Instruction/ maintenance manual of the product ION7550 Schneider Electric
Go to page of 28
PowerLogic ® ION7550 / ION7650 Energy & Power Quality Meter Installation Guide December 2007.
.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 3 Danger This sym bol indica tes the presenc e of dan gerous vo ltage within and outsid e the product enclosure that may constitute a risk of electric shoc k, seriou s injury or death to persons if prope r precaut ions are not follo wed.
PowerLogic ION7550 / ION7650 Installatio n Guide 4 © 2007 Schneider Electric. All rights reserved. This equipm ent generates, uses, and can radiate radio freque nc y e n e r g y a n d , i f n o t i n s t a lled and used in accordance with the instructio n manual, may cause har mful interference to r adio communications.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 5 PowerLogic ION7550 / ION7650 Models Integrated Display Model Comes with fr ont optical po rt. TRAN (transdu cer) Model The TRAN model h as no display.
P owerL ogic ION7550 / ION7650 Installation Guide 6 © 2007 Schneider Electric. All rights reserved. Before You Begin Before installing the mete r, familiarize yourself with the steps in this guide and read the safety precautions prese nted on the “Installation Considerations” page.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 7 Unit Dimensions Basic Model — Rear View Basic Model — Front View Basic Model — Side View.
P owerL ogic ION7550 / ION7650 Installation Guide 8 © 2007 Schneider Electric. All rights reserved. Step 1: Mount the Meter Environmental Specifications Meter Batter y Considerations The meter’s battery life expectancy de pends on both temperatur e and the amount of time th e meter is without po wer.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 9 Step 3: Wire the Digital I/O and Analog I/O Form C Digital Outputs: Me chanical Relays R1 - R3 For.
P owerL ogic ION7550 / ION7650 Installation Guide 10 © 2007 Schneider Electric. All rights rese rved. Digital Inputs: S1 - S8 Digital Inputs (Meter Ordering Option): DI1 - DI8 T ype Self-e xcited (inter nal 30 VDC supply) Application Dry contact sensing, or with external excitation Wire 1.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 11 Analog Inputs (Meter Orderi ng Option): AI1 to AI4 N OTE Do not connect the analog input s of the I/O card to t he analog outputs on the same I/O card.
P owerL ogic ION7550 / ION7650 Installation Guide 12 © 2007 Schneider Electric. All rights rese rved. Step 4: Wire the Voltage and Current Inputs V oltage Inputs Current Inputs: Class 20 Current Inputs (5A Option) Current Inputs: Class 2 Current Inputs (1A Option) N OTE The appropriate Volts Mode sett ing is included with each wiring diagram.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 13 4-Wire Wye, 3-Element, Direct Connection Diagram 347 V L-N / 600 V L-L max. VOLTS MODE = 4W-Wye 4-Wire Wye, 3-Element, 3 PTs Conn ection Diagram Use PTs for voltages over 347 V L -N / 600 V L-L.
P owerL ogic ION7550 / ION7650 Installation Guide 14 © 2007 Schneider Electric. All rights rese rved. 3-Wire Solid-Grounded Wye, 3- Element, Direct Connection When the common or star point of a 3-wire Wye system is grounded, the meter may be connecte d directly without using PTs, provided that the phase voltages are with in the meter’s range.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 15 3-Wire Delta, 2½-Eleme nt, 2 PTs & 3 CTs Use PTs for voltag es over 600 V L-L VOLTS MODE = Delta Single Phase Connection Diagram 277 V L-N / 554 V L-L max.
P owerL ogic ION7550 / ION7650 Installation Guide 16 © 2007 Schneider Electric. All rights rese rved. Step 5: Wire the Communications RS-232 Connections (COM1) RS-485 Connections (COM1 and COM2) Infr.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 17 Ethernet Connections (if equipped) 10BASE-T / 100BASE-TX 100BASE-FX (Fiber) Ethernet TCP/IP Ser v.
P owerL ogic ION7550 / ION7650 Installation Guide 18 © 2007 Schneider Electric. All rights rese rved. Step 6: Wire the Power Supply Step 7: Power Up the Meter 1. Ensure t he ground wire is securely conne cted on both e nds. 2. Ensure the meter ’s power supply voltage is within the allowed range.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 19 Password A password is required for all front panel conf iguration changes and to enter the Security Setup menu. The passwor d is set to 0 (zero) in the facto ry.
P owerL ogic ION7550 / ION7650 Installation Guide 20 © 2007 Schneider Electric. All rights rese rved. Front Panel Setup Menu Settings The following table lis ts all settings that can be configured via the front panel.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 21 COM1 SETUP PRO T OCOL The commu nications protoco l ION , Modbu s RTU , Modbus Master , DNP V3 .
P owerL ogic ION7550 / ION7650 Installation Guide 22 © 2007 Schneider Electric. All rights rese rved. NETWORK SETUP IP ADDRESS Sets the IP address for the meter 000.0 00.000.000 t o 999.999.999.9 99 varies 3 SUBNET MASK Used if subnetting appl ies to your network 000.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 23 1 A baud rate of 300 bps is only intended for paging applications. 2 Serial number = PA-03 0 2 B 222 -01, Unit ID = 2222 3 Default IP ADDRESS = 172.
P owerL ogic ION7550 / ION7650 Installation Guide 24 © 2007 Schneider Electric. All rights rese rved. The LEDs on the front panel indicate t he following: Phasor Diagrams You can also view the meter’s phasor diagram in real time. Use t he Phasor Viewer av ailable i n PowerLogic ION Setup v2.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 25 WYE - ABC Rotation Applicable Volts Mode = 4W-WYE and 3W -WYE WYE - ACB Rotation Applicable Volts.
P owerL ogic ION7550 / ION7650 Installation Guide 26 © 2007 Schneider Electric. All rights rese rved. 2 Element (3Wire) DELT A - ABC Rotation Applicable Volts Mode = D ELTA 2 Element (3Wire) DELT A -.
PowerLogic ION7550 / ION7 650 Installation Guide © 2007 Schne ider Electr ic. All rights reserved. 27 Step 10: View Meter Data Use the so ftkeys to sel ect which data to dis play. Use the left and right ar row buttons to scroll throug h th e available display screens.
PowerLogic ION7550 / ION7650 with W ebMeter and MeterM@il Instal lation Guide For fur ther assistance please contact us at: Schneider Electric P ower Monitoring and Control 2195 Keati ng Cross Road Sa.
An important point after buying a device Schneider Electric ION7550 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schneider Electric ION7550 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schneider Electric ION7550 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schneider Electric ION7550 you will learn all the available features of the product, as well as information on its operation. The information that you get Schneider Electric ION7550 will certainly help you make a decision on the purchase.
If you already are a holder of Schneider Electric ION7550, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schneider Electric ION7550.
However, one of the most important roles played by the user manual is to help in solving problems with Schneider Electric ION7550. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schneider Electric ION7550 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
