Instruction/ maintenance manual of the product TA2047B Scosche
Go to page of 4
1 142TA2047B IN-DASH INST ALLA TION KIT FOR 2001-UP TOY OT A RAV4 / 2000-UP MR2 SPYDER 1987-UP TOYO TA VEHICLES Rear Speaker Plug 1 = Right Rear Negative 2 = Left Rear Negative 3 = Right Rear Positive 4 = Empty 5 = Empty 6 = Left Rear Positive CAR STEREO CONNECTOR PROVIDE EASY CONNECTION OF YOUR CAR STEREO TO FACTORY WIRING HARNESS.
2 DIN RADIO INSTALLA TION (DETACHABLE FACE/PULL OUT) Slide the mounting sleeve (metal shroud) into the panel’s radio opening and bend all available mounting tabs outward (see inset). Once the radio mounting sleeve has been fastened to the kit panel, slide the radio into the mounting sleeve until it locks into place.
RAV4 BRACKET ASSEMBL Y BACK VIEW OF MOUNTING P ANEL BACK VIEW OF POCKET RAV4 BRACKET INST ALLATION 1. The bracket is only used for installation in T oyota RA V4. 2. Align the snaps of RA V4 mounting bracket with the pocket slots. 3. When aligned, snap bracket carefully into position until locked.
2001-UP TOYOT A RAV4 RADIO REMOVAL AND IN-DASH INSTALLA TION: Note: The factory radio provision is for a double ISO/DIN style radio. 1. Extract (4) 5mm Hex screws from radio trim bezel and pry off using panel removal tool. 2. Extract (4) 10mm bolts securing radio, pull away , disconnect, and remove.
An important point after buying a device Scosche TA2047B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scosche TA2047B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scosche TA2047B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scosche TA2047B you will learn all the available features of the product, as well as information on its operation. The information that you get Scosche TA2047B will certainly help you make a decision on the purchase.
If you already are a holder of Scosche TA2047B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scosche TA2047B.
However, one of the most important roles played by the user manual is to help in solving problems with Scosche TA2047B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scosche TA2047B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
