Instruction/ maintenance manual of the product PLC-XT10A Sanyo
Go to page of 48
Owner’ s Man ual PLC-XT10A Multimedia Pr ojector MODEL PLC-XT15A.
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus .
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT 22 VIDEO INPUT 31 SETTING 36 APPENDIX 38 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECT.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, following precautions should be taken. ● Do not put any flammable object near this vent. ● Keep side grill at least 3 ’ (1m) away from any object, especially heat-sensitive object.
NO TE ON THE PO WER CORD AC Power Cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 4.1 ’ (1.2m) ~ 32.8 ’ (10.0m). ● Refer to figure below to adjust screen size. Screen Size Distance 39 ” 30 ” 4.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case.
S – VIDEO USB COMPUTER IN 2 DVI - I MCI / WI R – AUDIO IN – L (MONO) VIDEO Pb / Cb – Pr / Cr Y – MONITOR OUT COMPUTER IN 1 AUDIO IN 1 AUDIO IN 2 AUDIO OUT RESET CONTROL PORT 11 CONNECTING PR.
12 CONNECTING PR OJECT OR ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 .
13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO USB COMPUTER IN 2 DVI - I MCI / WI R – AUDIO IN – L (MONO) VIDEO Pb / Cb – Pr / Cr Y – MONITOR OUT COMPUTER IN 1 AUDIO IN 1.
14 BEFORE OPERA TION FOCUS BUTTON Used to adjust focus. (P20) AUTO PC ADJ. BUTTON Use to operate AUTO PC Adjustment function. (P25) KEYSTONE BUTTON Used to correct keystone distortion. (P20, 36) IMAGE BUTTON Used to select image level. (P28, 33) LOCK FREEZE SELECT D .
15 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
16 KEYST ONE SELECT ON-OFF BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level.
17 HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast/Brightness /Color Temp. /White Balance (R/G/B) /Gamma] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter.
19 B ASIC OPERA TION TURNING ON PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. 2 3 TURNING OFF PR OJECT OR Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen.
20 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. Zoom Focus ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. The message “ Zoom ” is displayed.
21 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button.
22 COMPUTER INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing COMPUTER 1 or COMPUTER 2 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
23 COMPUTER INPUT SELECTING COMPUTER SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 24). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting.
24 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
25 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear.
26 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector.
27 COMPUTER INPUT Selects area displayed with this projector. Select the resolution at Display area dialog box. Display area Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button.
28 COMPUTER INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button.
29 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon.
30 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
31 VIDEO INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. Press POINT DOWN button to move a red arrow pointer to Video and then press SELECT button.
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear.
33 VIDEO INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button.
34 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button.
35 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon.
SETTING 36 Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “ On, ” picture is left / right reversed.
37 This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life.
38 LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. Turn off the projector and disconnect the AC plug.
39 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
40 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation.
41 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace Lens Cover.
42 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING PROJECTOR" on pages 11 ~ 13.
43 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center.
44 APPENDIX TECHNICAL SPECIFICA TIONS 0.99" TFT Active Matrix type, 3 panels Multi-media Projector 17.2 lbs (7.8 kg) 11.9" x 6.4" x 16.6" (302mm x 162mm x 422mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.
45 CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
46 OPTIONAL P AR TS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● Control Cable (PS2 Port) Type No. : POA-MCPS2 ● Control Cable (ADB Port) Type No. : POA-MCMAC ● MAC Adapter Type No.
47.
Printed in Japan Part No. 610 305 8269 (1AA6P1P3934-- MC3AB) SANY O Electric Co., Ltd.
An important point after buying a device Sanyo PLC-XT10A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo PLC-XT10A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo PLC-XT10A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo PLC-XT10A you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo PLC-XT10A will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo PLC-XT10A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo PLC-XT10A.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo PLC-XT10A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo PLC-XT10A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
