Instruction/ maintenance manual of the product Communication Drivers Schneider Electric
Go to page of 158
35006152 00 Communication Drivers Installation manual eng.
2.
3 Tabl e of Co nte n ts About the Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Part I General infor mation on the i n stallation of drivers . . . . . 9 At a Glance . . . . . . . . . . . . . . . . . . . . . . . .
4 Configur ation of the W indows 200 0XP operati ng system . . . . . . . . . . . . . . . . . . 42 Configur ation of the W indows NT op erating sy stem . . . . . . . . . . . . . . . . . . . . . . 43 Chapt er 5 TSX F PC 10 IS A c a rd . . . . . . . . . .
5 How to adjus t the ISA TPCX 57 card paramet ers . . . . . . . . . . . . . . . . . . . . . . . 108 Chapter 9 PCIWAY driver for TSX PCI 57 ••• processors . . . . . . . . . . . . 111 At a Glance . . . . . . . . . . . . . . . . . . . . . . . . . .
6.
7 About the Book At a Glance Document Sc ope This document deals w ith the in stallatio n of commun ication drivers for Wi ndows 98, Windows 2000/XP an d Windows NT operati ng system s. These drivers are: Uni- Telwa y: on the serial port, wit h a TS X SCP11 4 card .
About the Book 8 Product Related Warn ings Schneider Electric ass um es no res po ns ibi lit y for an y er rors that may appe ar in this documen t. If you h ave any s uggestio ns for im provements or amendm ents or ha ve found errors in this publicat ion, pleas e notify us.
9 I General inform ation on the installation of drivers At a Glance Subject of th is Part This p art describes the inst allation principle of the va rious driv ers usin g the CD ROM.
Gen eral 10.
11 1 General in formation concerning the Drivers At a Glance Subject of th is cha pter This chapter provides ge neral infor mation on the drive rs. What’ s in this Chapter? This cha pter contai ns t.
General information c oncerning the Drivers 12 Install ation At a Glance It is gene rally pos sible to launch t he instal lation of all the dri vers usi ng the sam e procedure . Proced ure The followi ng proced ure descr ibes the i nstallat ion princi ple of a d river u sing the CD ROM.
General information c oncerning the Drivers 13 4 Then click on OK to confirm your choice. Result : the Safet y warning window appears. 5 Click on Yes to go ahead w ith the installation. Result : the installation setup of the chosen driver is run. 6 Click on Next to go ahead with the installation.
General information c oncerning the Drivers 14 The driver s and Unity Pro Precau tions To ensure co rrect operat ion of the drivers u sing the Un ity Pro so ftware range y ou should i nstall or reinstall the drive rs using t he CDROM versi on ≥ V2.0 .
15 II Uni-Telway dri ver s At a Glance Subject of th is Part This p art describes how to ins tall the d rivers as sociate d with Uni -Telway communi cation fo r Windows 9 8, Windows 2000XP and Windows N T operati ng systems .
Uni-Telway drivers 16.
17 2 Seri al port At a Glance Subject of th is Chapter This chap ter desc ribes instal lation of the Uni -Tel way driv er commu nicat ing in s lave mode on t he serial port with a remote d evice. Driver in stallati on consists of two steps: inst allation of files on th e station, configu ration of the driv er.
Serial port 18 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
Serial port 19 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
Serial port 20 Driver co nfiguration screens At a Glance The config uration too l is used to link a driver confi guration pr ofile to a remot e device that commu nicat es wit h the st atio n.
Serial port 21 Uni-Telway parameters The parame ters are pr esented i n the follo wing mann er: The Station ID window is used to na me the rem ote device associa ted with the driver config urat ion. The COM Port windo w is used to sel ect th e commu nic at ion po rt us ed.
Serial port 22 Line paramete rs The param eters are p resented i n the foll owing mann er: This tab i s used t o configu re the param eters lin ked to tra nsmission : Speed : tran smission sp eed of b.
Serial port 23 Advanced parameters The parame ters are pr esented i n the follo wing mann er: This tab i s used to c onfigure th e line type: PC : uses t he driver t o connect to a series 7 PL C terminal port, Uni-Telway : de fault value, uses the driver to com municate i n Uni-Telway , Num PLC : use s the driver t o connec t to NUM PLCs.
Serial port 24 How to configure the driv er At a Glance During driver insta llation, a default profile i s propos ed. This profile c an be modi fied or a new one create d. How to crea te a new profile From the d river conf iguration screen. Step Ac tion 1 Click on the Add.
Serial port 25 How to modify a prof ile From the drive r configu ration sc reen. How to remo ve a prof ile From the drive r configu ration sc reen. How to activate a prof ile From the drive r configu ration sc reen. Step Act ion 1 Select a configuration profile from the l ist.
Serial port 26.
27 3 TSX SCP 11 4 card At a Glance Subject of th is Section Thi s chap ter desc ribes ins talla tion of th e Uni -Telw ay driver c ommu nicat ing in s lave mode via the PCMCIA TSX SCP 114 card wi th a remote de vice.
TSX SCP 114 card 28 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
TSX SC P 114 card 29 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
TSX SCP 114 card 30 Driver co nfiguration screens At a Glance The config uration tool is us ed to conf igure the TSX SCP 114 ca rd Uni-Telw ay driver. Illustra tion The screen d edicated to the Uni-Te.
TSX SC P 114 card 31 Line para mete rs The parameters ar e presente d in the fo llowing m anner: This tab i s used to c onfigure th e paramete rs linke d to transm ission : transmi ssion spee d of bet.
TSX SCP 114 card 32 Configurat ion of the Windows 98 operating system At a Glance After the driver inst allatio n and configu ration phase, th e operatin g system s hall recogniz e the TSX SCP 11 4 card and its driv er.
TSX SC P 114 card 33 Configurati on of the Windows 2000 XP operating system At a Gla nce After the driver installa tion and c onfigur ation pha se, the op erating sy stem shal l recogniz e the TSX SCP 11 4 card and its drive r.
TSX SCP 114 card 34 Configurat ion of Win NT operating system At a Glance After the driver inst allatio n and configu ration phase, th e operatin g system s hall recogniz e the TSX SCP 11 4 card and its driv er.
35 III FIP dr i vers At a Glance Subject of th is Part This p art descri bes how to install the dr ivers as sociated with FIP commun ication f or Windows 98 , Window s 2000XP and Windows N T operatin g systems .
FIP drivers 36.
37 4 TSX FPP 20 card At a Glance Subject of th is Chapter This chapt er describes insta llation of the driver used to communi cate in Fipway Fipio mode via the TSX FPP K20 0 connectio n kit with a remote d evice.
TSX FP P 2 0 c ar d 38 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
TSX FP P 20 ca rd 39 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
TSX FP P 2 0 c ar d 40 How to install the dri ver At a Glance The config uration tool is used to configu re the drive r in Fipway or F ipio mode to use the TSX FPP 20 card.
TSX FP P 20 ca rd 41 Configurati on of the Windows 98 op erat ing system At a Gla nce After the driver installa tion and c onfigur ation pha se, the op erating sy stem shal l recogniz e the TSX FPP 2 0 card and its driver.
TSX FP P 2 0 c ar d 42 Configurat ion of the Windows 2000XP operating system At a Glance After the driver inst allatio n and configu ration phase, th e operatin g system s hall recogniz e the TSX FPP 2 0 card and its driver.
TSX FP P 20 ca rd 43 Configurati on of the Windows NT operati ng system At a Gla nce After the driver installa tion and c onfigur ation pha se, the op erating sy stem shal l recogniz e the TSX FPP 2 0 card and its driver.
TSX FP P 2 0 c ar d 44.
45 5 TSX FPC 10 ISA card At a Glance Subject of th is Chapter This cha pter descr ibes ins tallation of the driv er communi cating in Fipway/Fip io mode via the ISA TSX FPC 1 0 card and a r emote device.
TSX FPC 1 0 ISA ca rd 46 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
TSX FPC 10 ISA card 47 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
TSX FPC 1 0 ISA ca rd 48 Driver confi guration screen for Windows NT At a Glance The config uration tool is used to configu re the drive r in Fipway or F ipio mode to use a ISA TSX FPC 10 card.
TSX FPC 10 ISA card 49 Advanced configuratio n To access t he advan ced confi guration s creen use th e commands "File->Ad vanc ed Configu r ation " . The follow ing wind ow is di splayed: The follow ing table d escribes the different areas and button s in the wi ndow.
TSX FPC 1 0 ISA ca rd 50 Driver confi guration screen for Windows 98200 0XP At a Glance The config uration tool is used to configu re the drive r in Fipway or F ipio mode to use a ISA TSX FPC 10 card.
TSX FPC 10 ISA card 51 Configurati on of the oper ating system using the TSX FPC 10 card At a Gla nce After the driver installa tion and c onfigur ation pha se, the op erating sy stem shal l recogniz e the ISA TSX FPC 1 0 card and it s driver.
TSX FPC 1 0 ISA ca rd 52 How to select the hardware type for Windows 98 Proced ure After havin g installe d and conf igured t he driver, c arry out the following p rocedu re to select th e hardware type . Step Ac tion 1 In the initial window whi ch is displayed, click on Next .
TSX FPC 10 ISA card 53 2A n s w e r No to the question Do you wan t Windows to search for your new hardware? Result The following window appear s: 3 Select FPC10 Device from the list t hen click on Next . 4 Select FPC10 WDM Device from the list t hen click on Next .
TSX FPC 1 0 ISA ca rd 54 5 Click on Next . 6A n s w e r No t o the question Do you want to restart your computer now? Result The following window appears and t he card is shown in the station’s hardware configuration.
TSX FPC 10 ISA card 55 How to select the hardware type for Windows 2000XP Procedure After hav ing insta lled and c onfigured th e driver, c arry out the f ollowing pro cedure to select th e hardware type . Step Act ion 1 In the initial window which is displayed, click on Next .
TSX FPC 1 0 ISA ca rd 56 2 Select the option Add/ Tr ou bleshoot a peri pheral t hen click Next . Result The following window appears: 3 Select the option Add a new peri pheral then click Next .
TSX FPC 10 ISA card 57 5 Click on Next . Result The following window appear s: 6 Select FPC10 Device from the list t hen click on Next . 7 Select FPC10 WDM Device from the list t hen click on Next . Result : an information window appears. 8 A window infor ms the user that th e hardware parameters of the card m ust be entered by the user.
TSX FPC 1 0 ISA ca rd 58 How to configure hardware parameters for Windows 98 Proced ure When you want to modify the hardwar e parameters, carry out the foll owing procedure . Step Ac tion 1 Click on Properti es . Result The following window appears: 2 Uncheck the box Use automatic settings .
TSX FPC 10 ISA card 59 4 Click on Change setti ngs . Result The following window appear s: 5 From the Val ue list, select the non-conflicting address range. Not e: note the values because they m ust be coded ont o the ISA card. 6 Confirm with OK . 7 Carry out steps 5 to 8 selecting Interr upt Reque st from the list.
TSX FPC 1 0 ISA ca rd 60 How to configure hardware parameters for Windows 2000XP Proced ure After havin g select ed the hard ware type, c arry out th e followin g procedur e to configure the param eters. Step Ac tion 1 Click on the Resources button. 2 Click on Manual Configuration .
TSX FPC 10 ISA card 61 5 Click on Change setti ngs . Result The following window appear s: 6 From the Val ue list, select the non-conflicting address range. Not e: note the values because they m ust be coded ont o the ISA card. 7 Confirm with OK . Result: a confirmation window appears.
TSX FPC 1 0 ISA ca rd 62 10 Accept the configuration with OK . Result The following window appears: 11 Click on Fin ish to confirm hardware configuration.
TSX FPC 10 ISA card 63 How to adjust the ISA TSX FPC 10 card parameters At a Gla nce Before install ing the TSX FPC 10 card, y ou must adj ust the fo llowing pa rameters: the stan dard I/O addre ss, the IRQ i nterrupt address.
TSX FPC 1 0 ISA ca rd 64 Proced ure To adjust the param eters, proc eed in th e following manner: Example of IRQ selection The interrupt a ddress provi ded by the s ystem is 1 0: Example of stan dard .
65 IV ETHWAY driver At a Glance Subject of th is Part This p art describes how to ins tall the d rivers asso ciated w ith ETHWAY communi cation fo r Window s 2000XP and W indows NT operatin g system s.
ETHWAY driver 66.
67 6 Installation At a Glance Subject of th is Chapter This driv er is use d to commun icate vi a an Etherne t card using the ETHWAY protocol. Driver in stallati on consi sts of two mai n steps: inst allation of files on th e station, configu ration of the driv er.
Insta llati on 68 How to install the dri ver for Windows 2000XP At a Glance The ETHWAY protocol is i nstalled fro m: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
Install ation 69 How to instal l the driver The ETHWAY driv er is instal led in ac cordance with the fo llowing pro cedure: Step Act ion 1 Insert the CD-ROM or the first disk. 2 Acce ss the Cont rol P ane l in Windows. 3 Double-click on the Network connections and Remote access icon.
Insta llati on 70 6 In the Select Ne twork Component Typ e window, select the t ype Protocol then click on Add . Result The following window appears: 7 Click on Have Disk . 8 Select the acces s path of the files to be installed from the CD -ROM or the disk using the Browse button.
Install ation 71 How to install the dri ver fo r Windows NT At a Gla nce Th e ETHW AY pro tocol is inst alle d f rom: from the drivers’ CD-ROM, or from di sks if the sta tion ha s no CD-RO M drive.
Insta llati on 72 How to in stall the driver The ETHWAY driver is instal led in ac cordance w ith the fo llowing pro cedure: Step Ac tion 1 Insert the CD-ROM or the first disk. 2 Access the Contr ol P anel in Windows. 3 Launch the Networks icon. 4 Select the Pr otocol s tab and click on Add .
Install ation 73 Driver conf iguration tool At a Gla nce The configura tion to ol is used t o configure th e Ethernet c ard to co mmunicate accordin g to the ETHWAY protocol.
Insta llati on 74 Descrip tion This tabl e describ es the differe nt areas w hich mak e up the c onfigurati on screen : Number Element 1 This field is used to select the Ethernet card (useful if there are several Ethernet cards). This field ca nnot be modified under Windows 2000XP.
75 V XIP dri ver on TCP/IP At a Glance Subject of th is Part This part desc ribes h ow to ins tall t he driver s asso ciated wi th X-Way c ommuni cation on TCP/IP for Windo ws 98, Windows 2000XP and Wind ows NT operating syst ems.
XIP driver on TCP/IP 76.
77 7 Installation At a Glance Subject of th is Chapter This drive r is us ed to c ommuni cate via a n E ther n et car d usin g the X - Way pr otoc ol on TCP/IP. This cha pter descr ibes driv er installati on, which consists of two ste ps: inst allation of files on th e station, configu ration of the driv er.
Insta llati on 78 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
Install ation 79 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
Insta llati on 80 Driver co nfiguration screen At a Glance The config uration too l is used to link a driver confi guration pr ofile to a remot e device that commu nicat es wit h the st atio n.
Install ation 81 Descrip tion This tabl e describes the differe nt areas w hich m ake up the c onfigurati on screen : Number Element 1 All software functions can be accessed using this menu bar: Confi.
Insta llati on 82 How to configure the driv er At a Glance During dri ver installati on, a default confi guration profile is pro posed. You are able to modif y this profil e or cre ate a new o ne.
Install ation 83 Example The architectu re below descri bes the addre ssing of statio ns on Ethernet and Fipway networks : Acces s to stat ions To directly access al l the stations on the Eth ernet 1 ne twork from s tation A , enter the X-Way addre ss {1.
Insta llati on 84 How to remove a connectio n From the c onfigurati on screen , How to modify a connectio n From the c onfigurati on screen , XIP Instanc es Once installe d, config ure the XIP d river an d reboot th e computer. Al l XIP profil e inst ances are initi alize d.
85 VI Drivers f or Atrium Processors At a Glance Subject of th is Part This p art describes how to ins tall the d rivers as sociate d with the TPCX 57 and TSX PCI 57 p rocessors fo r operating systems. These drivers are: the ISAWAY dri ver for the TPCX 57 process ors, the PCIWAY dri ver for the TSX PCI 57 proces sors.
Drivers for A trium Processors 86.
87 8 ISAWAY driver for TPCX 57 processors At a Glance Subject of th is Chapter This driv er makes it possible to use th e TPCX 57 processor on the ISA bus . Driver in stallati on consists of two ste ps: inst allation of files on th e station, configu ration of the opera ting system so that it is recogni zed.
ISAWAY driver 88 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
ISAWAY driver 89 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
ISAWAY driver 90 Configurat ion of the ISAWAY driver for Windows NT Acces s to the configuratio n tool The confi guratio n tool ca n be access ed from th e taskba r "Start->Programs-> Schneider Electric->Driv ers Manage r " .
ISAWAY driver 91 Driver configuratio n Press the Configuration button to d isplay t he foll owing windo w: The table below de scribes the different c ommands i n the tab "Dev ices " : But ton A ctio n Add.
ISAWAY driver 92 Click the tab "Driver" to dis play the following window: This window disp lay s gen eral inform ati on on the driv er PCX57 Configur ation PCX Devices Driv er Manu facture r: Schnei der Autom ation Version: V1.
ISAWAY driver 93 Properties Pres s the Pro perties button to display the follo wing window: The table below de scribes the different a reas: Area Description I/O Base This is the add ress of the P CX5.
ISAWAY driver 94 Click the Datagram t ab to dis play the f ollowing w indow: The table below d escribes the different areas: Area Description Input/ Output buffer A llows the size of the buffers for the interfac e between the PCX57 card and the driver to be configured.
ISAWAY driver 95 Configurati on of ISAWAY driver for Windows 982000XP At a Gla nce The managem ent tool ta b is as f ollows: Elements The Properties b utton is used to acce ss the d river conf iguration screen for card 1 and card 2 respective ly.
ISAWAY driver 96 Configurat ion of the operating system At a Glance After the driver inst allatio n and configu ration phase, th e operatin g system s hall recogniz e the TPCX 57 card an d its driv er.
ISAWAY driver 97 How to select the hardware type for Windows 98 Procedure After hav ing insta lled and c onfigured th e driver, c arry out the f ollowing pro cedure to select th e hardware type . Step Act ion 1 In the initial window which is displayed, click on Next .
ISAWAY driver 98 2A n s w e r No t o the question Do you want Windows to search for your new hardwar e? Result The following window appears: 3 Select PCX57 Device from the list then click on Next . 4 Select PCX57 WDM Device from the list then click on Next .
ISAWAY driver 99 5 Click on Next . 6A n s w e r No to the question Do you wan t to restart you r computer now? Result The following window appears and the card is shown in the station’ s hardware configuration.
ISAWAY driver 100 How to select the hardware type for Windows 2000XP Proced ure After havin g installe d and conf igured t he driver, c arry out the following p rocedu re to select th e hardware type . Step Ac tion 1 In the initial window whi ch is displayed, click on Next .
ISAWAY driver 101 2 Select the option Add/Troublesh oot a peri pheral then click Next . Result The following window appear s: 3 Select the option Add a new peri pheral .
ISAWAY driver 102 5 Click on Next . Result The following window appears: 6 Select PCX57 Device from the list then click on Next . 7 Select PCX57 WDM Device from the list then click on Next . 8 Go to the next procedure: how to configure ha rdware parameters (See How to configure hardware parameters for Windows 2000XP, p.
ISAWAY driver 103 How to configure hardware paramete rs for Windows 98 Procedure When y ou want to modify the hardware pa rameters, carry out t he follow ing procedure. Step Act ion 1 Click on Prop erties . Result The following window appear s: 2 Uncheck t he box Use automatic settings .
ISAWAY driver 104 4 Click on Change Se ttings . Result The following window appears: 5 From the Value li st, select the non-conflicting address range. Note: note the values b ecause they must be coded onto the I SA card. 6 Confirm using the Ok button.
ISAWAY driver 105 How to configure hardware paramete rs for Windows 2000XP Procedure After hav ing sele cted the h ardware type, c arry out th e following procedure to configure the par ameters. Step Act ion 1 Click on the Resources button. 2 Click on Manual Confi guration .
ISAWAY driver 106 5 Click on Change settings . Result The following window appears: 6 From the Value li st, select the non-conflicting address range. Note: note the values b ecause they must be coded onto the I SA card. 7 Confirm with OK . Result: a confirmation window appears.
ISAWAY driver 107 10 Accept the configuration with OK . Result The following window appear s: 11 Click on Finish to confi rm hardware configuration. Step Act ion Add / Re move Ha rdware W izard Cance .
ISAWAY driver 108 How to adjust the ISA TPCX 57 card parameters At a Glance Before ins talling th e TPCX 57 card , you mu st adjust the followi ng parameters : the rack number a nd the proc essor po sition, the stan dard I/O a ddress, the IRQ i nterrupt add ress.
ISAWAY driver 109 Procedure To adju st the parameters, p roceed in the fol lowing ma nner: Example o f stan dard addres s selection The s tanda rd ad dress provi d ed by t he syst em is eq ual to 250 .
ISAWAY driver 110.
111 9 PCIWAY driver for TSX PCI 5 7 ••• processors At a Glance Subject of th is Chapter This driv er makes it possible to use TSX PCI 57 ••• pr ocessors o n the PCI bus Driver in stallati on consists of two ste ps: inst allation of files on th e station, configu ration of the opera ting system so that it is recogni zed.
PCIWAY driver 112 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
PCIWAY driver 113 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
PCIWAY driver 114 Configuri ng the PCIWAY driver for windows 2000XP Acces s to the configuratio n tool The confi guratio n tool ca n be access ed from th e taskba r "Start->Programs-> Schneider Electric->Driv ers Manage r " .
PCIWAY driver 115 Properties Pres s the PCI Properties butt on to disp lay the fo llowing w indow: The table below de scribes the different a reas: Area Description Input/Ou tput Buffer Sizes Al lows the size of the buffers for t he int erface bet ween t he T SX PCI 57 card and the driver to be configured.
PCIWAY driver 116 How to adjust the parameters of the TSX PCI 57 ••• card At a Glance Before ins talling the TSX PCI 57 ••• card , you must: install the PCI 57 d river, code th e rack nu mber on the X Bus, code th e positio n of the pro cessor in th e rack.
PCIWAY driver 117 Procedure To adju st the parameters, p roceed in the fol lowing ma nner: Step Act ion 1 Code the number of the rack on the X-BUS. 2 Code the pos ition of the processor in the rack.
PCIWAY driver 118.
119 VII Modbu s driv er At a Glance Subject of th is Part This p art describes ho w to ins tall the Mod bus driv er for the Wi ndows 98, Windows 2000XP an d Windows NT operating syst ems.
Modbus driver 120.
121 10 Installation At a Glance Subject of th is Chapter This chap ter descri bes Modbus driver in stallatio n. This in stallatio n procedu re can be broken do wn into t wo steps: inst allation of files on th e station, configu ration of the driv er.
Insta llati on 122 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
Install ation 123 How to instal l the driver To i nstall th e driver, carry out the fo llowing pro cedure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
Insta llati on 124 Driver co nfiguration screen At a Glance The confi guration tool is not outs ide the dri ver, but c onstitute s an embed ded graphic interface in the driv er.
Install ation 125 Descrip tion This tabl e describes the differe nt areas w hich m ake up the c onfigurati on screen : Modbus Instan ces Once installe d, conf igure the Modbus d riv er and reboot the compu ter. All Mo dbus instan ces are i nitializ ed.
Insta llati on 126 Driver co ntrol screen At a Glance This sc reen is used to view in formation concerni ng driver o peration. The refresh ment p eriod f or this in formati on is define d in a driver s creen .
Install ation 127 Descrip tion This tabl e describes the differe nt informa tion concern ing drive r operation : Element Description Mode Displays the driver operating mode: RTU Mode, Mode ASCII. Connections Cont ains the number of clients us ing the driver Frames Sent Contains the number of frames sent since the last Reset.
Insta llati on 128 Driver de bug screen At a Glance This sc reen i s used t o deac tivate the s aving o f certa in ope rations carri ed out by th e commun icatio n driver i n a trace f ile.
Install ation 129 Descrip tion This tabl e describes the differe nt areas w hich mak e up the de bug scre en: Area Description Refresh Period Allows t he screen refreshing period for the dr iver control screen to be defined within a range of 0s to 1s.
Insta llati on 130 Informati on screen At a Glance This sc reen provides general i nformatio n on the c ommunicati on driver and on the operating sy ste m ins tal le d.
131 VIII USB d riv er At a Glance Subject of th is Part This part desc ribes how to insta ll the USB driver fo r the Wind ows 2000 XP operatin g systems .
USB driver 132.
133 11 Installation At a Glance Subject of th is Chapter This cha pter descr ibes USB driv er instal lation. Th is insta llation pro cedure can be broken do wn into t wo steps: inst allation of files on th e station, configu ration of the driv er.
Insta llati on 134 How to install the dri ver At a Glance Driver i nstallati on is a stan dard insta llation. It can be l aunched either: from the drivers’ CD-RO M, or from d isks if t he statio n has no C D-ROM dri ve.
Install ation 135 Chec ks When us ing W indows 20 00XP , you must chec k wheth er it is possib l e to in stall unsigned drivers o n the stat ion. To do this , perform th e followin g actions: Step Action 1 Right-click on My Computer and select "Properties" .
Insta llati on 136 How to in stall the driver Befo re starting the ins tallation , check that the USB cable is not connec ted to the PLC . To instal l the driv er, carry out th e follow ing proce dure: Start of installation Installation b y CD-ROM? Insert CD-ROM in CD-ROM drive Insert the 1 st disk in the drive Appear ance of the file INSTALL.
Install ation 137 Configurati on screens for Win 2000XP At a Gla nce After rebooting the PC yo u will hav e to conf igure the USB d river, the USB cable must be conn ected to the PLC, and then Windo ws will detect the PLC and in stall the driver.
Insta llati on 138 3 An icon is displayed in the task bar. Double clicking on it when the USB link with the PLC is operational calls up the window. Clicking on " D river Manager " launches t he tool. Clicking on "OK" m akes an icon appear in the task bar.
Install ation 139 State of the USB li nk At a Gla nce This windo w informs t he user of the state of the dr iver: Description: Field Description Virtual Port Name of the CO M port used by the driver. Line status Contains "I n service" data if the driver is operating, otherwise it contains "N on oper a ti onal " dat a.
Insta llati on 140.
141 IX Drivers manager At a Glance Subject of th is Part This pa rt desc ribes th e Drive rs manage r tool tha t is use d to config ure the di ffer ent drivers in stalled on Windows 98, Windo ws 2000XP an d Window s NT.
Drivers manager 142.
143 12 Functions Management of X- Way drivers At a Gla nce The X-WAY drivers ca n be accessed using the Drivers Mana ger mana gemen t to ol. This is us ed to instal l, update, confi gure and test the diff erent drivers in a centralized manner.
Functions 144 X-Wa y Test t ab This tab i s used t o test the basic operat ion of an X-Way drive r: The table below d escribes the different zones of the window : Driver Group Field Description Name Name of driver to be used for the test (Uni-Telway, FPC10, etc).
Functions 145 Modbus Te st tab This tab i s used to te st the bas ic operat ion of a Modb us driver : The table below de scribes the different z ones of t he window: Com m and bu tton s Object Descrip tion Connect Opens an internal communication channel on the selected driver.
Functions 146 Other tabs The windows co rrespondi ng to these ta bs are des cribed i n the desc ription o f the configura tion for ea ch driver: for the Un i-Telway drive r tab: if using a serial p ort see D river con figuration screens, p. 20 , if using a TSXSCP114 card see D river conf iguration screens, p.
147 Appendices At a Glance Subject of th is Part This p art describes the inst allation and confi guration o f drivers f or the cable TSX PCX 3 030 with win dows 2000 XP.
Appendices 148.
149 A The drivers of the TSX PCX 3030 cable At a Glance Subject of th is Chapter This Ch apter desc ribes the installa tion and con figurat ion of drivers for the ca ble TSX PCX 3030 with win dows 2000 XP.
TSXPCX3030 150 Install ing t he drivers of the TSX PCX 3030 cable At a Glance The TSX PC X 3 030 c abl e is a U SB/RS485 l ink c on ve rter. It ena ble s a d ev ic e t o b e connecte d to a PLC via the USB port usin g its term inal port. The cable is "plu g ’ n’ play".
TSXPCX3030 151 Installatio n The following ta ble describ es the pr ocedure to in stall both drivers required t o use the TSX PCX 3030 ca ble. Step Action 1 Connect the cable to the USB port of your device. Result : Windows detects the new hardware and di splays the ass istant for installing the hardware driver.
TSXPCX3030 152 3 Choose the Automatic driver search option and click on Next . Result : The following window is displayed: 4 Before selecting the CDROM drive option, insert the CDROM Drivers in the CDROM drive.
TSXPCX3030 153 12 Click on Next . Result : a window indicates t hat the installation has bee n successfully completed. 13 Click on Finish . Result : installation of the drivers is completed.
TSXPCX3030 154 Configurat ion screens for drivers using the TSX PCX 3030 cable. At a Glance Once the drivers of the TSX PCX 30 30 cable are ins talled, y ou must sele ct the cab le with the drivers th at can use i t. The com patible drivers are : Uni-Te lway driver, v ersion ≥ V1.
TSXPCX3030 155 Modbus Driv er The follow ing tabl e describes the proce dure for de clarin g the cable w ith a Modb us driver. Step Act ion 1 From the Drivers Manager , select the Mo dbus Serial Driver tab.
TSXPCX3030 156.
C B A 157 D Drive rs Man agement Manage ment of X-Wa y drivers , 143 E Ethway Config uration, 73 Ins t allat ion fo r Win 2000X P, 68 Install ation for Win NT, 71 F FIP with TSXFP C10 card Adjustm ent.
Index 158 T TSX PCX 3030 Config uration scre ens, 154 Inst allation, 150 U Uni-Te lway on Seri al port Config uration scre ens, 20 How to c onfigure the driver, 24 Inst allation, 18 Uni-Telway on TSXS.
An important point after buying a device Schneider Electric Communication Drivers (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Schneider Electric Communication Drivers yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Schneider Electric Communication Drivers - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Schneider Electric Communication Drivers you will learn all the available features of the product, as well as information on its operation. The information that you get Schneider Electric Communication Drivers will certainly help you make a decision on the purchase.
If you already are a holder of Schneider Electric Communication Drivers, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Schneider Electric Communication Drivers.
However, one of the most important roles played by the user manual is to help in solving problems with Schneider Electric Communication Drivers. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Schneider Electric Communication Drivers along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
