Instruction/ maintenance manual of the product LNS-T03 Sanyo
Go to page of 8
T ype of the Cabinet (1) (See P age 2) LCD PR OJECT OR LENS MODEL NO . LNS-T03 LENS REPLA CEMENT AND INST ALLA TION PR OCEDURES NO TES ON REPLA CEMENT AND INST ALLA TION The procedures and the needed pars f or lens installation depend on the type of cabinet.
Not all the par ts included ma y be used for lens installation or replacement. K eep these par ts f or later use. Note : Illustrations in this manual ma y differ from the actual product. NO TES ON LENS INST ALLA TION • Lens installation and replacement should be made by the qualified service per- sonnel.
LENS REPLA CEMENT AND INST ALLA TION PROCEDURE {T ype (1) Cabinet} -2- 1 Remove 2 Screws A and Remove Lower Lens Cover. Push part B and pull the Lower Lens Cover down and remove it. (See Fig. 1.) 2 Remove 4 Screws C. Pull the Upper Lens Cover toward front and remove it.
-3- LENS LOCK RELEASE Fig-4 LENS LOCK 4 Remove Lens Protection Cap from the rear (mounting side) of the Projection Lens and attach the lens Attachment to the lens with 4 Screws. (Use screws attached to the lens.) See Fig. 4. 5 Grasp (release lock) the Lens Lock Lever and turn it fully upward.
-4- 7 Put back the Upper Lens Cover to the projector and Fix the Upper Lens Cover with 4 Screws C. (See Fig. 2.) Put back the Lower Lens Cover to the projector.
LENS REPLA CEMENT AND INST ALLA TION PROCEDURE {T ype (2) Cabinet} -5- 2 Remove 4 Screws C. Pull the Lower Lens Cover toward front and remove it. (See Fig.
-6- LENS LOCK RELEASE Part No. (610 275 6029) Fig-4 LENS LOCK 4 Remove Lens Protection Cap from the rear (mounting side) of the Projection Lens and attach the lens Attachment to the lens with 4 Screws. (Use screws attached to the lens.) See Fig. 4. 5 Grasp (release lock) the Lens Lock Lever and turn it fully upward.
-7- Fig-8 LOWER LENS COVER UPPER LENS COVER 7 Put back the Lower Lens Cover to the projector and Fix the Lower Lens Cover with 4 Screws C. (See Fig. 2.
An important point after buying a device Sanyo LNS-T03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo LNS-T03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo LNS-T03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo LNS-T03 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo LNS-T03 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo LNS-T03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo LNS-T03.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo LNS-T03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo LNS-T03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
