Instruction/ maintenance manual of the product SE-125A Schumacher
Go to page of 8
1 Sch589 OWNER'S MANUAL 589-401 MODEL: SE-125A BA TTER Y CHARGER 1. W ARNING: Wear complete eye protection and clothing protection, when working with lead-acid batteries. 2. Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery .
2 Sch589 PREP ARING TO CHARGE C 1. Make sure you have a 6 or 12 volt lead-acid battery . Check car owner manual to make sure. 2. Clean battery terminals. T ake care to keep corrosion from coming in contact with your eyes. 3. If required, add distilled water in each cell until battery acid reaches levels specified by battery manufacturer .
3 Sch589 METER AND SWITCH FUNCTIONS D 12 VOLT 2 AMP 12 VOLT 15 AMP OFF TYPICAL DISPLAY FOR A FULLY CHARGED BATTERY AT THE 15 AMP CHARGE RATE POWER ON Ä TYPICAL DISPLAY FOR A DISCHARGED BATTERY AT THE.
4 Sch589 1. Position AC power cord and DC charging cords to reduce risk of damage by hood, door , or moving engine parts. 2. Stay clear of fan blades, belts, pulleys, and other parts that can cause injury . 3. Check polarity of battery posts. Battery case will be marked by each post: POSITIVE (POS, P , +) and NEGA TIVE (NEG , N, -).
5 Sch589 TROUBLESHOOTING If a problem does occur , check the following: PROBLEM POSSIBLE CAUSE SOLUTION No meter reading. Clips are not making Rock clips back and a good connection forth for a better connection. AC Cord unplugged. Plug AC line into outlet.
6 Sch589 1. ADVERTENCIA: Al trabajar con baterías de plomo-ácido, use protección completa de los ojos y protección de la ropa. 2. Cuando usted trabaje con o esté cerca de una batería de plomo- ácido, asegúrese que alguien esté al alcance de su voz o suficientemente cerca como para ayudarlo.
7 Sch589 encendido de arranque del motor . 3.Coloque el selector rotativo de régimen de carga en la posición de encendido de 125 amperios que corresponda con el voltaje de la batería del vehículo.
8 Sch589 de mayor diámetro que el negativo. 2. Conecte un cable aislado de acumulador de 61cm (24”) o más, cali- bre 6 (A WG) al terminal NEGA TIVO (NEG , N, -). 3. Conecte la pinza POSITIV A (ROJA) del cargador al terminal POSITIVO (POS, P , +) del acumulador .
An important point after buying a device Schumacher SE-125A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schumacher SE-125A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schumacher SE-125A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schumacher SE-125A you will learn all the available features of the product, as well as information on its operation. The information that you get Schumacher SE-125A will certainly help you make a decision on the purchase.
If you already are a holder of Schumacher SE-125A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schumacher SE-125A.
However, one of the most important roles played by the user manual is to help in solving problems with Schumacher SE-125A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schumacher SE-125A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
