab le pro.
WAN Configuration 110 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Channel Group - Frame Relay Information The Channel Group dialog box for Channel Group s using frame relay contains five tabs: ● Channel Group - Basic information about the Channel Group.
Viewing Channel Group Informat ion Issue 5 October 2007 111 ● Sub-Interfaces - Information about the Chan nel Group’s sub -frame relays. ● DLCIs - DLCI information for t he Channel Group. Frame Relay The Frame Relay tab of t he Channel Group dialog box provides information a bout the frame relay configuration of the Channel Group.
WAN Configuration 112 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following tab le provides a list of the fields in th e Frame Relay tab of the Channel Group dialog box and their descriptions: T able 41: Channel Group Dialog Box - Frame Relay Param eters Field Description LMI T ype Local Management Interface T ype.
Viewing Channel Group Informat ion Issue 5 October 2007 113 Sub-Interfaces The Sub-Interfaces t ab of the Channel Group dialog bo x provides information about the configuration of Frame Relay sub-interfaces in the Channel Group. T o view the Sub-Interfaces tab of the Channel Group dialog box: 1.
WAN Configuration 114 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 42: Channel Group Dialog Box - Sub-Interfaces T ab The Sub-Interfaces t ab of the Channel Group dialog box provide s a list of Frame Relay sub-interfaces in the upper section of the d ialog box.
Viewing Channel Group Informat ion Issue 5 October 2007 115 T o delete a Frame Relay sub-interface: 1. Click the Frame Relay sub-interface you want to delete. Note: Note: Y ou can only delete Frame Relay su b-interfaces on which no IP interfaces a re defined.
WAN Configuration 116 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager DLCIs The DLCIs tab o f the Channel Group dialog box provides information about the DLCIs (Dat a Link Connecti.
Viewing Channel Group Informat ion Issue 5 October 2007 117 Figure 43: Channel Group Dialog Box - DLCIs T ab The DLCIs tab o f the Channel Group dialog box provides a list of available DLCIs in the upper section of the dialog box. These DLCIs are lea r ned via LMI.
WAN Configuration 118 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following t able provides a list o f the fields in the DLCIs t ab of the Channel Group dialog box and their descriptions: T o configure the priority of DLCI traf fic, select the checkboxes for the priorities to use on the DLCI.
Managing Channel Groups Issue 5 October 2007 119 Managing Channel Group s The Channel Group s dialog box provides info rmation about existing channel gr oups and enables you to modify and delete chann el group s . In addition, you can start the Channel Gro up Wizard to create and edit channel group s.
WAN Configuration 120 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Each row of the Channel Group s table represen ts a valid Ch annel Group.
Managing Channel Groups Issue 5 October 2007 121 T o delete a channel group: 1. In the Channel Groups T able, select t he channel gro up which you want to delete. 2. Click Delete . A confirmation box opens. 3. Click Yes . The channel group is deleted.
WAN Configuration 122 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager We lcome Screen The Channel Group Wizard provides a simple, step-by-step met hod for creating or editing a Channel Group. Figure 45: Channel Group Wizard - W elcome Screen T o continue, click Next .
Managing Channel Groups Issue 5 October 2007 123 Select Name and Encap sulation Screen The Select Name and Encapsulat ion screen enables you to assign a name to the Channel Group and configure the encap sulation method.
WAN Configuration 124 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Select E1/T1 Port Screen The Select E1/T1 Port screen enable s you to select the E1/T1 port for your channel group.
Managing Channel Groups Issue 5 October 2007 125 Select Channels and S peed Screen The Select Channels and S peed screen enables you to sele ct channels for the new Channel Group. Figure 48: Channel Group Wizard - Sele ct Channels and Speed Screen T o select channels, check the checkboxes next to the channels you want included in the channel group.
WAN Configuration 126 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Confirmation Sc re e n The Channel Group Wizard displays a summary of th e information entered using the previous screens. Note: Note: The Channel Group has not yet been created.
USP Configuration Issue 5 October 2007 127 USP Configuration The USP (Universal Serial Port) is a physical inte rface designed to support multiple type s of connections with the same hardware. The A vaya G250/G350/G450 Device support s Media Modules containing USPs.
WAN Configuration 128 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 50: USP Dialog Box - Serial Port T ab The USP Configuration dia log box provide s conf igurat ion and st atus information about the USP .
USP Configuration Issue 5 October 2007 129 Advanced The Advanced t ab of the USP Configuration d i alog box provides advanced information about the USP configuration. T o display the Advanced tab of the USP Configurat ion dialog box: 1. Click the USP symbol in the Chassis View or the T ree View .
WAN Configuration 130 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 51: USP Configuration Dialog Box - Advanced T ab The following table list s the fields in the Ad vanced.
USP Configuration Issue 5 October 2007 131 DTR The port’ s Data T erminal Read y status. Possible values a re: ● Up - The port is physically prep ared to transmit and receive pac ke ts . ● Down - The port is not physically prep ared to transmit and receive pa ckets.
WAN Configuration 132 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager PPP The PPP tab of the USP Configuration dialog box provides informat ion about the USP’ s PPP configuration. T o display the PPP tab of the USP Configuration dialog box: 1.
USP Configuration Issue 5 October 2007 133 The following tab le lists the config uration fields in the PPP t ab of the USP Configuration dialog box and their descriptions: USP - Frame Relay Interface For USPs configured with a frame relay interf ace, the USP dialog box cont ains five tabs: ● Serial Port - Basic information a but the USP .
WAN Configuration 134 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager ● Sub-Frame-Relays - Information about the Channel Group’ s sub-frame relays. ● DLCIs - DLCI information for t he Channel Group. Frame Relay The Frame Relay tab of t he USP dialog box provides information about the frame relay configuration of the USP .
USP Configuration Issue 5 October 2007 135 The following t able provides a list of the fields in the Frame Relay t ab of the USP dialog box and their descriptions: T able 48: USP Dialog Box - Frame Relay Pa rameters Field Description LMI T ype Local Management Interface T ype.
WAN Configuration 136 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Sub-Frame-Relays The Sub-Interfaces t ab of the USP dialog box provides information about the configuration of Frame Relay sub-interfaces in the USP . T o view the Sub-Interfaces tab of the USP dialog box: 1.
USP Configuration Issue 5 October 2007 137 Figure 54: USP Dialog Box - Sub-Interfaces T ab The Sub-Interfaces t ab of the USP dialog box provides a list of Frame Relay sub-interfaces in the upper section of the dialog box. T o view confi guration information for a specific Frame Relay sub-interface, click the sub-interface in the lis t.
WAN Configuration 138 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager T o delete a Frame Relay sub-interface: 1. Click the Frame Relay sub-interface you want to delete. Note: Note: Y ou can only delete Frame Relay su b-interfaces on which no IP interfaces a re defined.
USP Configuration Issue 5 October 2007 139 DLCIs The DLCIs tab o f the USP dialog box provides information about the DLCIs in t he USP . T o view the DLCIs tab of the USP dialog box: 1. Click a USP symbol in the Chassis View o r T ree View . The USP dialog box opens with the Serial Port tab.
WAN Configuration 140 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 55: USP Dialog Box - DLCIs T ab The DLCIs tab o f the USP dialog box provides a list of available DLCIs in the upper section of the dialog box. These DLCIs are learned via LMI.
USP Configuration Issue 5 October 2007 141 T o delete a DLCI: 1. Click the DLCI you want to delete. 2. Click Delete . A confirmation dialog box opens. 3.
WAN Configuration 142 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring the ETR Port The Emergency T ransfer Relay (ETR) port provides a means of communication when there are severe network dif ficulties and other channels are down.
The Services Interf ace Issue 5 October 2007 143 The following tab le provides a list of fields in the ETR Inte rface form and their descriptions: The Services Interface The Services port cannot be con figured through the A vaya G250/G350/G450 Device Manager .
WAN Configuration 144 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring Backup Interfaces The Backup interface feature enables you to c onfigure backup interfaces for W AN interfaces. The backup interface feat ure includes a table for viewing all configured backup interfaces and a wizard for creating backup interfaces.
Configuring Backup Inte rfaces Issue 5 October 2007 145 T o configure a new Backup interface, click Wizard . The Backup Interface W izard opens. For information on the Backup Interface Wizard, refe r to “The Backup Interface Wizard” on page 145 . T o delete a Backup interface: 1.
WAN Configuration 146 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager We lcome Screen The Backup Interface Wizard provides a simple, step-by-step method for creating or editing a Backup interface. Figure 59: Backup Interface Wizard - W elcome Screen T o continue, click Next .
Configuring Backup Inte rfaces Issue 5 October 2007 147 Primary Interface Screen The Select Primary Interface screen enables y ou to select the interface to be backed up. Figure 60: Backup Interface Wizard - Select Primary Inte rface Screen T o select an interface to back up, select an interface name from t he Primary Interface pull-down listbox.
WAN Configuration 148 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Backup Interface Screen The Select Backup Interface screen enables you to assign an interface to back up the primary interface.
Configuring Backup Inte rfaces Issue 5 October 2007 149 Backup Interface Parameters Screen The Backup Interface Parameters screen en ables you to configure the conditions under which the Backup interface is activated and deactivated.
WAN Configuration 150 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Confirmation Sc re e n The Backup Interface Wizard displays a summary of the informatio n entered using the previous screens. Note: Note: The Backup Interface has not yet been cre ated.
Configuring Backup Inte rfaces Issue 5 October 2007 151 Dynamic CAC The Dynamic CAC dialog box enables you to co nfigure the Dynamic CAC function on a W AN interface. Dynamic CAC allows the A vaya G250/G350/G450 Device to control tra ffic flow between it self and a remotely located call controller .
WAN Configuration 152 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following tab le provides a list of the fi elds in the Dynamic CAC d ialog box and their descriptions. T able 54: Dynamic CAC Dialog Box Field Description Statu s The status of Dynamic CAC on the W AN interface.
Issue 5 October 2007 153 Chapter 8: Embedded T ools This chapter provides information and in structions for configuring the embedded tools of the Avaya G250/G350/G450. It includes the following sections: ● Configuring the DHCP Server - Instructions on configuring DHCP Server function ality .
Embedded Tools 154 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring Basic DHCP Options The DHCP Server - General T ab provides basic configuration options for activating the DHCP service.
Configuring the DHCP Server Issue 5 October 2007 155 T o refresh the tree view , click Refresh . T o apply changes to DHCP gene ral configurat ion, click Apply . T o create a new pool, click New Pool . The DHCP Server Configuration dialog b ox - New Pool tab opens.
Embedded Tools 156 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following table provides a list of th e fields in the DHCP Server Configuration - New Pool T ab and their descriptions: T o cancel changes, click Cancel . T o apply changes and create the ne w pool, click Apply .
Configuring the DHCP Server Issue 5 October 2007 157 The following tab le provides a list of the fiel ds in th e DHCP Server Configuration - Pool Configuration T ab an d their descriptions: T o refresh the field information, click Refresh . T o apply changes to the pool, click Appl y .
Embedded Tools 158 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 68: DHCP Server Configuration - General DHCP Options Config T ab The following tab le provides a list of t.
Configuring the DHCP Server Issue 5 October 2007 159 T o add a new DHCP confi guration option, click Add Option . T o refresh the t able view , click Refresh . T o apply changes to the table, click Apply . T o delete a DHCP configuration option, click Delete Option .
Embedded Tools 160 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring the TFTP Server TFTP (T rivial File T ransfer Protocol) service allows transfer of files across your network, usin g a connectionless, UDP-based protocol.
Configuring the Conver ged Network Analyzer Applicat ion Issue 5 October 2007 161 The following t able provides a list of the fields in the TFTP Server Configuration dialog box and their descriptions: For more information on the user interface, refer to “Using Dialog Boxes and T ables” on p age 32 .
Embedded Tools 162 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring an External T est Plug The CNA Configuration - T est Plug T ab provides configuration options for an external test plug.
Configuring the Conver ged Network Analyzer Applicat ion Issue 5 October 2007 163 T est Plug 1 Administrative St ate Administrative status of t he test plug. Possible values are: ● Enable ● Disable T est Plug 1 St atus The st atus of the T est Plug operation.
Embedded Tools 164 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring Schedulers The CNA Configura tion - Schedulers T ab provides configura tion options for scheduling test plugs.
Issue 5 October 2007 165 Chapter 9: VLANs This chapter provides the information and instru ctions you need to use VLANs. It includes the following sections: ● VLAN Configuration Overview - An overview of VLANs and their comp onents.
VLANs 166 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Master VLAN List The master VLAN list is a file on the network m anagement st ation that cont ains a list of glob ally defined VLANs and their name s. This list is only available when running Av aya Network Manager .
Configuring VLANs Issue 5 October 2007 167 Configuring VLANs T o view VLAN names, numbers, and component switch port s: Click . Or Select Configure > VLANs .
VLANs 168 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager VLAN T ree A tree providing a list of VLANs and their port s. The VLANs include all VLANs known on the network and all VLANs configured on the device. The port s listed under a VLAN include member ports a nd ports st atically bound to the VLAN.
Configuring VLANs Issue 5 October 2007 169 Selection List The Selection List cont ains a table with VLAN information about the current selection . For example, if you select a module in the T ree V iew or Chassis View , a list of the ports in the module with their VLAN information appears in the Se lect ion List.
VLANs 170 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Configuration Area The Port Configuration Area enables you to conf igure a port’s VLAN configuration. T o view the Port Configuration Area: Click Port Configuration .
Managing VLANs Issue 5 October 2007 171 Managing VLANs Y ou can create, rename, sy nchronize, and delete VLANs. ● Creating VLANs ● Renaming VLANs ● Synchronizing VLAN Names ● Deleting VLANs Binding Style The binding style configured on the port.
VLANs 172 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Creating VLANs T o create a new VLAN: 1. From the VLAN Configuration dialog box, click New . The Create VLAN dialog box opens. Figure 75: Create VLAN Dialog Box 2. Enter a VLAN number in the VLAN ID field.
Managing VLANs Issue 5 October 2007 173 Figure 76: Rename VLAN Dialog Box 3. Edit the VLAN’s name in the VLAN Name field. 4. Click OK . The VLAN is renamed. Synchronizing VLAN Names VLANs with the same VLAN number can be defined with dif ferent names on dif ferent devices in the network.
VLANs 174 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 77: VLAN Synchronize Dialog Box 2. Check the checkboxes next to the VLANs whose na mes you want to synchronize. ● T o select all the VLANs in the VLAN Synchronize dialog box, click Select All .
Managing Port VLAN Settings Issue 5 October 2007 175 Managing Port VLAN Settings Y ou can view and configure the PVID, T agging Mode, and Binding S tyle of selected port s using the Selection List and Port Config uration Area. In addition, you can configure the PVID of selected ports using the drag -and-drop method.
VLANs 176 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Using the Port Configuration Area T o configure the VLAN setting for ports on the device using the Po rt Configuration Area: 1. Click Port Configuration . The Port Configuration Area opens.
Issue 5 October 2007 177 Chapter 10: Port Mirroring This chapter provides information and in structions for using the Port Mirrorin g feature. It includes the following sections: ● Port Mirroring Overview - An overview of port mirroring. ● Configuring Port Mirroring - Instructions on adding, editing, and deleting a port mirroring pai r .
Port Mirroring 178 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The Port Mirroring Wizard This section provides det ailed information on eac h of the Port Mirroring Wizard’ s screens. T o continue to the next screen, click Next .
The Port Mirroring Wizard Issue 5 October 2007 179 Port Mirroring Wizard - Create W elcome The Port Mirroring Wizard provides a simple, st ep-by-step method for defining a Po rt Mirroring pai r . Figure 78: Port Mirroring Wizard - Create W elcome T o continue, click Next .
Port Mirroring 180 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Mirroring Wizard - Edit/Delete W elcome The wizard of fers the choice of de leting or editing the existing Port Mirroring co nfiguration. Figure 79: Port Mirroring Wizard - Edit/Delete W elcome Screen T o delete the existing Port Mirroring configuration: 1.
The Port Mirroring Wizard Issue 5 October 2007 181 Port Mirroring Wizard - Source Port Selection The Source Port Selection screen of t he Port Mirroring Wizard helps you select a source port for the Port Mirroring p air . Ports that can be selected as sou rces appear in white in the Chassis Vie w .
Port Mirroring 182 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Mirroring Wizard - Destination Port Selection The Destination Port Selection screen of the Port Mirrorin g Wizard helps you select a destination port for the Port Mirroring pair .
The Port Mirroring Wizard Issue 5 October 2007 183 Port Mirroring Wizard - Frames Direction Selection The Frames Direction Selection screen of the Port Mirroring Wizard enables you to select the traffic to be copied to the destination port.
Port Mirroring 184 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Mirroring Wizard - Confirmation The Port Mirroring Wizard displays a summary of the Port Mirroring information entered usin g the previous screens. The Port Mirroring config u ration has not yet be en uploaded to the device.
Issue 5 October 2007 185 Chapter 1 1: Port RMON This chapter explains the port RMON opti ons of the Avaya G250/G350/G45 0 Device. T o view Port RMON information, you must be in Port RMON mode. T o switch to Port RMON mode: Click . Or Select View > Port RMON .
Port RMON 186 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The Port RMON window includes three sections. At the top of the window is a pie chart. In the center of the window is a graph. At the botto m of the wind ow is a list of traf fic types.
Displaying the Port RMON Window Issue 5 October 2007 187 Scrolling within the Graph T o scroll within the graph, hold the left m ouse button down while moving the mo use from the graph in the direction you want to scroll . The graph scrolls in the selected direction.
Port RMON 188 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 189 Chapter 12: Switch Connected Addresses This chapter provides the information and instructions for viewing stat ions connected to the device. It includes the following sections: ● Switch Connected Addresses Overview - An overview of the Switch Connected Addresses feature.
Switch Connected Addresses 190 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 85: Switch Connected Addresses Window All the connections to the Av aya G250/G350/G450 Device are listed with the ir respective ports in the Switch Connected Addresses window .
Viewing the Switc h Connected Addresses Window Issue 5 October 2007 191 Sorting the List of St ations T o sort the list of stations, click on a column h eading to sort by that column. T o change the order of the sort (e.g. from ascending to descending), click the column heading of the field by which the list is sorted.
Switch Connected Addresses 192 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 193 Chapter 13: Port Redundancy This chapter provides the information and instructions for using the Port Redun dancy feature (not available in the G250). It incl udes the following sections: ● Overview of Port Redundancy - An overview of p ort redundancy .
Port Redundancy 194 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring Port Redundancy T o view the Port Redundancy dialog box: Click .
Adding a Port Redundancy Issue 5 October 2007 195 T o configure the device’s port redu ndancy configuration: 1. Enter an amount in the Switch Over field to determine initial switching time between port s in a port redundancy p air . 2. Select one of the Switch Back option button s.
Port Redundancy 196 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager 3. Select a port from the T ree View or the Ch assis View and drag it to th e Primary Port field. The port number name appears in the Prim ary Port field. 4. Select a port from the T ree View or the Ch assis View and drag it to th e Secondary Port field.
Port Redundancy Wizard Issue 5 October 2007 197 Port Redundancy Wizard - W elcome The Port Redundancy Wizard pr ovides a simple, step-by-step met hod for creating a Port Redundancy . Figure 87: Port Redundancy Wizard - W elcome Screen T o continue, click Next .
Port Redundancy 198 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Redundancy Wizard - Primary Port Selection The Primary Port Selection screen of th e Port Redundancy Wizard help s you select a primary port for the Port Redundancy .
Port Redundancy Wizard Issue 5 October 2007 199 Port Redundancy Wizard - Secondary Port Selection The Secondary Port Selection screen o f the Port Redundancy Wizard allows you t o select a secondary port for the Po rt Redund ancy . Ports tha t can be sele cted as secondary port s appea r white in the Chassis V iew .
Port Redundancy 200 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Port Redundancy Wizard - Name and T ype The Port Redundancy Name and T y pe screen of the Port Redundancy Wizard allows you to assign a name for the Port Redundancy .
Port Redundancy Wizard Issue 5 October 2007 201 Port Redundancy Wizard - Confirmation The Port Redundancy Wizard displays a summary of the Po rt Redunda ncy information entered using the previous screens. T he Port Redundancy has not yet been create d.
Port Redundancy 202 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Deleting Port Redundancies T o delete an existing Port Redundancy: 1. Select a Port Redundancy from the Port Redundancy dialog box. T o select more than one Port Redundancy , press CTRL while clicking on additional Port Redundancies.
Issue 5 October 2007 203 Chapter 14: T rap Managers Configuration This chapter provides the information and instru ctions for co nfiguring trap managers for the Avaya G250/G350/G450 Device. It includesthe following se ctions: ● T rap Manager Overview - An overview of trap managers.
Trap Managers Config uration 204 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring T rap Managers T o view the Trap Managers table for the d evice: Click . Or Select Configure > Trap Managers . The Device T rap Managers table open s.
Configuring Trap Managers Issue 5 October 2007 205 Enable SNMP Authentication-Failure trap When checked, enables SNMP Authentication-Failure trap. Enable RTP QoS trap Wh en checked, enables RTP QoS trap . Enable RTP QoS Fault trap When checked, enables R TP QoS Fault trap.
Trap Managers Config uration 206 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The first row in the Device T rap Managers T able is reserved for the Dynamic T rap Manager entry . The Dynamic T rap Manager is discovered automatically and the IP addre ss is read-only .
Issue 5 October 2007 207 Chapter 15: Routing Manager This chapter provides an introduction to th e Avaya G250/G35 0/G450 Routing Manager . It includes the following sections: ● TheRouting Manager User Interf ace - An introduction to the A vaya G250/G350/G450 Routing Manager user interface.
Routing Manager 208 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The figure below shows the user interface, with it s various parts labeled.
TheRouting Manager User Int erface Issue 5 October 2007 209 T ree View The T ree View shows the applicab le configuration windows for the A vaya G250/G350/G450 Device’s routing function. T o expand the view of the element when it is co ntracted, or to contract the view when it is expanded in th e tree: Double-click the element.
Routing Manager 210 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager T able/Form Area The right side of the application window is th e T able/Form Area. This area can be resized by dragging the vertical splitter bar with the mouse. All t ables and forms appear in the T able/Forms Area.
Saving Table Information in a File Issue 5 October 2007 211 Creating New T able Entries T o create a new table entry: 1. Click . Or Select Edit > Insert Row . A new t able entry is created. 2. Enter data in the fields as required. 3. Click to update the rou ter .
Routing Manager 212 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Saving Configuration Changes There are two levels of applying rou ting configuration changes to the rou ter: ● Running Changes - Changes are applied to the rou ter , but are not saved.
Using Avaya G250/G350/G450 Ro uting Manager Help Issue 5 October 2007 213 Using A vaya G250/G350/G4 50 Routing Ma na ger Help This section explains how to use the on-line help in the Ava ya G250/G350/G450 Routing Manager . The on-line help can be opened to the contents p age or directly to a topic of interest.
Routing Manager 214 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 215 Chapter 16: Layer 2 The Layer 2 folder provides ac cess to the following window: ● Layer 2 Interfaces Layer 2 Interfaces T o display the layer 2 interfaces: Select Layer 2 > Interfaces . The Layer 2 Interfaces window opens.
Layer 2 216 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following pa rameters are displayed: The fields in the Layer 2 Interfaces wind ow , except for Interface Description , are read-only . T able 68: Layer 2 Interfaces W indow Parameters Field Description Interface Name The name of this Layer 2 interface.
Issue 5 October 2007 217 Chapter 17: IP Route The IP Route folder provides access to the following windows: ● Displaying IP Global Parameters ● Configuring IP Interfaces ● Viewing t he Routing T.
IP Route 218 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Displaying IP Global Parameters T o display and update the IP global p arameters: Select IP Route > IP Global Parameters .
Configurin g IP Interfaces Issue 5 October 2007 219 Configuring IP Interfaces IP interfaces represent the logical connections of the device to the IP nets/subnet s attached to it. Each IP interface corresponds to o ne net/subnet. Y ou can create either a st atic IP interface or an unnumbered IP interface.
IP Route 220 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager IP NetMask The IP network mask of the attache d net/subnet. Layer 2 Interface name The name of the Layer 2 interface wit h which this subnet is associated.
Configurin g IP Interfaces Issue 5 October 2007 221 Y ou can create, modif y , and delete IP interfaces. For more information on editing t ables, refer to “Editing T ables” on page 210 . Note: Note: IP Address , IP NetMask , Layer 2 Interface Name , and Status must be defined before creating an IP interface.
IP Route 222 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: The list of VLANs allocated in the system is displaye d in the Layer 2 Interface Name field. Note: Note: IP Address for unnumbered interfaces or fo r interfaces receiving their IP address from a DHCP server or IPCP session cannot be modified.
Viewing the Routing Table Issue 5 October 2007 223 The following pa rameters are displayed: V i ewing the Routing T able T o display and update the Routing T able: Select IP Route > Routing Table . The Routing T able window opens. S tatic routes are displayed as read-o nly in th e Routing T able.
IP Route 224 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 98: Routing T able The following pa rameters are displayed: T able 73: Routing T able Parameters Field Description Destination The destination network IP address of this route.
Viewing the Routing Table Issue 5 October 2007 225 Y ou can create, modify , or delete Routing T able static entries. For more information on editing tables, refer to “Editing T ables” on p age 210 . Y ou can limit the table en tries displayed. Protocol The protocol through which t he route was learned.
IP Route 226 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager T o start the display of entries from a specifie d interface and IP address: 1. Click . Or Select Action > Start Point . The S tart Point d ialog box opens. Figure 99: Routing T able St art Point Dialog Box 2.
Viewing the Stat ic Routing Table Issue 5 October 2007 227 Next Hop The address of the next router of th is route, via which the destination of this route is reached.
IP Route 228 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: When editing an existing row , the following fields cannot be changed: Destination , Netmask , Next Hop , Layer 2 Interface Nam e , and Static Preference .
Viewing the ARP Table Issue 5 October 2007 229 The following pa rameters are displayed: Y ou can create or delete ARP table e ntries. For more information on editing t ables, refer to “Editing T ables” on page 210 . Y ou can limit the table entri es displayed.
IP Route 230 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager T o view all the entries in the ARP T able: Click . Or Select View > Refresh .
Configuring GRE Tunneling Issue 5 October 2007 231 Remote IP The IP address of the remote endpoint of the tunnel. Note: Note: The local IP and remote IP must be dif ferent.
IP Route 232 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Y ou can create or delete GRE tunnel t able entries. For more information on editin g t ables, ref er to “Editing T ables” on page 210 . Keep Alive Retrie s The number of keep alive request s sent before an interface becomes inactive.
DHCP Issue 5 October 2007 233 DHCP The DHCP folder provides access to the following windows: ● Viewing DHCP/BOOTP Global Parameters ● Configuring DHCP/BOOTP Parameters V iewing DHCP/BOOTP Global Parameters T o display and update the DHCP/BOOTP global p arameters: Select IP Route > DHCP > DHCP/BOOTP Glo bal Parameters .
IP Route 234 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Configuring DHCP/BOOTP Parameters T o display and update DHCP/BOOTP parameters: Select IP Route > DHCP > DHCP/BOOTP Parameters . The DHCP/BOOTP Parameters window opens.
RIP Issue 5 October 2007 235 Note: Note: The available values of Layer 2 Interface Name do not include the Layer 2 interface on which dynamic IP address are defined . Y ou can create, modify , or delete DHCP/BOOTP parameters. For more information on editing tables, refer to “Editing T ables” on p age 210 .
IP Route 236 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following pa rameters are displayed: Y ou can modify RIP Global Parameters by checking boxes as desire d. Configuring RIP Interfaces T o define and display RIP interfaces: Select IP Route > RIP > RIP Interfaces .
RIP Issue 5 October 2007 237 Reference IP Address The IP address borrowed for an unnumb ered interface. A value of 0.0.0.0 indica tes either that the IP address is not valid , or that the IP interface is borrowing the IP address from a dynamic IP interface whose IP address is n ot allocated yet.
IP Route 238 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: In the Send field, selecting ‘ listen-only ’ or ‘ talk-listen ’ will prevent updating the Default Route Metri c field. Y ou can modify RIP interfaces.
OSPF Issue 5 October 2007 239 V iewing OSPF Global P arameters T o define and display OSPF Global para meters: Select IP Route > OSPF > OSPF Global Parameters .
IP Route 240 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Y ou can modify OSPF Global Paramet ers. Note: Note: After upd ating the Router ID field, a message is displayed warning th at the operation might cause the OSPF dat abase to reset.
OSPF Issue 5 October 2007 241 T ype The type of interface: ● Point To Point ● Point To Multipoint ● Broadcast Stat e The interface st ate of the OSPF interface: ● Down - OSPF is not active on the inte rface. ● Waiting - The identity of the designated router for this subn et is not yet determined.
IP Route 242 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Y ou can modify OSPF interfaces. For more information on ed iting tables, refe r to “Editing T ables” on page 210 . Configuring OSPF Area Parameters T o define and display OSPF Area Parameters: Select IP Route > OSPF > OSPF Area Parameters .
OSPF Issue 5 October 2007 243 The following pa rameters are displayed: Y ou can modify OSPF Area p arameters. V iewing the OSPF Link S t ate Dat abase T o display the OSPF Link S tate Databa se: Select IP Route > OSPF > OSPF Link State Database .
IP Route 244 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following pa rameters are displayed: The parame ters in the OSPF Link S tate Dat abase window are read-only . Y ou can limit the table entri es displayed. T o start the display of entries from a specified in terface and IP address: 1.
OSPF Issue 5 October 2007 245 T o view all the entries in the OSPF Link S tate Database : Click . Or Select View > Refresh . All entries appear in the t able. V iewing the OSPF External Dat abase T o display the OSPF External Database window: Select IP Route > OSPF > OSPF External Da tabase .
IP Route 246 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager V iewing OSPF Neighbors T o display the OSPF Neighbors window: Select IP Route > OSPF > OSPF Neighbors .
VRRP Issue 5 October 2007 247 VRRP The VRRP folder provides access to the following windows: ● Viewing VRRP Global Parameters ● Viewing t he VRRP T able V iewing VRRP Global Parameters VRRP (Virtual Route r Redundancy Protocol) provides a meth od for configuring a redundancy between routers.
IP Route 248 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager V iewing the VRRP T able T o define and display the VRRP table: Select IP Route > VRRP > VRRP Table .
VRRP Issue 5 October 2007 249 T o associate IP addresses with a selected virtual router: 1. Select a virtual router in the VRRP ta ble. 2. Ensure that the Form Vi ew is visible. 3. Enter the IP address to associate with the selected router in the textbox under the IP Addresses listbox in the Form V iew .
IP Route 250 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Header Compression The Header Compression folder provides a ccess to the following windows: ● Configuring cR TP Interfaces ● Configuring TCP Header Compression Interfaces Note: Note: All header compression methods apply to point-to-point interfaces only .
Header Compress ion Issue 5 October 2007 251 Y ou can modify cR TP parameters on PPP interfaces. For more information on editing t ables, refer to “Editing T ables” on page 210 . Configuring TCP Header Compression Interfaces The Ava y a G250/G350/G450 Device support s TCP header compression, enabling compression of all TCP traf fic.
IP Route 252 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following pa rameters are displayed: For PPP and Frame Relay interfaces, a vailable header compression values are as follows: T able 90: TCP Header Compression Interfaces T able Parameters Field Description Layer 2 Interface Name The name of the selected interface.
Issue 5 October 2007 253 Chapter 18: Policy Based Routing Manager This chapter provides an introduction to the Avaya G250 /G350/G450 Policy Based Routing Manager . It includes the following sections: ● The Policy Based Routing Mana ger User Interface - An introduction to the A vaya G250/ G350/G450 Policy Based Routi ng Manag er user interface.
Policy Based Routing Manager 254 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The figure below shows the user interface, with it s various parts labeled.
The Application Editor Tool Issue 5 October 2007 255 T ree View The T ree View shows the applicab le configuration windows for the Avaya G250/G35 0/G450 Device’s Policy Based Routing funct ion. T o expand the view of an element when it is contract ed, or to contract the view when it is expanded in th e tree: Double-click the element.
Policy Based Routing Manager 256 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Applied Changes After finalizing all ch anges to a dialog box or tabl e, the changes must be sent to the router . T o send the changes to the router , click .
Issue 5 October 2007 257 Chapter 19: Policy Based Routing This chapter describes the Poli cy Based Routing function in A vaya G250/G350/G450 Manage r and how to use it to add, modify , and delete policie s and rules.
Policy Based Routing 258 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Using the T ree Vi ew This section provides an explanation of the T ree View hierarchy and how to use it.
Using the Table View Issue 5 October 2007 259 Policy Based Routing List The Policy list provides a list of policies created for a selected module, and displays inf ormation about each of th e policies.
Policy Based Routing 260 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Adding Policies T o add a policy: 1. Click . Or Select File > New List and choose a list type. A n ew policy appears in the policy list. 2. Define the user defined fields in the Policy List.
Using the Table View Issue 5 October 2007 261 ● Copying Rules ● Moving Rules ● Deleting Rules T o view the Rules list, select the policy in the T ree View whose ru les you wish to view , and then select the Policy Based Routing Rules tab in the T able V iew .
Policy Based Routing 262 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Dst Wildcard Destination Address Wildcard. A wildcard that can modify the defin ition of the destination addresses to which this rule applies. Y ou can change the Destination Address Wildcard using the pu ll-down list or enter a user defined wildcard.
Using the Table View Issue 5 October 2007 263 Src Application Source Application. The source application protocol of the p ackets to which this rule applies. Select an application from the pull-d own list. Note: Note: S pecifying a source application disables the Fragment checkbox.
Policy Based Routing 264 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Adding Rules T o add a new rule to a policy: 1. Click . Or Select Edit > Add . The new rule appears in the Rules List. 2. Define the fields in the table cells.
Using the Table View Issue 5 October 2007 265 Moving Rules Y ou can move a rule’s position in a policy or move it from one policy to another . To m o v e a r u l e : 1. Select a rule from the Rules List. T o select more than one rule, press SHIFT while selecting additional rules.
Policy Based Routing 266 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: The following interfaces are supported as next hop s: ● W AN Fast Ethernet, if it is configured ei ther with encapsulation PPPoE or with no encapsu lation but running DHCP client.
Using the Table View Issue 5 October 2007 267 Modifying Routes T o modify a route: 1. Click the route you want to modify . 2. Define the route’s fields in the table cells. For more informat ion on the rout e’ s fields refer to “Next Hop List” on page 265 .
Policy Based Routing 268 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Note: Note: If a route is not selected, the moved route will be added to the bott om of the t able. Deleting Routes T o delete a route: 1. Select a route from the Next Hop t able.
Using the Table View Issue 5 October 2007 269 The following tab le provides a list of the fi elds in th e Policy Enforcement Point s T able: T o modify a Policy Enforcement Points tab le, se lect policies for interfaces using the p ull-down list in the Active PBR field.
Policy Based Routing 270 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Figure 124: Policy Based Routing List Co nfiguration Dialog Box Note: Note: Only the Name field is configurable in the Policy Based Routin g List Configuration Dialog Box.
Using the Table View Issue 5 October 2007 271 Next Hop List Configuration T o view the Next Hop List Confi guration form, select the policy li st whose configuration form you wish to view from the T ree View , and then the Configuration tab in the T able V iew .
Policy Based Routing 272 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Using Address Wildcards Wildcards are used to mask all or part of a sour ce or destination IP address. Using wildcards, you can create filters for IP addresses.
Using the IP Simulate Funct io n Issue 5 October 2007 273 Note: Note: IP Simulate only operates on saved policies. Ensure that any changes to the policy have been applie d before testing packe ts. Note: Note: IP Simulate can only be used when a specific Rule s List is selected in the T ree Vie w .
Policy Based Routing 274 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager The following tab le provides a list of the fi elds in IP Simulate and their descrip tions: T able 99: IP Simulate Fields Field Description Source IP The IP address of the device from which the simulated packet originated.
Using the IP Simulate Funct io n Issue 5 October 2007 275 Use QoS p arameters Enables QoS parameters for forw arding the packet. The possible options are: ● Checked ● Unchecked If the Use QoS Parameters box is checked the IP simulate function uses the values in the DSCP and 802.
Policy Based Routing 276 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 277 Chapter 20: Applications Editor T ool This chapter provides instructions on how to use the Application Editor T ool and how to customize application protocols. It cont ains the following sections: ● Applications Editor Overview - An overview of the Applications Editor .
Applications Editor Tool 278 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager T o open the Applications Editor: Select Tools > Applications Editor .
Using the Applications Editor Issue 5 October 2007 279 Adding Application Protocols T o add a new application protocol: 1. Click . Or Select Edit > Add . A new p rotocol appears in the Application Protocols T ool. 2. Define the application protocol using the fields in the t able.
Applications Editor Tool 280 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Report s Y ou can create an ASCII report of the applicatio n protocols listed in the Applications Editor . The report is a text file with the information in each colu mn separated by t abs.
Device Manager Menus Issue 5 October 2007 281 Appendix A: Menus This appendix gives the full structure of t he menus in the A vaya G250/G350/G450 Manager .
Menus 282 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager File Menu Vi e w M e n u Configure Menu T able 101: File Menu - Device Manager Item Description Exit Exits the A vaya G250/G350/G450 Manager . Note: Note: This function is not supported when running the Avaya G250/G350/G450 Man ager in a web browser .
Issue 5 October 2007 283 Port Redundancy Displays and enables configuration of port redunda ncies. Port Mirroring Allows copying of all transmitted and received p ackets from one port to another . T rap Managers Displays managers and traps configuration informa tion.
Menus 284 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Actions Menu T ools Menu T able 104: Actions Menu - Device Manager Item Description 802.1X > Initialize Selected Port s Initialize 802.1x security on the selected ports (not displayed for Avaya G450 Devices).
Routing Manager Menus Issue 5 October 2007 285 Help Menu Routing Manager Menus This section provides the menu structure of the Av aya G250/G350/G450 Routing Manager .
Menus 286 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Edit Menu Vi e w M e n u Action Menu T able 108: Edit Menu - Routing Manager Item Description Undo Undoes changes made to the t able or form currently displayed. Copy Copies the selected information to the clipboard.
Policy Based Routing Menus Issue 5 October 2007 287 Help Menu Policy Based Routing Menus This section provides the menu structure of G250/G350/G450 Policy Based Ro uting.
Menus 288 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Edit Menu Vi e w M e n u T ools Menu T able 1 13: Edit Menu - Policy Based Routing Item Description Revert Clear uncommitted changes and revert to the last saved configuration of a list.
Applications Editor Menus Issue 5 October 2007 289 Help Menu Applications Editor Menus This section provides the menu structur e for the Applications Editor tool. ● File Menu ● Edit Menu ● Help Menu File Menu T able 1 16: Help Menu - Policy Based Routing Item Description Content s Opens the on-line help contents page.
Menus 290 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Edit Menu Help Menu T able 1 18: Edit Menu - Applications Editor Item Description Refresh Refreshes the information in the current table . Add Add a new entry to the current t able.
Issue 5 October 2007 291 Appendix B: W e b Management This appendix provides inst ructions for managi ng A vaya G350/G450 Devices via the Internet and conta ins the following sections: ● Web Ma nagement Overview - An overview on W eb Management.
Web Manageme nt 292 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 293 Appendix C: ICMP Packet T ypes & Codes This appendix list s the various ICMP Packet T ypes and Code s as used in “Using IP Simulate” on page 273 .
ICMP Packet Types & Codes 294 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager Source Quench 40 Redirect 5- - Redirect for Network 50 Redirect for Host 51 Redirect for T ype-of-.
ICMP Packet Type/Code List Issue 5 October 2007 295 Mobile Registration Request 35 -- Mobile Registration Reply 36 -- Domain Name Request 37 0 Domain Name Reply 38 0 Skip Algorithm Discovery Protocol .
ICMP Packet Types & Codes 296 Avaya Integrated Man agement Release 4.0.1 Soft ware Update Manager.
Issue 5 October 2007 297 x Index Index Numerical 802.1x device configuration . . . . . . . . . . . . . . . 44 port configuration . . . . . . . . . . . . . . . . 54 A Adding application protocols . . . . . . . . . . . . . . 279 managers to table . . . .
298 Avaya Integ rated Management Rele ase 4.0.1 Software Update Manager Index viewing table . . . . . . . . . . . . . . . . . . 11 9 Channel Group Wizard Confirmation scre en . . . . . . . . . . . . . . 12 6 overview . . . . . . . . . . . . . . . . . .
Issue 5 October 2007 299 x Index traps . . . . . . . . . . . . . . . . . . . . . . 204 updating . . . . . . . . . . . . . . . . . 176 , 202 Device configuration 802.1x tab . . . . . . . . . . . . . . . . . . . 44 Advanced tab . . . . . . . . . . . . .
300 Avaya Integ rated Management Rele ase 4.0.1 Software Update Manager Index intended users . . . . . . . . . . . . . . . . . 13 organization . . . . . . . . . . . . . . . . . . 13 purpose . . . . . . . . . . . . . . . . . . . . 13 H Header compression cRTP header compression .
Issue 5 October 2007 301 x Index Channel Groups . . . . . . . . . . . . . . . . 11 9 devices via th e Internet . . . . . . . . . . . . . 291 tables . . . . . . . . . . . . . . . . . . . . . 21 Manual intended users . . . . . . . . . . . . . . . . . 13 organization .
302 Avaya Integ rated Management Rele ase 4.0.1 Software Update Manager Index moving a rule . . . . . . . . . . . . . . . . . . 265 overview . . . . . . . . . . . . . . . . . . . . 260 PEPs table . . . . . . . . . . . . . . . . . . . . 268 Pie chart .
Issue 5 October 2007 303 x Index introduction . . . . . . . . . . . . . . . . 207 , 253 menus . . . . . . . . . . . . . . . . . . . . . 285 resetting . . . . . . . . . . . . . . . . . . . . 212 Table Area . . . . . . . . . . . . . . . . 210 , 255 Toolbar .
304 Avaya Integ rated Management Rele ase 4.0.1 Software Update Manager Index Routing Manager . . . . . . . . . . . . . 208 , 254 Toolbar buttons Routing Manager . . . . . . . . . . . . . 208 , 254 Traffic Port RMON graph . . . . . . . . . . . . . . .
Issue 5 October 2007 305 x Index overview . . . . . . . . . . . . . . . . . . . . 77 QoS . . . . . . . . . . . . . . . . . . . . . . 79 Resources tab . . . . . . . . . . . . . . . . . 78 RSVP . . . . . . . . . . . . . . . . . . . . . 80 RTCP . . . . .
An important point after buying a device Avaya G450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avaya G450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avaya G450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avaya G450 you will learn all the available features of the product, as well as information on its operation. The information that you get Avaya G450 will certainly help you make a decision on the purchase.
If you already are a holder of Avaya G450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avaya G450.
However, one of the most important roles played by the user manual is to help in solving problems with Avaya G450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avaya G450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
