Instruction/ maintenance manual of the product 200-30 Schumacher
Go to page of 8
1 1. Before you use your battery charger , be sure to read all instructions and cautions printed on: • Battery Charger • Battery • V ehicle or unit using battery 2. Use battery charger on LEAD ACID type rechargeable batteries only , such as used in autos, trucks, tractors, airplanes, vans, RV's, trolling, motors, etc.
2 1. W ARNING: Wear complete eye protection and clothing protection, when working with lead-acid batteries. 2. Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery . 3. Have plenty of fresh water and soap nearby for use if battery acid contacts skin, clothing, or eyes.
3 1. Position AC power cord and DC charging cords to reduce risk of damage by hood, door , or moving engine parts. 2. S tay clear of fan blades, belts, pulleys, and other part s that can cause injury . 3. Check polarity of battery posts. Battery case will be marked by each post: POSITIVE (POS, P , +) and NEGA TIVE (NEG , N, -).
4 Y our charger is provided with a five position rotary charge rate selector switch. Select the switch position that meets your charging needs. See description below . Switch Position Used for Of f Power to battery charger transformer and battery is off.
5 CHARGE RA TE*/CHARGING TIME - HOURS** 2 AMP 10 AMP 30 AMP 40 AMP 60 AMP Motorcycle, Garden 6 - 12 AH 3-6 Tractor , etc. 12 - 32 AH 3 - 18 200 - 315 CCA 40 - 60 RC 13 - 20 2 ½ - 4 ½ - 1 ½ - ¾ NR .
6 A. INSTRUCCIONES IMPORTANTES DE SEGURIDAD: 1. GUARDAR EST AS INSTRUCCIONES - Este manual contiene instrucciones importantes para la operación y seguridad del cargador de batería, modelo numero 200-30 & 3010 que debe de ser usado solamente con una batería automotriz de 6 o 12 voltios.
7 7 . Cuando vaya a desconectar el cargador ponga los interruptores en la posición OFF desconecte el cordón de la corriente AC del toma-corriente y después quite los alicates del chasis y de la batería en este mismo orden. 8. Observe las instrucciones de trabajo para información sobre el tiempo de carga.
8 celda está al nivel apropiado. Antes de cargar baterías sin tap aderas en las celdas, siga cuidadosamente las instrucciones para carar del fabricante. 2. Ponga el interruptor de carga a la posición de 10 amperes o 30 amperes, depende de los requisitos del operador .
An important point after buying a device Schumacher 200-30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schumacher 200-30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schumacher 200-30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schumacher 200-30 you will learn all the available features of the product, as well as information on its operation. The information that you get Schumacher 200-30 will certainly help you make a decision on the purchase.
If you already are a holder of Schumacher 200-30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schumacher 200-30.
However, one of the most important roles played by the user manual is to help in solving problems with Schumacher 200-30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schumacher 200-30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
