Instruction/ maintenance manual of the product STB1220C1 Sanyo
Go to page of 11
INSTRUCTION MANUAL 26" Through The Wall Air Conditioner Cool Only Models Cool/Heat Models Save These Instructions! STB Series Pub. OI-851641 19637001 © SANYO 2000 STB0810C1 STB1010C1 STB1020C1 S.
Contents Page Product Information .............................................................................................. 2 Alert Symbols ........................................................................................................ 2 Installation Location .
Installation Location • We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. • Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate.
Names of Parts Air Intake Air from the room is drawn into this section and passes through air filters which remove dust. Air Outlet Conditioned air is blown out of the air conditioner through the air outlet.
Control Panel and Operation Functions Thermostat Cool Only Model Cool/Heat Model Control The thermostat knob is used to control the room temperature. The unit automatically cycles on and off to maintain room temperature. A comfortable temperature will be maintained in most rooms when the control is set to about intermediate range.
Operation: 1. Set the mode selector for fan, cooling or heating operation. 2. Set the thermostat to the desired position. (Refer to the setting temperature guide above.) 3. 1) Set the operation selector switch. NOTE The above temperatures are provided for reference only , and may differ from the actual temperature of the room.
Other Features V entilation Control The Vent Control is located behind the front grille. When set at CLOSE, only the air inside the room can be circulated and conditioned. When set at OPEN, some indoor air can be exhausted from the room. Fan Switch The Fan Switch is located under the control panel.
Care and Cleaning 8 OI-602-10EG oi602000 Front Grille & Wall Case W ash the front grille and wall case finish with mild soap or detergent and lukewarm water . Control Panel The control panel is shipped with a protective plastic film. This film can be left on or removed.
Ti ps for Energy Saving Do not • Block the air intake and outlet of the unit. If they are obstructed, the unit will not work well, and may be damaged. • Let direct sunlight into the room. Use sunshades, blinds or curtains. If the walls and ceiling of the room are warmed by the sun, it will take longer to cool the room.
T roubleshooting PROBLEM POSSIBLE CAUSE AND REMEDY AIR CONDITIONER DOES NOT OPERA TE • Not plugged in. Plug may have been bumped loose by vacuum cleaner or furniture. • If plugged in, fuse could have blown or circuit breaker may have been tripped.
SANYO FISHER COMP ANY A DIVISION OF SANYO NORTH AMERICA CORPORA TION 21605 Plummer Street Chatsworth, CA 91311 U.S.A. In Canada SANYO Canada Inc. 300 Applewood Crescent, Concord, Ontario L4K 5C7, Cana.
An important point after buying a device Sanyo STB1220C1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo STB1220C1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo STB1220C1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo STB1220C1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo STB1220C1 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo STB1220C1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo STB1220C1.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo STB1220C1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo STB1220C1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
