Instruction/ maintenance manual of the product M1060C Sanyo
Go to page of 10
M-1060C M-1110C INSTRUCTION MANUAL Compact Cassette Recorder ENGLISH Printed in China 1AD6P1P0718-R M-1060C/M-1 1 10C, Issue Number 1 M-1060C M-1110C SANYO’S HELP-LINE Call the toll-free number below if you have any difficulties operating this product.
CONTROLS (Fig. 1) 1. Battery/Operation indicator (BA TT/OPR) (M-1 1 10C only) 2. V oice activated system switch (V AS) (M-1 1 10C only) 3. V olume control (VOLUME) 4. Microphone jack (MIC) (M-1 1 10C only) 5. Earphone jack (EAR) 6. Built-in microphone Fig.
-E2- 7. Cassette compartment 8. Battery compartment (back panel) 9. T ape counter and reset button (M-1 1 10C only) 10. Record button (REC) 1 1. Play button (PLA Y) 12. External DC 3V jack (EXT DC 3V) 13. Fast forward/Cue button (FFWD/CUE) 14. Rewind/Review button (REW/REV) 15.
-E3- Battery replacement When the BA TT/OPR indicator (M-1 1 10C only) does not light during operation or is lit dimly, replace the batteries. • When replacing the batteries, use two new batteries of the same type. Do not mix a used battery with a new one or mix different types of batteries.
-E4- IMPORT ANT NOTE: SPENT NICKEL-CADMIUM RECHARGE- ABLE BA TTER Y MUST BE RECYCLED OR DISPOSED OF PROPERL Y IN COMPLIANCE WITH ALL APPLICABLE LAWS. FOR DET AILED BA TTERY RECYCLING INFORMA TION, CONT ACT THE RECHARGE- ABLE BA TTER Y RECYCLING CORPORA- TION A T 1-800-822-8837.
1. Load a cassette as shown in Fig. 6. 2. Press the reset button to set the counter to “000”. The counter shows relative tape position. (M-1 1 10C only) 3. Set the V AS switch to ON or OFF . (M-1 1 10C only) 4. Press the REC button. (The PLA Y button is engaged simultaneously.
-E6- Fast forwarding or rewinding In the stop mode, press the FFWD/CUE or REW/REV button. Press the STOP button when the desired point or end of the tape is reached. T emporarily stopping operation (all modes) Slide the P AUSE switch right. Slide it left to resume operation.
PLA YBACK (Fig. 8) 1. Load the cassette as shown in Fig. 6. 2. Press the PLA Y button and adjust the VOLUME control. 3. Press the STOP button to stop playback. Cue and reviewing While playback, press and hold the FFWD/CUE or REW/REV button. Release the button when the desired point is reached.
SANYO SERVICE PLUS LIMITED WARRANTY DICT A TION PRODUCTS ONL Y OBLIGA TIONS In order to obtain factory warranty service for Sanyo Dictation Products, call the toll-free number below. The unit must be packed in the original carton or a well-padded sturdy carton in order to avoid shipping damage.
-E9- 21605 Plummer Street Chatsworth, CA 91311 -S9- 21605 Plummer Street Chatsworth, CA 91311.
An important point after buying a device Sanyo M1060C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo M1060C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo M1060C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo M1060C you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo M1060C will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo M1060C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo M1060C.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo M1060C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo M1060C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
