Instruction/ maintenance manual of the product MODEL TS Scag Power Equipment
Go to page of 14
MODEL TS THIS MANUAL CONT AINS THE OPERA TING INSTRUCTIONS AND SAFETY INFORMA TION FOR YOUR SCAG ACCESSOR Y . READING THIS MANUAL WILL PROVIDE YOU WITH MAIN- TENANCE AND ADJUSTMENT PROCEDURES T O KEEP YOUR ACCESSOR Y PERFORMING T O MAXIMUM EFFICIENCY .
F AILURE TO FOLLOW SAFE OPERA TING PRACTICES MA Y RESUL T IN SERIOUS INJURY . * Keep all safety shields in place. * Before performing any maintenance or service, stop the machine and remove the spark plug wire. * If a mechanism becomes clogged, stop the engine and wait for all moving parts to come to a complete halt before cleaning.
1 1.1 INTRODUCTION This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this Tiger Striper. Read it carefully and keep it for future reference.
2 FIGURE 2-1 2. Repeat this procedure on the opposite side. The machine is now ready to operate. 2.3 REMOVING THE TIGER STRIPER The Tiger Striper can be easily removed whenever the machine is being transported or when striping is not needed. To remove the Tiger Striper, follow the instructions below.
3 3. Attach the mounting brackets to the cross bar between the wheel motor brackets using (4) u- bolts and (8) serrated flange nuts. See Figure 3-1. Do not tighten the hardware.
4 3. Attach the mounting brackets to the cross bar between the wheel motor brackets using (4) u-bolts and (8) serrated flange nuts. See Figure 3-3. Do not tighten the hardware. -Note- The Tiger Striper cannot be installed on an STC with a serial number below 7630001.
5 FIGURE 4-1 FIGURE 4-2 FIGURE 4-3 LAWN STRIPING GUIDELINES A stripe pattern can add richness and depth to any lawn. Here are some guidelines to help produce various patterns and to enhance your striping techniques. Basic stripe pattern: Begin by mowing the perimeter around the property (Reference Figure 4-1).
6 TIGER STRIPER ASSEMBL Y - STT ST T with a serial number of 7219999 or Below STT-TS Ex p loded View 1 (4x) 1 (4x) 2 3 (4x) 3 (4x) 4 (4x) 4 (4x) 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 14 15 16 16 17 1.
7 R e f . Part No . Number Description 1 04021-09 Nut, Elastic Stop 3/8-16 2 423953 Striper Stop, L.H. 3 04001-19 Bolt, Hex Head 3/8-16 x 1" 4 04100-01 U -Bolt, 5/16-18 x 1" 5 451660 Mounting Bracket Weldment, LH. 6 04041-11 Flatwasher , 3/8-.
8 TIGER STRIPER ASSEMBL Y - STC STC-TS Ex p loded View 1 2 3 6 6 7 7 8 8 9 9 10 10 11 12 12 13 14 16 16 18 19 20 21 23 23 24 26 25 4 (4x) 5 15 17 15 1 6 6 27 28 11 25 25 25 25 25 26.
9 TIGER STRIPER ASSEMBL Y - STC R e f . Part No . Number Description 1 423966 Spacer , Striper Mounting 2 43653 Roller Shaft 3 48100-24 Bushing, .752 Oilite 4 04100-01 U -Bolt, 5/16-18 x 1" 5 451660 Mounting Bracket Weldment, LH. **L.H. Mounting Bracket is used on the Right Side on STC 6 04041-11 Flatwasher , 3/8-.
10 NOTES.
LIMITED W ARRANTY- COMMERCIAL A CCESSOR Y Any part of the Scag commercial accessory manufactured by Scag and found, in the reasonable judgment of Scag, to be defective in material or workmanship, will be repaired or replaced by an Authorized Scag Service Dealer without charge for parts and labor.
P ART NO. 03158 PRINTED 8-2004 PRINTED IN USA © 2004 SCAG POWER EQUIPMENT DIVISION OF MET ALCRAFT OF MA YVILLE, INC WWW .SCAG .COM.
An important point after buying a device Scag Power Equipment MODEL TS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scag Power Equipment MODEL TS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scag Power Equipment MODEL TS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scag Power Equipment MODEL TS you will learn all the available features of the product, as well as information on its operation. The information that you get Scag Power Equipment MODEL TS will certainly help you make a decision on the purchase.
If you already are a holder of Scag Power Equipment MODEL TS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scag Power Equipment MODEL TS.
However, one of the most important roles played by the user manual is to help in solving problems with Scag Power Equipment MODEL TS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scag Power Equipment MODEL TS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
