Instruction/ maintenance manual of the product 4700WD Savin
Go to page of 42
Paper ty pe: Joush itsu 5 5kg , p aper thic kness =80 µ m // Pa ges in boo k=36 / / Print s cale=8 1% Gap (when pr inted at 81% s cale) = Pages in b ook × P aper thic kness = 0 mm 4 7 00W O p erati .
Paper ty pe: Joush itsu 5 5kg , p aper thic kness =80 µ m // Pa ges in boo k=36 / / Print s cale=8 1% Gap (when pr inted at 81% s cale) = Pages in b ook × P aper thic kness = 0 mm Declar ation o f Confor mity “ The Product compl ies with the requirem ents of the EMC Direct ive 89/33 6/EEC and the Low Voltage Direct ive 73 /23/EEC.
Introdu ction This manu al cont ains detail ed ins tructi ons o n the o peration and m ainten ance of this machine. To get maximum v ersatil ity from t his machi ne all operat ors s hould c areful ly re ad and follow the in structi ons i n this manu al.
Introdu ction This manu al cont ains detail ed ins tructi ons o n the o peration and m ainten ance of this machine. To get maximum v ersatil ity from t his machi ne all operat ors s hould c areful ly re ad and follow the in structi ons i n this manu al.
Introdu ction This manu al cont ains detail ed ins tructi ons o n the o peration and m ainten ance of this machine. To get maximum v ersatil ity from t his machi ne all operat ors s hould c areful ly re ad and follow the in structi ons i n this manu al.
Declara tion of C onformit y “ The Pro duct com plies wi th the r equi rements of the E MC Direc tive 89/ 336/ EEC and the Low V oltage Directi ve 73/2 3/EEC. ” In accor dance wit h IEC 604 17, t his mac hine uses the fol lowin g symbol s for the main p ower swi tch: a means POWER O N.
i ENER GY S TAR Progr am ❖ ❖ ❖ ❖ Low Power mod e This product automa tically lowers its po wer consumption 15 minutes after the last copying or pr inting job has been completed. Printing is available in this mode, but if you use the copier, press the { Clea r Modes/E nergy Sav er } key.
ii Specification Recycled paper I n a cc or da n ce wi th t he EN E RG Y ST AR Pr o gr am , we re co m me nd ed u se o f r ec y- cled paper which is environment friendly.
iii How to Read this Manual Symb ols In th is manual, the following sym bols are used: R WARNING: This symbol ind icates a potentially hazardous situation that migh t result in death or serious i njury when you misuse the mac hine without following t he in- struc tion s unde r thi s sy mbol .
iv Terms in this Manual Guide to Option Components In this m anual, the following abbreviati ons are used. • Roll H older Unit T ype A → Roll holder • 2nd Roll T ray Typ e A → Lower tray • S.
v TABLE OF CONTENTS Manu als f or Thi s Mac hine ...... ...... ...... .... ...... ..... .... ...... ...... ...... .... ...... ...... .. 1 What Y ou Can D o wit h Thi s M achine .. .... .... ....... .... .... .... ...... .... .... .... .... ... 2 Copier Functi on .
vi Dolphi nGB-S yst-F _V4_F M.boo k Pag e vi Wednes day, May 2, 2 001 1:19 P M.
1 Manuals f or This Machine This machine has several functions a nd can be used as a copier, print er, or scan- ner. The manu als for the machine are therefore divided into a manual that de- scribes common operat ions and function s, and separat e manuals for the copier , prin ter and sc anner func tions .
2 What You Can Do with This Machine If you instal l the opt ions availabl e for this m achine, you can furth er increase its functionality. If you want to add any of the options, please contact your service representative.
3 Counters This keeps a sepa rate count of the number sheets output by the machine for the variou s functions; Copie r function and Printer function. You can view o r pr int the total s in these counter s. • Total C ounter This is the co mbined t otal fo r the copie r and prin ter co unters .
4 Dolphi nGB-S yst-F _V4_F M.boo k Pag e 4 We dnes day, Ma y 2, 2001 1: 19 P M.
5 1. Combined Function Operations Operation Panel 1. Screen c ontrast knob Adjusts the brightness of the screen. 2. Indicators These indicators show errors or the status of the machine. 3. { User To ols/Counter } key Press this k ey to ch ange the defaul t set- ting s and opera tion cond itions to match your requirements.
Combined Funct ion Operations 6 1 11. { Start } key Press to start copying. The default setting is for the o riginals to be sc anned first, and then copied. You can also u se this key to resume an inte rrup ted copy jo b (Res tart Copy) or re peat a c opy job (R epeat Copy ).
Switching bet ween Functions 7 1 Switch ing between Functions You can use this machine not only as a copier, but optionall y as a printer or scan- ner ma chine as well. Command fr om your comp uter to switc h between func - tion s. Note ❒ Depending on the options you have installed, you may not be abl e to switch to som e func tions.
Combined Funct ion Operations 8 1 Using the Machine a s a Copier Switching to Copier Mode When the printer or scanner fu nction is not using, or finished, the copier sc reen to be displayed normally. Referenc e For details about using the copier functions, see the Copy Reference manual.
Using t he Machine as a Printe r 9 1 Using the Machine a s a Printe r Switc hing t o Prin ter Mode When you send print job fro m your computer , the job will be pr inted. A Print the job as you usually do from your computer. The "Printing..." message is displayed, and printing starts.
Combined Funct ion Operations 10 1 Using the Ma chine as a Sca nner Switching to Scanner Mode A Scan the jo b as y ou usua lly do fr om yo ur compute r. The "Scanning..." message i s displayed. B Place your originals. C Specify the scan settings from y our computer.
Multi-acce ss 11 1 Mult i-access You can switch to , and use, another function, when you ar e using one of the oth- er functi ons (Copier, P rinter, or Sca nner) without interrupting the firs t function. This ability to use differen t function s simultane ously is calle d Multi-ac cess.
Combined Funct ion Operations 12 1 Dolphi nGB-Syst-F _V4_F M.boo k Pag e 12 W ednesd ay, May 2, 20 01 1:1 9 PM.
13 2. User Tools (System Settings) Accessi ng the User Too ls (System Sett ings) This sect ion is for the key o perators in charge of this machine. Y ou can change or set the machin e's default settings .
User Tool s (Sy stem Sett ings) 14 2 A screen is displayed descri bing the setting for item you selected. Referen ce ⇒ p.15 “ User To ols Menu (Sy stem Settings) ” D Change the settings by following the instructions on the s creen, and then pre ss th e [ OK ] key.
User Tool s Menu (System Set t ings ) 15 2 User T ools Menu (S ystem S etti ngs) General Features 1/3 ZEDX170E General Features 2/3 General Features 3/3 Date/Time Key Operator Tools Dol _Chap ter-2 Pa.
User Tool s (Sy stem Sett ings) 16 2 Settings You C an Change with the User Tools For de tails on how to disp lay the sett ings, see p.13 “ Accessi ng the Us er Too ls (System Settings) ” . General Feat ures 1/3 ❖ ❖ ❖ ❖ Fusing Adjustmen t: Paper Tray Speci fies the character istics of the pap er roll in the pape r tray.
Settings You Can Chan ge with the User Tools 17 2 ❒ When Translucent Paper modes 1 or 2 are sele cted, and you change the pa- p e r t y p e f r o m P l a i n o r F i l m t o T r a n s l u c e n t P ap e r , i t m a y t a k e l o n g e r f o r t h e machine to get ready for copying.
User Tool s (Sy stem Sett ings) 18 2 Referen ce See "User Auto R/E Original Size Detec t" in the Copy Reference manual. See "User Auto Reduce/Enlarge" in the Co py Reference manual. ❖ ❖ ❖ ❖ Tray P aper Siz e Speci fies the size of the pap er roll in the pape r tray separa tely.
Settings You Can Chan ge with the User Tools 19 2 Note ❒ Default: • Metric version: • Paper R oll 1: 841mm • Paper R oll 2: 841mm • Paper R oll 3: 594mm • Inch version: • Paper R oll 1: .
User Tool s (Sy stem Sett ings) 20 2 ❖ ❖ ❖ ❖ Orig inal Ou tput Tray Specifies the ori ginal output to use when the pow er is turned on, or the { Clear Modes/Energy S aver } key is pressed.
Settings You Can Chan ge with the User Tools 21 2 General Feat ures 2/3 ❖ ❖ ❖ ❖ Original Feed Delay 1 Specif ies the le ngth o f the d elay befo re an o riginal is fed into the mac hine afte r it has been set. If the originals are frequent ly fed at a slant, or you are usi ng specia l origin als, set the delay to an ap propriate setting.
User Tool s (Sy stem Sett ings) 22 2 ❖ ❖ ❖ ❖ Fine Magn ification: Copier Dependin g on the type of paper, and on the ef fect s of humid or hot condi- t i o n s , t h e c o p y p a p e r c a n e x p a n d o r s h r i n k s l i g h t l y .
Settings You Can Chan ge with the User Tools 23 2 ❖ ❖ ❖ ❖ Auto Paper Ro ll Switching The ma chine c an aut omatica lly swi tch to a nothe r paper tray w ith the same paper si ze and pa per type, if availa ble, whe n the pap er from one pap e r tray runs out during copying.
User Tool s (Sy stem Sett ings) 24 2 General Feat ures 3/3 ❖ ❖ ❖ ❖ Panel To ne Specifies whether or not the machine shou ld emit a tone whe n the keys on the panel are pressed.
Settings You Can Chan ge with the User Tools 25 2 ❖ ❖ ❖ ❖ Panel O f f Ti mer After copying, or no other key ope rations, have been performed the machine switches to standby mo de after a specified period . • 0, 10 – 999 sec. • 60 sec. Note ❒ Default: 60 se conds ❒ The time can be set to 0 and from 10 to 999 seconds.
User Tool s (Sy stem Sett ings) 26 2 Key Operator Tools If the access c ode function has been set , you cannot access th e key operator func- tion unless you enter the access code (up to 8 digits). ❖ ❖ ❖ ❖ Key Operator Access The encr ypted code used to access the management settings is called the ac- cess code.
Settings You Can Chan ge with the User Tools 27 2 ❖ ❖ ❖ ❖ Optional Hard Di sk When the opti onal har d disk is not ins talled , this sho uld be le ft set to not in - stalled. When th e optio nal har d disk i s instal led, if the hard di sk shou ld fail , you c an still use t he mach ine temporar ily if you t urn the hard d isk off.
28 INDEX A Acce ssing the User Too ls (System Setting s) , 13 Auto Off Timer , 26 Auto Pape r Roll S witching , 23 B Bypas s Tray Pa per Type , 17 C Clea r Mode s/ Ene rgy S aver , 5 Clear/S top , 5 C.
29 S Sample Cop y /Parti al Copy key , 5 Scanner Stop , 6 Screen , 5 Screen contrast kn ob , 5 Set Key C ard , 26 Settings You Can Change with the Us er Tools , 16 Start key , 6 Switchin g betw een Fu.
30 EE GB B010 MEMO Dolphi nGB-Syst-F _V4_F M.boo k Pag e 30 W ednesd ay, May 2, 20 01 1:1 9 PM.
An important point after buying a device Savin 4700WD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Savin 4700WD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Savin 4700WD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Savin 4700WD you will learn all the available features of the product, as well as information on its operation. The information that you get Savin 4700WD will certainly help you make a decision on the purchase.
If you already are a holder of Savin 4700WD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Savin 4700WD.
However, one of the most important roles played by the user manual is to help in solving problems with Savin 4700WD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Savin 4700WD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
