Instruction/ maintenance manual of the product PLC-XF70 Sanyo
Go to page of 84
Multimedia Pr oject or MODEL PLC-XF70 Owner ’ s Manual ✽ Projection lens is optional..
2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology .
3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Contents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . .
4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING TO QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L TAGE C O N S T I T UT IN G A R I S K O F E L E C T R I C SHOCK IS PRESENT WI THIN THIS UNIT .
5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners.
6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken.
7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down w ard, or inclined position in perpendicular direction to the horizontal plane.
8 Mo ving the Pr oject or CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suitable carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuitable transport case.
9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an A S T A approv ed BS 1 362 fuse must be used of the same rating , marked thus AS A .
1 0 u e r t F r ont o q w y i Bac k q Lens Mount Co ver w Pr ojection Lens (Option) e Indicators r Infr ar ed Remote Receiv er (F r ont) !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side.
1 1 T er minals and Connect ors r R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). e USB CONNECT OR (Series B) USB connector is to used to service the projector .
12 i FOCUS but ton A djust the f ocus. (p.27) w ZOOM but ton Zoom in and out the images. (p.27) q ON/ST AND-B Y butt on T urn the projector on or of f . (pp.23,24) o INPUT but ton Select an input source INPU T 1, INPU T 2, Input 3 or Input 4.
13 Indicat ors q w e r t y u e W ARNING TEMP . indicat or T his indicator flashes red when internal projector temperat ure is too high. (pp.65, 72-7 4) u LAMP 1 REPLACE indicat or T urn orange when the life of the projection lamp1 draws to an end. (p.
Remot e Contr ol P art Names and F unctions q t e !0 i !4 r !5 !3 !1 w y u o !7 !2 !8 !6 !9 @0 e LIGHT but t on Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU . (pp.25-26) t POINT ed 7 8 butt ons – Select an item or adjust the value in The ON-SCREEN MENU .
Remot e Contr ol Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size bat ter ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment.
16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . S witc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time.
1 7 Installation Lens Installation Bef ore set ting up the projector , install Projection Lens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, contact sales dealer where you purc hased the projector .
1 8 Pictur e Level and Pitc h Adjustment Installation AD JUST ABLE FEET REAR AD JUST ABLE FEET (R ef er to p.1 0) Projection lens can be mo v ed from side to side and up and do wn with the motor -driven lens shif t function. This function makes the positioning of images easy on the screen.
1 9 T er minals of Pr ojector The projector has two replaceable Interf ace board slots. The projector's functions can be e xtended by installing the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are pro vided in y our purc hasing the projector .
20 Installation Connecting t o Comput er V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p lu g t h e p o we r c or d s o f bo t h t h e projector and e xternal equipment from the A C outlet before connecting cables.
21 Installation Connecting t o V ideo Equipment Video Source (e xample) Video Casset te Recorder Video Disc Pla y er RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as D VD player or high-definition TV source.
22 NOTE ON THE POWER COR D A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug type with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, cont act your sales dealer .
23 T ur ning On the Pr ojector Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control.
24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P o wer of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f .
25 Side Contr ol SELECT butt on Ho w t o Oper at e the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual.
26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image lev el among Standard, Real, and Image 1–1 0(p. 38). Used to adjust the size of the image.
27 Oper ating with Pr oject or Contr ol Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo v ed up or do wn to 50 percent, or sidew a y s up to 1 0 percent from the central axis of the lens shif t.
28 Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to displa y the information windo w on the screen.
29 Oper ating with Remot e Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen.
30 KEY ST ONE but t on Reduce the upper width with P oint e button. Reduce the low er width with P oint d button. Reduce the lef t part with P oint 7 button. Reduce the right part with P oint 8 button. • The white arro ws indicate that there is no correction.
31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but ton on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPUT 4 as y ou press the INPUT but ton.
32 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton.
33 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video.
34 Comput er S yst em Selection This projector automatically t unes to various types of computers based on V G A, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 75-7 6).
35 A ut o PC A djustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon.
36 Manual PC A djustment Some computers employ special signal f ormats whic h may not be t uned b y Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal formats.
37 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select R eset and press the SELECT but ton.
38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
39 ✔ Note: • T rue, F ull screen, and Digit al zoom +/– cannot be selected when no signal is detected in the PC Sy stem Menu. (p.34) • The projector cannot display and resolution higher than 1 60 0 x 1 200. If your computer ’ s screen resolution is higher than 1 60 0 x 1 200, low er the resolution before connecting the projector .
40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size.
41 Comput er Input A V SY STEM MENU (VIDEO OR S-VIDEO) A V SY STEM MENU (COMPONENT VIDEO) V ideo S yst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V S ystem Menu icon.
42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
43 Scr een Siz e Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton.
44 Ke ystone This function is used to store or reset the k e ystone cor rection when the Main On/Of f S witc h is pressed to Of f or the A C pow er cord is unplugged.
45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x.
46 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Off . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position.
47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31).
48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Sw edish, R ussian, Chinese, Korean, or J apanese.
49 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Bef ore capturing an image, select “Standard” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to XG A (1 024 x 7 68).
50 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Off .
51 Lamp control Choose the running speed of cooling f ans from the f ollowing options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an contr ol This function allo ws y ou to c hange the brightness of the screen. Auto . .
52 P o wer manag ement Time lef t bef ore the lamp is of f Press the SELECT but ton at Po wer management and the dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options.
53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons.
54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 80, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST AR TED .
55 Set ting Shutt er Shut ter function is available to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shut ter operation from the remote control.
56 F act ory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu.
57 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and may result in internal heat buildup and adversely af f ect the lif e of the projector .
58 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.
59 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton.
60 Lamp Manag ement This P rojector is equipped with 2 P rojection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators.
61 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Co v er . Slide and open the Lamp Cov er until it mak es a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle.
62 Maint enance and Car e ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing inf ormation to the dealer . ● Model No. of y our pr oject or : PLC-XF70 ● Replacement Lamp T ype No.
63 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use.
64 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet bef ore cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blo w er to clean the lens.
65 Maint enance and Car e The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the state of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP .
66 T roubleshooting Bef ore calling y our dealer or ser vice center for assistance, c hec k the items belo w once again. 1 . Make sure you ha v e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection.
67 appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 55) appears on the scr een – The filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 57 -58) The image is out of f ocus.
68 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center .
69 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq.
70 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj.
71 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu/Quit Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided.
72 Indicat ors and Pr oject or Condition Chec k the indicators for the projector condition. The pr ojector is oper ating normally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx.
73 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el.
7 4 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig.
75 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment can be limited when these modes are selected. Appendix ✽ “T r ue ” cannot be selected when UXG A2, UXGA3, UXG A4 and UXG A5 are selected (p.
7 6 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly view ed. • Specifications are subject to c hange without notice.
77 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 20.87” x 1 0.53” x 29.8” (530 mm x 267 .5 mm x 757 mm) (Not including projections) Net Weight 60.85lbs (27 .6 kg) F eet Adjustment 0˚ to 2.
78 Optional P arts Model No. Wired Remote Cable(30m) : PO A-CA-R C30 Optional Interface Board (DVI) : PO A-MD1 8D VI Optional Interface Board (5-BNC) : PO A-MD1 6VD1 Optional Interface Board (D-sub 15.
79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert.
80 W rite do wn the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the ser vice st ation.
81 Dimensions Unit: inc h (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 ° 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.
82 Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC.
83 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below .
KS3A SANY O Electr ic Co., Ltd..
An important point after buying a device Sanyo PLC-XF70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo PLC-XF70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo PLC-XF70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo PLC-XF70 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo PLC-XF70 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo PLC-XF70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo PLC-XF70.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo PLC-XF70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo PLC-XF70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
