Instruction/ maintenance manual of the product PLC-XU46 Sanyo
Go to page of 48
Multimedia Pr ojector MODEL PLC-XU46 Owner’ s Man ual.
2 C AU TI O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus .
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT 22 VIDEO INPUT 29 SETTING 34 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECT.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P AR T OF PROJECT OR BO TT OM BACK CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near these vents.
NO TE ON THE PO WER CORD AC Power Cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING PR OJECT OR ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6 degrees. ADJUSTABLE FEET FEET LOCK LATCHES CA UTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case.
11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector has input and output terminals on its back for connecting computers and video equipment.
12 CONNECTING PR OJECT OR CONNECTING T O COMPUTER R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr S – VIDEO RESET CONTROL PORT USB AUDIO IN COMPUTER R – – L AUDIO OUT (MONO) COMPUTER IN DVI.
13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr RESET CONTROL PORT USB AUDIO IN COMPUTER R – – L AUDIO OUT (MONO) COMPUTER.
14 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE NO SHO W FREEZE A UTO PC ADJ. IMA GE P-TIMER LOCK INPUT KEYST ONE OPERA TION OF REMO TE CONTROL ON ALL OFF ALL-OFF SWITCH Left Side When using the Remote Control, turn this switch to “ ON.
15 BEFORE OPERA TION To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid.
16 ON -- OFF L A M P R E P L A C E W A R N I N G T E M P . R E A D Y L A M P INPUT IMA GE MENU V OLUME – VOLUME + SELECT ZOOM FOCUS BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP.
17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION OPERA TING ON-SCREEN MENU MENU BAR POINTER (red frame) MENU ICON ITEM DATA Press POINT LEFT/RIGHT buttons to adjust value or set function. SELECT BUTTON POINTER (red frame) Press POINT DOWN button to move POINTER.
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / White Balance (R/G/B) / Gamma] (Refer to P27) SETTING MENU Used to change settings of the projector or reset Lamp Replace Counter.
19 B ASIC OPERA TION TURNING ON PR OJECT OR TURNING ON / OFF PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. The LAMP Indicator lights red, and the READY Indicator lights green. Press the POWER ON-OFF button on the Top Control or on the Remote Control to ON.
20 Press the FREEZE button on the Remote Control to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT 1 Press the KEYSTONE button on the Remote Control or select Keystone in the SETTING menu.
21 B ASIC OPERA TION Press the NO SHOW button on the Remote Control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press the P-TIMER button on the Remote Control.
22 COMPUTER INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Computer by pressing the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
23 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the ON-SCREEN MENU will appear.
24 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which may not be turned by Multi-Scan system of this projector.
25 COMPUTER INPUT NOTE : Fine sync, Total dots, Display area (H/V), and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected in the PC SYSTEM Menu (P22). Selects the area displayed by this projector. Select the resolution at the Display area dialog box.
26 COMPUTER INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon.
27 COMPUTER INPUT Press the POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to their previous levels. Reset Store Closes the IMAGE MENU. Quit Other icons operate as follows. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon.
28 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon.
29 VIDEO INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below).
30 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon.
31 VIDEO INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon.
32 VIDEO INPUT Press the POINT LEFT/RIGHT buttons to adjust value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the IMAGE ADJUST Menu icon.
33 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon.
34 SETTING SETTING MENU Ceiling When this function is “ On, ” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “ On, ” the picture is left / right reversed.
35 SETTING This function turns the Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.
36 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow.
37 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter before the Projection Lamp is replaced.
38 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control is not only able to operate this projector but is also usable as a Wireless Mouse for most Personal Computers. The POINT button and two CLICK buttons are used for wireless mouse operation.
39 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover.
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the items below once again. ● Make sure you have connected the projector to peripheral equipment as described properly in the section "CONNECTING PROJECTOR" on pages 11 ~ 13.
41 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center.
42 APPENDIX INDICA T ORS AND PROJECT OR CONDITION Check the Indicators for projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
43 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.
44 APPENDIX TECHNICAL SPECIFICA TIONS 0.9" TFT Active Matrix type, 3 panels Multi-media Projector 9.7 lbs (4.4 kg) 13.11" x 3.52" x 9.96" (333mm x 89.5mm x 253mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.
45 APPENDIX CONFIGURA TIONS OF TERMINALS MONITOR OUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
46 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration CONTROL PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- -.
47.
Printed in Japan Part No. 610 304 4750 (1AA6P1P3765-- MF3A) SANY O Electric Co., Ltd.
An important point after buying a device Sanyo PLC-XU46 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo PLC-XU46 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo PLC-XU46 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo PLC-XU46 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo PLC-XU46 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo PLC-XU46, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo PLC-XU46.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo PLC-XU46. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo PLC-XU46 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
