Instruction/ maintenance manual of the product 16-300310 Avaya
Go to page of 25
Avaya Video Conferencing Solutions Quick Setup Release 6.0 16-300310 Issue 1 August 2010.
© 2010 A vaya Inc. All Right s Reserved. Notice While reasonable ef forts were made to ensure that the information in this document was complete and accurate at the time of print ing, Avaya Inc. can assume no liability for any errors. Chan ges and corrections to the information in this document might be incorporated in fu ture releases.
Canadian Department of Communications (DOC) Interference Information This Class A digital appar atus compl ies with Ca nadian ICE S-003. Cet appareil numéri que de la classe A est conforme à la norme NMB-003 du Canada. This equipment meets th e applicable Industry Canada T erminal Equipment T echnical Specifications.
AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 4 Overview This Quick setup guide covers the basic administration t asks to set up SIP and H.323 video endpoint s. For detailed in formation, see A vaya video confere ncing Solutions Networkin g Guide 6.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 5 ● Perform a network readiness test or network assessment to ensure your network is capable of su pporting bandwidth demand s of video over IP .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 6 3 Enabling video for the SIP signaling gro up 1. On System Manager , click Element s > Feature Management > Network - Signaling Group s.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 7 4 Identifying the IP-codec-set 1. Note the values of the Near-end No de Name and Far-end Network Region fields.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 8 Administration of A vaya Series 1000 Vi deo Conferencing .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 9 T able 3: Creating a template 1 Enabling Call Appearace feature 1.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 10 Adding video users T able 4: Adding video users 1 Creating a New User Profile On System Manager , click Users > Ma nage Users and click on New to open the New User Profile page.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 11 3 Enabling Session Manager Profile Select the check box .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 12 Configuring the A vaya Series 1000 Video Conferencing End point s Perform the following step s to configure all A vaya Series 1000 Video Conferencing Endpoint s using the IR Remote Contro l .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 13 3 Enabling SIP protocol Select Communications , cli ck on SIP , and set the following paramete rs: ● SIP Username : ext.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 14 Configure H.323 video end point s on Communication Manager 6.0 This section provides a set of guidelines to configure video call ing facility on H.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 15 Configuring Polycom End point s Use this procedure to configure the V ideo cal ling facility for all Polycom end point users.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 16 T able 7: Add users/st ations to Polycom end point s 1 Install the Polycom system and connect it to your network.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 17 Configuring Polycom RMX Series V ideo Conferencing Bridge Plat form Use this procedure to configure the Po lycom RM X series video co nferencing Bridge platform.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 18 4 Use the change trunk-group n command (where n is the trunk group you adde d in S tep 2) to add members to the trunk gro up.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 19 Configuring Ad-hoc V ideo Confer encing for a Polycom RMX V i.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 20 4 Use the add video-bridge command to configure a video bridge for the RMX system. Set the following para meters: ● Name to the name for this video b ridge (for example, Ad Hoc video Bridge - RMX).
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 21 7 For the Conference IVR Service, perform the following steps.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 22 Display Cap acity for Ad-hoc video Conferencing. T o display the capacity for Ad-hoc video confe rencing on the Communication Mana ger system: T able 10: Display cap acity for Ad-hoc video conferencing.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 23 Administering Polycom PathNavigator/ CMA Gatekeepers Perform .
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 24 4 Use the add signaling- group command to add a signaling group for the gatekeeper . Set the following p arameters: ● Group T ype: H.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 25 Configuring A vaya one-X ® Communicator Avaya one-X ® Communicator can be configured with eit her SIP or H.323 protocol.
An important point after buying a device Avaya 16-300310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avaya 16-300310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avaya 16-300310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avaya 16-300310 you will learn all the available features of the product, as well as information on its operation. The information that you get Avaya 16-300310 will certainly help you make a decision on the purchase.
If you already are a holder of Avaya 16-300310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avaya 16-300310.
However, one of the most important roles played by the user manual is to help in solving problems with Avaya 16-300310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avaya 16-300310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
