Instruction/ maintenance manual of the product POA-CH-EX06 Sanyo
Go to page of 12
Installation Manual Setting Plate for Wall Hanging Model PO A-CH-EX06 Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 List of Accessories . . . . . . . . . . . . .
1 ■ Explanation of Symbols The warning marks shown below are used in this manual to prevent personal injury or property dam- age. Make sure you understand these warnings when reading this installation manual.
2 English CAUTION Do not install the setting plate in a location where the operating temperature for your projector model may be exceeded. Such an environment may damage the projector. Install the setting plate in a place free from excessive dust and humidity to prevent the lens or optical components of the projector from becoming dirty.
3 List of Accessories q Wall plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 w Setting plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 e Cover plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 r Adjustment unit .
4 English Installation Procedure Install the wall plate to the wall 1 Determine the position of the wall plate using the template sheet. From the projection distance table (page 10) and dimensions (page 11), confi rm the screen size and the ¡ distance between the projection surface and wall plate.
5 Installation Procedure Attach the setting plate to the wall plate 1 Hang the setting plate hook onto the wall plate slits. 2 Tighten the four M8 x 20 mm hexagon socket head cap bolts supplied with the setting plate. (Secure temporarily so that the adjustment men- tioned on page 7 can be carried out.
6 English Installation Procedure Securing the projector to the setting plate 1 Attach the adjustment unit to the projector using the included 5 screws (M4 x 18). Adjustment unit Projector Screws 2 Remove the two bolts (for drop-prevention) from the setting plate.
7 Installation Procedure Adjustment 1 Adjust the forward/backward slide (Adjustable range: 0 - 180 mm) Loosen the four bolts on the top of the setting ¡ plate using a hexagon wrench (3 mm) and adjust the slider of setting plate. After the adjustment, tighten the four bolts which were loosened.
8 English Installation Procedure 4 Adjust the vertical tilt (Adjustable range: +5° - –5°) Loosen the screw ¡ q located on the left side of the setting plate using the hexagon wrench (3 mm). Turn the adjustment knob ¡ w located on the left top side of the setting plate to adjust the vertical tilt.
9 Attach the drop-prevention wire to the projector To prevent the projector from falling down, use the included drop-prevention wire to connect the projector and the setting plate. 1 Pass the included drop-prevention wire through the drop-prevention wire installation bar of the projector as shown in the illustration.
10 English Projection Distance Table ● SANYO PDG-DWL2500 Unit: inch (cm) Display Size ABCDE H 110" (16 : 10) 21.45" (54.5) 17.91" (45.5) 6.25" (15.9) 12.79" (32.5) 5.78" (14.7) 58.30" (148.1) 100" (16 : 10) 19.
11 Dimensions Unit: inch (mm) 6.45 (164) Center line of the projection surface 18.23 (463) 15.83 (402) 15.16 (385) 15.16 (385) 14.88 (378) 6.85 (174) 6.69 (170) 22.24 (565) max. 13.51 (321) 1.06 (27) POA-CH-EX06(IJAH).indb 11 POA-CH-EX06(IJAH).indb 11 10.
An important point after buying a device Sanyo POA-CH-EX06 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo POA-CH-EX06 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo POA-CH-EX06 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo POA-CH-EX06 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo POA-CH-EX06 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo POA-CH-EX06, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo POA-CH-EX06.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo POA-CH-EX06. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo POA-CH-EX06 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
