Instruction/ maintenance manual of the product MPR-1014 Sanyo
Go to page of 2
Distributed by: SANYO Electric Co., Ltd. Biomedical Division http://www .sanyo.co.jp/cmg/biomedical ©2008 SANYO Printed in Japan 2008.12 MA SHR130 SANYO Electric Co.
MPR-514R Effective capacity: 486 (17.2 cu. ft.) MPR-1014R Equipped with sliding racks. Effective capacity: 1,029 (36.3 cu. ft.) Worry-free cycle defrosting system With SANYO’ s cycle defrost system, defrosting is performed automatically during compressor “off” cycles, and by sensing frost levels.
An important point after buying a device Sanyo MPR-1014 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo MPR-1014 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo MPR-1014 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo MPR-1014 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo MPR-1014 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo MPR-1014, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo MPR-1014.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo MPR-1014. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo MPR-1014 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
