Instruction/ maintenance manual of the product 1010-2 Schumacher
Go to page of 6
Page 1 A. IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger Models. MODELS: #2, CM-1, SE-82-6, SE-83, SE-84, SE-86, SE-1010, SE-1010-2, SE-1015, MC-1, WS-63, WS-84, WS-86, WS-212, WS-1010, WS-1015, WS-1020.
Page 2 2. To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary marking on these products and on engine.
Page 3 position and removing AC cord from electric outlet. Never allow clips to touch each other. 2. Attach clips to battery posts and twist or rock back and forth several times to make a good connection. This tends to keep clips from slipping off terminate and helps to reduce risk of sparking.
Page 4 Installed by a qualified electrician. Improper connection can result in a risk of an electric shock. This battery charger is for use on a nominal 117-volt circuit, and has a grounding plug that looks like the plug illustrated In sketch A In Figure 1.
Page 5 L OUTPUT CURRENT SELECTOR SWITCH In addition to the voltage selector switch, some models are equipped with a two position switch, allowing the operator to select the ampere charge rate to a bat.
Page 6 LIMITED WARRANTY SCHUMACHER ELECTRIC CORPORATION 801 BUSINESS CENTER DRIVE, MOUNT PROSPECT, ILLINOIS 60056-2179 MAKES THIS LIMITED WARRANTY TO THE ORIGINAL PURCHASER AT RETAIL OF THIS PRODUCT.
An important point after buying a device Schumacher 1010-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schumacher 1010-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schumacher 1010-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schumacher 1010-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Schumacher 1010-2 will certainly help you make a decision on the purchase.
If you already are a holder of Schumacher 1010-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schumacher 1010-2.
However, one of the most important roles played by the user manual is to help in solving problems with Schumacher 1010-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schumacher 1010-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
