Instruction/ maintenance manual of the product VCC-4115P Sanyo
Go to page of 16
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS VCC-4115P COLOUR CCD camera CCD-Farbkamera Caméra CCD COULEUR CCD About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
English 1 Depending on the conditions of use, i nstallation and environment, please b e sure to ma ke the appropriate settings and adjustments. If you need help wi th installation and/or settings, please consult your dealer. CONTENTS PRECAUTION S ....
ENGLISH 2 English PRECAUTIONS ■ ■ ■ ■ In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not t o function correctly. D isconnect the power cord im mediately, and consult your dealer (or a Sanyo Autho rized Service Centre).
English 3 PARTS NAMES 1 Shor te r scr ews : M3 x 4 2 Longer screws: M3 x 6 3 Camera mounting screw hole: 1/4"-20 UNC 1 2 3 4 1 Flange-back lock screw (LOCK) 2 Flange-back a djustment dial 3 Lens mount c ap The cap is inst alled to protect the lens m ount section.
4 English PARTS NAMES 9 8 6 7 5 F G H 5 Camera setup sect ion 6 White balance adjustment volume (R or B ) 7 Line phase adjustment volume (PHASE) 8 Lens iri s adjust ment volume 9 Lens iri s output connec tor (LE NS) This 4-pin connector is used to send the DC control si gnal and power supply to an auto-iris type lens.
English 5 MOUNTING THE LENS 1 2 C mount type lens CS mount type lens 2 3 Please use a DC type auto-iris lens (sold separately). 1 Remove the lens mount cap from the camera . 2 Install the auto- iris lens. CS mount type lens Carefully align the lens mount with the camera opening, then turn the lens slowly to i nstall it.
6 English MOUNTING THE LENS 4 3 1 2 1 3 2 ■ ■ ■ ■ Pin layout ■ ■ ■ ■ Flange-back a djustment If the pick-up su rface is not corr ectly positioned with relation to the lens focal point, the picture will be out of f ocus (in particular when using auto-iris power zoom lenses, sold separately).
English 7 CONNECTION S Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.), AC adaptor and cables are sold separately. 1 Make the video signal connec tion between the camera and the monitor or time lapse VCR.
8 English SETTINGS 12 5 6 3 4 7 ■ ■ ■ ■ Camera setup section No. Setting s Posi tion 1 Electro nic Iri s (EI) /Auto i ris (AI ) sett ing AI 2 Aperture compensatio n setting SHRP • SHRP (shar.
English 9 SETTINGS ■ ■ ■ ■ Iris function setting 1 1 1 1 This should normally b e set to the down ( AI ) position. Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the switch 1 to the up ( EI ) position. Note: Please refer to the specifications for dynamic range of t he electronic iris.
10 English SETTINGS ■ ■ ■ ■ Backlight compensation s etting 3 4 3 4 3 4 3 4 This camera has two differen t backlight correction functions: multi-spot photometry ( MULT I ) and center focus photometry ( CENT ).
English 11 SETTINGS ■ ■ ■ ■ White balance adjustment 5 5 5 5 Normally the switch 5 i s set to the down ( ATW : aut o white balance) position and the whit e balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below.
12 English SETTINGS ■ ■ ■ ■ Lens iris adjust ment 7 7 7 7 If using a DC ty pe auto-iris lens, you will need to set the LEVEL volume when shooting in the conditions described below.
English 13 TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not p e rform correctly, please consult your dealer or a Sanyo Authorized Service Centre.
14 English SPECIFICATIONS ■ ■ ■ ■ Camera: SERVI CE This camera is a precision instruments and if treated wi th care, will provide years of satisf actory performance. H owever, in the event of a p roblem, the owner is advised not to attempt to make repairs or open the cabinet.
English 15 SPECIFICATIONS ■ ■ ■ ■ Dimensions Features and sp ecifications are subject to change without prior n otice or obligations. 1.4 108 99 10.
An important point after buying a device Sanyo VCC-4115P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo VCC-4115P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo VCC-4115P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo VCC-4115P you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo VCC-4115P will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo VCC-4115P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo VCC-4115P.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo VCC-4115P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo VCC-4115P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
