Instruction/ maintenance manual of the product AL 711 Acer
Go to page of 13
1 Table of Contents Preface .............................................................................................................................................. 1 Chapter 1 Installation .......................................................
2 matériel brouilleur du Canada..
3 Important Safety Instructions Please read the followi ng instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non - solvent cleaning solution onto a rag.
4 Connecting the LCD Monitor and Base When you open the box to take the base and put on the desk first. Then connect the LCD Monitor and base please.(See fig.1 - 1 ) Figure 1 - 1 Viewing Angle Adjustment The LCD Monitor is d esigned to allow users to have a comfortable viewing angle.
5 Connecting the AC Power 1. Connect the power cord to the LCD Monitor. (Se e Fig. 1 - 6 ) 2. Connect the power cord to an AC power source. Figure 1 - 6 Connecting the Audio Cable (For AL712/AL716) 1.
6 5 Function Select Buttons Press either left or right control button f or OSD (On Screen Display) menu selection. 6 Adjustment Control Buttons Press the left button to decrease the OSD setting and press the right button to increase the OSD setting.
7 Function Description Icon Function Fu nction Description Brightness 101 scales of brightness are available to choose from (0 to 100 ). Contrast 101 scales of contrast are available to choose from (0 to 100 ). H . Position This function let's you adjust the display's horizontal position V.
8 adjusted from the OSD menu Temperature..
9 Chapter 3 Technical Information Specifications LCD Panel Size 17 " ( 43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 3 37.
10 Sync Input Signal Separate TTL compatible horizontal and vertical synchronization Digital TMDS Polarity Positive and negative Plug & Play Supports VESA DDC1 and DDC2B functions External Connection Power Input (AC input) AC socket Video Cable 1.
11.
12 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution H. Freq. (KHz) V. Freq. (Hz) Pixel Freq. (MHz) H/V Sync. P olarity Mode 640 x 350 31.469 70.087 25.
13 Also, if the signal cable is not co nnected to LCD monitor at all or properly, the monitor screen will display a message “ No Input Signal ”..
An important point after buying a device Acer AL 711 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer AL 711 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer AL 711 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer AL 711 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer AL 711 will certainly help you make a decision on the purchase.
If you already are a holder of Acer AL 711, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer AL 711.
However, one of the most important roles played by the user manual is to help in solving problems with Acer AL 711. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer AL 711 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
