Instruction/ maintenance manual of the product LNS-W04 Sanyo
Go to page of 6
LCD PR OJECT OR LENS MODEL NO . LNS-W04/LNS-W05/LNS-W06/LNS-W07 LENS INST ALLA TION AND REPLA CEMENT PR OCEDURES NO TES ON REPLA CEMENT AND INST ALLA TION The procedures and the needed pars f or lens installation depend on the type of cabinet.
Not all the par ts included ma y be used f or lens installation or replacement. K eep these par ts f or later use. Note : Illustrations in this manual ma y differ from the actual product. NO TES ON LENS INST ALLA TION • Lens installation and replacement should be made by the qualified service per- sonnel.
LENS REPLA CEMENT AND INST ALLA TION PROCEDURE -2- 2 Pulling up Light Block Sheet Holder and Cover Plate, remove them. (See Fig-2) Fig-1 Front Cover A Fig-2 Fig-3 1 Disconnect the power cord from AC outlet. Remove 5 screws (A) from the front cabinet. Pulling up the front cover and remove it.
-3- 4 Remove lens cap on the rear (mounting side) of the projection lens and mount Lens Attachment to the lens with four screws included with the lens. Insert the connector at the end of Lens Motor Lead into the socket located at right-top of the lens attachment.
-4- Release Lens Lock (Clockwise) Fix Lens Lock (Anticlockwise) Fig-6 Fig-7 Pinch the tab and turn the lever clockwise to unlock the lens. Pinch the tab and turn the lever anti- clockwise to lock the lens. CA UTION: T ur n the Lens Lock Lev er anticloc kwise until the lens is lock ed.
-5- 6 Install Light Block Sheet and Light Block Sheet Holder corresponding to the lens into the projector. (See Fig-8 and Fig-9.) Appropriate light block sheet varies depending on the Lens Model No. Check Type No. on the light block sheet and Lens Model No.
An important point after buying a device Sanyo LNS-W04 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo LNS-W04 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo LNS-W04 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo LNS-W04 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo LNS-W04 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo LNS-W04, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo LNS-W04.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo LNS-W04. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo LNS-W04 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
