Instruction/ maintenance manual of the product SEM-1562A Schumacher
Go to page of 20
Models SE-1562A, SEM-1562A Automatic Battery Charger INSTRUCTION MANUAL 00-99-000254/0408 V oltage : 6, 1 2 Ampe rage: 1 .5 READ ENTIRE MANUAL BEFORE USING THIS PRODUCT.
.
• 1 • IM PO RT ANT SA FET Y INS TRUCT IO NS 1. SA VE THESE INSTRUCTIONS – This manual contains important safety 1.1 and operating instructions for battery charger Models SE-1562A and SEM- 1562A. Do not expose charger to rain or snow . 1.2 Use of an attachment not recommended or sold by the battery charger 1.
• 2 • PERSO NA L PRECAUTIO NS 2. Consider having someone close enough by to come to your aid when you 2.1 work near a lead-acid battery . Have plenty of fresh water and soap nearby in case battery acid contacts 2.2 skin, clothing, or eyes. Wear complete eye protection and clothing protection.
• 3 • CHA RGE R LOCA T IO N 4. Locate charger as far away from battery as DC cables permit. 4.1 Never place charger directly above battery being charged; gases from bat- 4.2 tery will corrode and damage charger . Never allow battery acid to drip on charger when reading electrolyte spe- 4.
• 4 • When disconnecting charger , turn switches to off, disconnect AC cord, 6.7 remove clip from vehicle chassis, and then remove clip from battery termi - nal. See OPERA TING INSTRUCTIONS for length of charge information. 6.8 FOLLOW THES E STE PS WH EN BA T TE RY IS OU TSI D E VE HI CLE .
• 5 • BA T TERY CHA RGI NG - AC CONN ECTI O NS 8. This battery charger is for use on a circuit having a nominal rating more 8.1 than 120 volts (or ″This appliance is rated more than 15 amperes a.
• 6 • Attach the black ring terminal (-) to the negative terminal of the battery . • Plug the ring terminal’s connector into the connector attached to the • 1562A Follow charging instructions as outlined in section 10. • OPER A TI NG IN STRUC TI ON S 10.
• 7 • MA IN TEN AN CE IN STRU CTI ON S 1 1. Before performing maintenance, unplug and disconnect battery charger 1 1.1 (see sections 6.7 or 7.6). After use, use a dry cloth to wipe all battery corrosion and other dirt or oil 1 1.2 from terminals, cords, and the charger case.
• 8 • LIM IT ED WAR R A NT Y 1 5. SCHUMACHER ELECTRIC CORPORA TION MAKES THIS LIMITED W ARRANTY TO THE ORIGINAL PURCHASER A T RET AIL OF THIS PRODUCT .
• 9 • MANUAL DEL DUEÑO Modelos SE-1562A, SEM-1562A 00-99-000254/0408 V oltios : 6 , 1 2 Ampe rage: 1 .5 LEA TODO EL MANUAL ANTES DE USAR ESTE PRODUCTO.
• 10 •.
• 1 1 • IMPORT ANTE: LEA Y CONSER VE ESTE MANUAL DE INSTRUCCIONES Y SEGURIDAD. INS TRUCCI O NES D E SEGUR I DAD I MPO RT A NTES 1. CONSERVE EST AS INSTRUCCIONES – Este manual contiene instruc- 1.1 ciones operativas y de seguridad importantes para el cargador de baterías Modelo SC-10030A.
• 12 • P ARA REDUCIR EL RIESGO DE EXPLOSIÓN DE LA BA TERÍA, SIGA EST AS INSTRUCCIONES ADEMÁS DE LAS PUBLICADAS POR EL F ABRICANTE DE CUALqUIER EqUIPO qUE qUIERA USAR CERCA DE LA BA TERÍA. REVISE LAS MARCAS DE PRECAUCIÓN DE ESTOS PRODUCTOS Y DEL MOT OR.
• 13 • Agregue agua destilada en cada celda hasta que el ácido de la batería 3.4 alcance el nivel especicado por el fabricante. Evite que se rebase. En el caso de una batería sin capas de celda desmontables, como las baterías de plomo y ácido reguladas por una válvula, siga atentamente las instruc - ciones de recarga del fabricante.
• 14 • Si el terminal negativo está conectado al chasis (como en la mayoría de los vehículos), véase (6.5). Si el terminal positivo es el que está conecta - do al chasis, véase (6.6). Para un vehículo de conexión a tierra negativa, conecte el sujetador 6.
• 15 • Una batería marítimo (de barco) se debe retirar y cargar en tierra. Su 7.7 carga a bordo requiere un equipo especialmente diseñado para el uso marítimo. CARGA DE B A T ER ÍA – CO NE X I ON ES CA 8. Este cargador de baterías es para uso en un circuito de régimen nomi - 8.
• 16 • INSTRUCCIONES DE OPERACIÓN AL USAR LOS TERMINALES DE 9.2 ARO DE CONEXIÓN RÁPIDA. Las terminales con argolla pueden permanecer montadas en la bat- • ería permanentemente. Si se dejan conectadas permanentemente, asegúrese de que no obstruccionen o rosen partes delicadas del ve - hículo.
• 17 • INS TRUCCI O NES D E MA NTE NI M IE NTO 1 1. Antes de efectuar mantenimiento, desenchufe y desconecte el cargador 1 1.1 de baterías (vea las secciones 6.7 o 7.6). Después del uso, limpie toda corrosión de la batería y otra suciedad o 1 1.
• 18 • GAR AN TÍ A LI MI T A DA 1 5 . Schumacher Electric Corporation hace esta garantia limitada al compra- dor original al por menor de este producto.
An important point after buying a device Schumacher SEM-1562A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schumacher SEM-1562A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schumacher SEM-1562A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schumacher SEM-1562A you will learn all the available features of the product, as well as information on its operation. The information that you get Schumacher SEM-1562A will certainly help you make a decision on the purchase.
If you already are a holder of Schumacher SEM-1562A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schumacher SEM-1562A.
However, one of the most important roles played by the user manual is to help in solving problems with Schumacher SEM-1562A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schumacher SEM-1562A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
