Instruction/ maintenance manual of the product 9275A-PE Schumacher
Go to page of 16
1 1373-401 or electric shock. If an extension cord must be used, make sure that: Pins on plug of extension cord are the same num- ber , size, and shape as those of plug on charger . Extension cord is properly wired and in good elec- trical condition.
2 1373-401 PERSONAL PRECAUTIONS AND SAFETY PREP ARING TO CHARGE 1. W ARNING: Wear complete eye protection and clothing protection when working with lead-acid batteries. 2. Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery .
3 1373-401 BA TTER Y CHARGER CONTROLS This battery charger offers two 12-volt charge rates, 2 and 12 amps. The 2-amp rate is recommended for charging small batteries such as those found in motorcycles and riding lawn mowers whereas the 12-amp rate is for larger automotive and marine batteries.
4 1373-401 This battery charger is equipped with a self-resetting circuit breaker . This device protects the charger from temporary overloads. In the event of an overload, the circuit breaker will trip open and after a short cooling off period will reset automatically .
5 1373-401 FIGURE 1: CONNECT NEGA TIVE BA TTERY CLAMP TO 24-INCH CABLE END B A TTERY POSITIVE NEGA TIVE 24", 6 GUAGE CABLE POWER CORD TO GROUNDED POWER OUTLET +- B A TTERY CHARGER 1 . Check polarity of battery posts. Battery case will be marked by each post: POSITIVE (POS, P , +) and NEGA TIVE (NEG , N, -).
6 1373-401 TROUBLESHOOTING Problem 1. No meter reading 2. LEDs are not glowing 3. V ehicle will not start in Engine S tart 4. Charger is connected correctly but charging is not taking place Solution A. Check to see if the charger is plugged into the AC outlet.
7 1373-401 MAINTENANCE/CLEANING INSTRUCTIONS V ery little maintenance is required for the battery charger . Follow common sense in wiping the charger clean and store in a cle an, dry area. 1 . After use, wipe all battery corrosion and other dirt or oil from clamps, cord, and the charger case.
8 1373-401 • IMPORT ANT SAFETY INSTRUCTIONS • • SA VE THESE INSTRUCTIONS • 801 BUSINESS CENTER DRIVE • MOUNT PROSPECT , ILLINOIS 60056-2179 Send Warranty Product Repairs to: 1025 E.
1 1373-401 • INSTRUCCIONES DE SEGURIDAD IMPORT ANTES • GUARDE EST AS INSTRUCCIONES • Precaución: Lea detenidamente las reglas para operar seguramente EL TRABAJAR CERCA DE BA TERIAS DE PLOMO-ACIDO ES PELIGROSO. LAS BA TERIAS GENERAN GASES EXPLOSIVOS DURANTE LA OPERACION NORMAL DE LA BA TERIA.
2 1373-401 PRECAUCIONES Y SEGURIDAD PERSONALES 1. ADVERTENCIA: Al trabajar con baterías de plomo-ácido, use protección completa de los ojos y protección de la ropa. 2 . Cuando usted trabaje con o esté cerca de una batería de plomo-ácido, asegúrese que alguien esté al alcance de su voz o suficientemente cerca como para ayudarlo.
3 1373-401 CONTROLES DEL CARGADOR DE BA TERIA Esta cargador de batería provee regímenes de carga de 12 voltios: a 2 y 12 amperios. El de 2 amperios se recomienda para cargar baterías pequeñas tale.
4 1373-401 CARGA MANUAL VS. CARGA AUTOMÁTICA En las posiciones AUTOMÁTICAS, el cargador SE ENCIENDE únicamente cuando está conectado a una batería con voltaje mayor de ,7 voltios. En la posición MANUAL, el cargador SE ENCIENDE bajo cualquier condición.
5 1373-401 1 . Inspeccione la polaridad de los postes de la batería. La caja de la batería estará marcada por cada poste: POSITIV A (POS, P , +) y NEGA TIV A (NEG , N, -). NOT A: El poste positivo de la batería generalmente tiene un diámetro mayor que el poste negativo.
6 1373-401 POSTE POSITIVO CONECT ADO A TIERRA 5B. Para un vehículo conectado a tierra por el positivo, conecte la pinza de conexión NEGA TIV A (NEGRA) del cargador de la batería al poste NEGA TIVO (NEG , N, -) no conectado a tierra.
7 1373-401 INSTRUCCIONES DE MANTENIMIENTO Y LIMPIEZA El cargador de batería necesita muy poco mantenimiento. Use sentido común al limpiar el cargador y almacénelo en un sitio limpio y seco. 1 . Después de cada uso, limpie el cargador para quitar toda la corrosión, y otra suciedad o aceite de las grapas, del cordón y de la caja del cargador .
8 1373-401 • INSTRUCCIONES DE SEGURIDAD IMPORT ANTES • • GUARDE EST AS INSTRUCCIONES • Para reparación del producto baja garantía, envíelo a: 1025 E.
An important point after buying a device Schumacher 9275A-PE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schumacher 9275A-PE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schumacher 9275A-PE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schumacher 9275A-PE you will learn all the available features of the product, as well as information on its operation. The information that you get Schumacher 9275A-PE will certainly help you make a decision on the purchase.
If you already are a holder of Schumacher 9275A-PE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schumacher 9275A-PE.
However, one of the most important roles played by the user manual is to help in solving problems with Schumacher 9275A-PE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schumacher 9275A-PE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
