Instruction/ maintenance manual of the product DPX130 Scientific Atlanta
Go to page of 24
Webstar Cable Modem Model DPX130 Cable Modem.
2 Read and Retain These Instructions • Read all of the instructions before you operate this equipment. Give particular attention to all safety precautions. Retain the instructions for future reference. • Comply with all warning and caution statements in the instructions.
3 Cleaning the Equipment Before cleaning this equipment, unplug it from the electrical outlet. Use a damp cloth to clean this equipment. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this equipment.
4 Liquid or Moisture Do not expose this equipment to liquid or moisture. Do not place this equipment on a wet surface. Do not spill liquids on or near this equipment. Lightning and Power Surges Plug your equipment into a surge protector in order to reduce the risk of damage from lightning strikes and power surges.
5 Equipment Checklist Before you install your cable modem, verify that the carton contains: • One WebSTAR™ Model DPX 130 Cable Modem • One twisted pair Ethernet cable (CAT5/RJ-45) • One USB ca.
6 Overview Contents Overview ................................................................... 6 Getting Started ........................................................ 7 System Requirements ............................................. 8 WebSTAR Cable Modem Front Panel .
7 Getting Started Contacting Y our Local Cable Service Provider You need to set up an Internet access account with your local cable service provider in order to use your cable modem.
8 System Requirements Introduction This section provides hardware and software requirements. Minimum System Requirements for PCs • PC with a Pentium MMX 133 processor or greater • 32 MB of RAM • Netscape or Internet Explorer • 3.5-in. disk drive or CD-ROM drive Minimum System Requirements for Macintosh • MAC OS 7.
9 W ebST AR Cable Modem Front Panel 1 Power Illuminates solid green to indicate that power is being applied to the cable modem 2 PC Illuminates solid green to indicate that an Ethernet/USB carrier is .
10 W ebST AR Cable Modem Back Panel Back Panel Components 1 Cable In F-Connector connects to an active RF coaxial cable signal from your cable service provider 2 USB 12 Mbps USB port connects to the U.
11 Connection Diagram Installation Follow these steps for proper installation. 1. Power down your PC and unplug it from the power source. 2. Connect the active RF coaxial cable to the CABLE IN connector. Use an optional cable signal splitter to add a TV, a DHCT or set-top converter, or a VCR.
12 TCP/IP Configuration Introduction This section contains instructions for configuring the TCP/IP protocol for both Windows and Macintosh operating systems.
13 TCP/IP Configuration, continued 13. When the system finishes copying the files, click OK. 14. Close all networking windows. 15. When the System Settings Change dialog box appears, click YES to restart your computer. Configuring the TCP/IP Protocol for Windows 2000 Follow these steps to install and configure the TCP/IP protocol for Windows 2000.
14 TCP/IP Configuration, continued 2. Click Edit on the Finder (gray bar) at the top of the screen. Scroll down to the bottom of the menu, and then click User Mode .
15 USB Driver Installation Installing the USB Drivers for Windows 98/ME If your PC has a USB interface, follow these steps to install the provided USB drivers. If your PC does not have a USB interface, you may skip this procedure. 1. Insert the USB Cable Modem Driver Installation disk into the floppy disk A drive of your PC.
16 UseUS U s s USB Driver Installation , continued Installing the USB Driver for Windows 2000 Follow these steps to install the USB driver on a Windows 2000 system. 1. Wait until the Power and Status indicators on the cable modem illuminate solid green, then plug the USB cable into the USB port on your PC.
17 Uninstalling the USB Drivers for Windows 2000 Follow this procedure to uninstall the USB drivers on a Windows 2000 system. 1. Click Start , select Settings , and choose Control Panel . The Control Panel window appears. 2. In the Control Panel window, double-click the Add/Remove Hardware icon.
18 Uninstalling the USB Drivers for Windows 2000, continued 6. In the Add/Remove Hardware Wizard window, click USB Cable Modem Adapter , and then click Next . 7. In the Add/Remove Hardware Wizard window, click Yes, I want to uninstall this device , and then click Next .
19 Renewing the IP Address for Windows 2000 Follow these steps to renew the IP address on your PC if you are using Windows 2000. 1. Click Start , and then click Run to open the Run window. 2. Type cmd in the Open field, and click OK to execute the cmd command.
20 T roubleshooting Frequently Asked Questions Q. What if I don’t subscribe to cable TV? A. If cable TV is available in your area, data service may be made available with or without subscribing to cable TV service. Contact your local cable service provider for complete information on cable services, including high-speed Internet access.
21 T roubleshooting , continued Common T roubleshooting Issues The modem does not register an Ethernet connection. Even new PCs do not always have Ethernet capabilities. Be sure to verify that your computer has a 10/100BaseT Ethernet card and that the Ethernet driver software is properly installed.
22 Tips for Improved Performance Check and Correct If your cable modem does not perform as expected, the following tips may help. If you need further assistance, contact your cable service provider. • Verify that the plug to your cable modem AC adapter is properly inserted into an electrical outlet.
23 T rademarks Scientific-Atlanta and the Scientific-Atlanta ARCs logo, are registered trademarks of Scientific-Atlanta, Inc. W ebST AR and “Bringing the Interactive Experience Home” are trademarks of Scientific-Atlanta, Inc. Other trademarks listed her ein are the pr operty of their r espective owners.
24 USB Driver Uninstallation , continued United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway , Box 465447, Lawrenceville, GA 30042; T el: 770-903-5000; TWX: 810-799-4912; T elex: 0542898 E.
An important point after buying a device Scientific Atlanta DPX130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scientific Atlanta DPX130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scientific Atlanta DPX130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scientific Atlanta DPX130 you will learn all the available features of the product, as well as information on its operation. The information that you get Scientific Atlanta DPX130 will certainly help you make a decision on the purchase.
If you already are a holder of Scientific Atlanta DPX130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scientific Atlanta DPX130.
However, one of the most important roles played by the user manual is to help in solving problems with Scientific Atlanta DPX130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scientific Atlanta DPX130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
