Instruction/ maintenance manual of the product WTC500AL Sanyo
Go to page of 89
*Projection lens is optional. Multimedia Pr oject or MODEL PLC-WTC50 0AL Owner ’ s Manual.
2 ◆ Functionally Ric h This projector has man y useful functions such as lens shif ting , ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. ◆ A ut o Lamp Selection Syst em The projector is equipped with 2 projection lamps and automatically switc hes the activ e lamp between 2 lamps.
3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Featur es and De sign ............... 2 T abl e of Conte nt s .................. 3 T o the O wner ........
4 CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS V OL T A GE CONSTI TU TING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT .
5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instr uctions given here and retain them for later use. Unplug this projector from A C po wer supply before cleaning. Do not use liquid or aerosol cleaners.
6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken.
7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal plane.
8 Use the hand grip when moving the projector . Replace the lens cap and retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying. When the projector is not in use for an e xtended period, put it into a suitable case to protect the projector .
9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug. Should the fuse need to be replaced, an A ST A approved BS 1 362 fuse must be used of the same rating, marked thus A S A .
10 !1 Infrar ed Remote Receiv er (Bac k) !2 Lamp Cover !3 Filter Cov er !4 Exhaust V ent !5 Security Chain Hook !6 Air Intake V ent !7 Hand Grip Bottom Back q Lens Release Butt on w Infrar ed.
11 Side T erminal q w e r t i u y AUDIO 2 J ACK Connect the audio output (stereo) signal from a computer or video equipment connected to i to this jac k (p.22). t AUDIO 1 J ACK Connect the audio output (stereo) signal from a computer or video equipment connected to q or w to this jac k (p.
12 !1 R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). Side T erminal !3 CONTROL PORT CONNECT OR When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable.
13 q w e t u i o q W ARNING TEMP . indicator – Lights red light when the projector detects an abnormal condition or the filter cartridge is not installed. – Blinks red when the internal temperature of the projector ex ceeds the operating range (pp.
14 q ST AND-B Y button T urn the projector of f (p.25). t ON button T urn the projector on (p.24). y INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.34– 35). u AUT O PC butt on Automatically adjusts the computer image to its optimum set ting (pp.
15 Remote Control !9 !5 !3 !4 !8 !6 !7 @0 !3 MENU button Open or close the On-Screen Menu (p.26). !6 ZOOM butt on Select the Zoom function (p.30). !5 D.ZOOM but t on Select the Digital zoom +/- mode and resize the image (pp.30,47). !4 P -TIMER but t on Operate the P -timer function (p.
16 T o ensure saf e operation, please obser ve the f ollowing precautions : l Use t wo (2) AAA or LR03 t ype alkaline bat teries. l Alwa ys replace bat teries in sets. l Do not use a new bat ter y with a used bat ter y . l A void contact with water or liquid.
17 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time.
18 Installation Projection angle can be adjusted up to 3.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rot ate the both f eet cloc kwise. T o low er the projector or to retract the adjustable feet, rotate the both f eet countercloc kwise.
19 When replacing the lens or using an optional lens, install the lens by follo wing the instructions below . A sk the sales dealer for detailed information of the optional lens specifications. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector .
20 Connecting to a Computer (Digital and Analog RGB) Cables used for connection )( * =Cables are not supplied with this projector .) • V GA Cable (Mini D-sub 1 5 pin) (One cable is supplied)* • HD.
21 Connecting to V ideo Equipment (Video, S-video, Component, HDMI and RGB Scart) Cables used for connection • Video Cable (RCA x 1) • V GA-Scart Cable • S-VIDEO Cable • BNC Cable • HDMI Cable (Cables are not supplied with the projector .
22 Connecting for Audio Signal Cables used for connection • A udio Cable (Mini Plug [stereo] x 2) • A udio Cable (RCA x 2) (Cables are not supplied with the projector .
23 NO TE ON THE POWER CORD A C po wer cord must meet the requirements of the country where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, contact your sales dealer .
24 Basic Oper ation Connect the projector’ s A C pow er cord into an A C outlet. The PO WER indicator lights red. Press the ON/S T AND-B Y but ton on the top control or the ON but ton on the remote control. The PO WER indicator t urns green and the cooling fans start to operate.
25 Press the ON/S T AND-B Y but ton on the top control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton or the ST AND-B Y but ton on the remote control again to turn of f the projector .
26 T op Control Menu bar P oint er (red fr ame ) Menu icon Item data Press the P oint 7 8 but tons to adjust the value. SELECT butt on P oint er (r ed frame ) Press the P oint ed but tons to mov e the pointer . Item How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu Quit Exit this menu.
27 Menu Bar Syst em Select a computer or video system mode (pp.36, 37). Image Adjust Adjust the pict ure image (pp.42–44). – Contrast – Brightness – <Color> – <Tint> – Color temp.
28 The f ollowing lens operation can be made with the Lens but ton on the top control. Press the L ens but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Zoom ➜ F ocus ➜ Lens Shif t ➜ • • • • • Operating with Projector Control Display “L ens shif t” on the screen.
29 1 2 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Sound Menu icon. Press the V OLUME+/– but tons on the top control or on the remote control to adjust the volume. The volume dialog bo x appears on the screen for a f ew seconds.
30 Remote Contr ol Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freez e the pict ure on the screen.
31 Press the P -TIMER but ton on the remote control. The P -Timer display “00:0 0” appears on the screen and the countdown starts (0 0:0 0–59:59). T o stop the countdown, press the P -TIMER but ton. T o cancel the P -Timer function, press the P-TIMER but ton again.
32 Spotlight Pointer Function P ointer ✔ Note: • Y oucanc hoosethesizeofSpotlight(Large/Middle/ Small)andthepat ternofP ointer(Ar row/Finger/Dot) intheSet tingMenu.See “Pointer”onpage55.
33 Mov e the pointer on the screen with this but ton. PRESENT A TION POINTER butt on R-CLICK butt on L -CLICK butt on Act as right (clic k) mouse but ton while the projector and a computer are connected with a USB cable. Act as lef t (clic k) mouse but ton while the projector and a computer are connected with a USB cable.
34 Remote Contr ol INPUT butt ons T op Control Input Press the INPU T 1, INPU T 2, or INPU T 3 but tons on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation INPUT butt on Press the INPU T but ton on the top control.
35 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Input Menu icon. 1 Use the P oint ed but tons to mo v e the red arro w pointer to the desired input and then press the SELECT but ton.
36 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. 1 V ideo System Selection A V Syst em Menu (Video or S.
37 The Auto PC A djustment function operates to adjust the projector . PC Syst em Menu The PC S ystem Menu icon Selected system is displayed. Sy stems in this dialog box can be selected. Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC S ystem Menu icon.
38 A uto PC A djustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Mov e the red frame pointer to A uto PC A dj. and press the SELECT button. “Please wait..
39 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the P oint ed but tons to mo v e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x.
40 Use the P oint 7 8 but tons to adjust the horizontal area display ed b y this projector . Display ar ea H Use the P oint 7 8 but tons to adjust the vertical area display ed b y this projector . Display ar ea V Reset Stor e Exit the PC A djust Menu.
41 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image Menu icon. 1 2 Use the P oint ed but tons to mo v e the red frame pointer to the desired image lev el and then press the SELECT but ton.
42 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mo v e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x.
43 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 1 5).
44 T o store the adjusted dat a, select Store and press the SELECT but ton. Use the P oint ed but tons to select one from Image 1 to 4 and press the SELECT but ton. A confirmation box appears and then select [Y es]. Stored data can be called up by selecting an “Image (1–4)” in the Image Le vel Selection on page 41 .
45 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mo v e the red frame pointer to the desired function and then press the SELECT but ton.
46 Pro vide the image to fit the screen size. Nor mal T r ue Pro vide the image in its original size. When the original image size is larger than the screen siz e (1 280 x 800), the projector enters to the panning mode automatically . Use the P oint ed7 8 but tons to pan the image.
47 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +”appears. P ress the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size.
48 Screen Size Adjustment (V ideo, Component Signals) Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mo v e the red frame pointer to the desired function and then press the SELECT but ton.
49 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, It alian, Spanish, P ort uguese, Dutc h, Sw edish, Russian, Chinese, K orean, and Japanese.
50 Captur e This function enables y ou to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT but ton. A confirmation box appears and select [Y es] to capture the projected image.
51 Enter a Log o PIN code Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Change the Log o PIN code Logo PIN code can be c hanged to y our desired four -digit number . Press the P oint d but ton to select “Logo PIN code c hange ” and then press the SELECT but ton.
52 Pictur e in Pictur e This function is used to project two videos simultaneously by placing a separate small sub screen within the main screen. Use the P oint ed but tons to move the red frame pointer to Pict ure in Picture and then press the SELECT but ton to display a dialog bo x.
53 Set ting This P rojector is equipped with 2 Projection Lamps. This function allows y ou to c hoose how to use the lamp as f ollo ws. Lamp1............ Alw ay s use Lamp 1 . Lamp2 ........... Alwa ys use Lamp 2. Lamp1/2......... Automatically switc h the active lamp from one lamp to the other .
54 Set ting Lamp contr ol This function allo ws y ou to c hange brightness of the screen. Auto 1 ......... The brightness according to the input signal (between Normal and Eco mode). Auto 2 ......... The brightness according to the input signal (between High and Eco mode).
55 Set ting P ointer Y ou can emphasize a part of the projected image with this function. Use the P oint ed but tons to c hoose either Spotlight or P ointer and press the SELECT but ton. Then use the P oint 7 8 but tons to select a size of the Spotlight (Large, Middle, or Small) or a pat tern of the P ointer (Arrow , Finger , or Dot).
56 Set ting Display This function decides whether to displa y On-Screen Displays. On ............................ Sho w all the On-Screen display s. Use this function when y ou want to project images af ter the lamp becomes bright enough. The f actor y default set ting is in this option.
57 Set ting Press the SELECT but ton at P ower management and this dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options. Press the P oint d but ton to select the timer , and then use the P oint 7 8 but tons to set timer .
58 Set ting Shutt er Shut ter function is av ailable to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's top control. Remote control .
59 Ke y loc k Select Ke y loc k. Use the P oint ed but tons to c hoose one of the options and select [Y es] to activate it. Secur ity (Key loc k and PIN code lock set tings) This function allo ws you to use the Ke y loc k and PIN code loc k function to set the securit y for the projector operation.
60 Set ting Change the PIN code loc k setting Use the P oint 7 8 but tons to switc h bet ween the options. Enter a PIN code PIN code lock This function pre vents the projector from being operated by unauthoriz ed persons and provides the follo wing set ting options for security .
61 The PIN code can be c hanged to y our desired four -digit number . Press the P oint d but tons to select “PIN code c hange ” and press the SELECT but ton.
62 F actory def ault This function ret urns all set ting values e xcept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. Exit the Set ting Menu. Quit Select Factory default and this box appears.
63 Maint enance and Car e Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef fectiv eness and ma y result in internal heat buildup and adversely af f ect the life of the projector .
64 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.
65 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton.
66 Auto Lamp Selection System This P rojector is equipped with 2 Projection Lamps. The Lamp Management F unction detects the status of lamps and shows the stat us on screen or on the LAMP 1/2 REPLA CE indicators.
67 When the total lighting time of a Projection Lamp reac hes the recommended tot al hours of use, the Lamp replacement icon appears on the screen and LAMP 1 / 2 REPLA CE indicator lights yello w . Replace the lamp with a new one promptly . The timing when the LAMP 1 / 2 REPLA CE indicator should light is depending on the lamp mode.
68 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp lif e may dif f er from lamp to lamp and according to the environment of use.
69 The W ARNING indicators sho w the state of the function whic h protects the projector . Chec k the state of the W ARNING indicators and the PO WER indicator to take proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP .
70 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens.
71 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. – Make sure y ou hav e properly connected the projector to peripheral equipment as described on pages 20–22. – Make sure all equipment is connected to A C outlet and the pow er is t urned on.
72 – Projecting from the ex cessive slant angle to the screen may cause ke y stone distortion and partial imperf ect focus. Pictur e is not br ight enough. – Chec k if "Contrast" or "Brightness" are adjusted properly See page 42.
73 Appendix This symbol on the nameplate means the product is Listed by Under writers Laboratories Inc. It is designed and manufact ured to meet rigid U.L. saf ety st andards against risk of fire, casualty and electrical hazards. The CE Mark is a Directiv e conformity mark of the European Community (EC).
74 Menu T ree Dynamic Real Cinema* Image 1 Image 2 Image 3 Image Input Go to Syst em (3) Go to Syst em (3) Video Go to Syst em (1) S-video Standard Quit Input 1 Go to Syst em (3) Video Go to Syst em (.
75 Input H-sync freq. V -sync freq. PIN code loc k Infor mation Ke y loc k Screen Language P o wer management Security Remote control Lamp mode Lamp control Lamp 1 Lamp 2 Filter counter Shut ter management Remote control ( ) Min Projector SERIAL NO. Auto PC adj.
76 Appendix Language Setting 1 2 languages provided Blue/User/Blac k A uto 1 /A uto 2/High /Normal/Eco 1/Eco 2 Bac kground Lamp control Quit Capture Logo PIN code c hange Logo PIN code loc k Quit Quit.
77 Indicators and Projector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating normally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • blinking slow (approx.
78 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green / r ed W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . yello w The temperat ure inside the projector is elevated close to the abnormally high lev el.
79 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green / r ed W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . yello w If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig .
80 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 1 40 MHz of Dot Cloc k. Appendix ON-SCREEN DISPLA Y RESOLUTION H-Freq. (kHz) V -Fr eq. (Hz) V GA 1 640x480 31 .
81 When an input signal is digital, refer to the c hart belo w . PC Adjust Menu cannot be selected when Input 1 (HDMI) is selected in the Input Menu. ✔ Notes: • Whentheinputsignal.
82 Appendix List of Picture in Picture o : Picture in Pict ure combinations are enabled - : Pict ure in Picture combinations are disabled ✔ Note: • Whentheinputsignal(s)is/areincompatible,XmarkwillbedisplayedontheMain/Subpicture.
83 T echnical Specifications Mechanical Inf ormation Projector T ype Multi-media Projector Dimensions (W x H x D) 21 .66” x 6.89” x. 1 7 .7 6” (451 .0 mm x 1 75.0 mm x 550.1 mm) Net W eight 32.4 lbs (1 4.7 kg) Feet Adjustment 0˚ to 3.5˚ P anel Resolution LCD Panel Sy stem 0.
84 Model No. Long Zoom Lens : LNS-T1 1 Short Fix ed Lens : LNS-W1 1 Standard Lens : LNS-S1 1 Long Zoom Lens : LNS-T1 0 Short Zoom Lens : LNS-W1 0 PJ-Net Or ganiz er Plus II : PO A-PN03A PJ-Net Or ganiz er Plus IIC : PO A-PN03C V GA -Cable(1 0 m) : KA-MC-DB1 0 Remote Contr ol Cable : PO A-CA-R C30 The parts listed belo w are optionally available.
85 Accessor ies Owner’ s Manual (CD-ROM) Quic k Reference Guide A C Po w er Cord Remote Control and B at teries V GA Cable USB Cable Lens Mount Co ver PIN Code Label Lens Antithef t Screw * * Contact the dealer where you purc hased the projector or the ser vice center about the Lens Antitheft Scre w .
86 T erminal : D-sub 9 pin CONTROL POR T CONNECT OR Vcc - Data + Data Ground 1 2 3 4 2 3 4 1 INPUT 1/ANAL OG OUT T erminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configura.
87 W rite down the PIN code number in the column below and k eep it with this manual securely . If you forgot or lost the number and unable to operate the projector , cont act the ser vice station.
88 Dimensions 3.94 (100.0) 3.94 (100.0) 10.85 (275.5) 3.15 (80.0) 5.55 (141.0) 5.55 (141.0) 6.89 (175.0) 3.70 (94.0) (PANEL CENTER) 3.44 (87.3) 17.76 (451.0) 15.59 (396.0) 21.66 (550.1) 3.5 ° MAX Screw Holes f or Ceiling Mount Screw: M6 Depth: 0.393 (10.
SANY O Electric Co ., Ltd. KV5AM.
An important point after buying a device Sanyo WTC500AL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo WTC500AL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo WTC500AL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo WTC500AL you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo WTC500AL will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo WTC500AL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo WTC500AL.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo WTC500AL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo WTC500AL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
