Instruction/ maintenance manual of the product KS2462R Sanyo
Go to page of 24
Pub. OI-85464189508000 ©SANYO 2002 INS TRUCTION MANU AL Split S yst em Air Conditioner Sav e These Instr uctions! Printed on Recycled Paper KS2462R COOL/DR Y Model In order to protect the environment, this air conditioner uses the new refrigerant R41 0A.
Features This air conditioner is equipped with cooling and drying functions. Details on these functions are provided below; refer to these descriptions when using the air conditioner .
Contents Page Features .................................................................................................................. 2 Product Information ...........................................................................................
Installation Location • We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. • Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate.
Names of Parts NOTE This illustration is based on the external appearance of a standard model. Consequently , the shape may differ from that of the air conditioner which you have selected. This air conditioner consists of an indoor unit and an outdoor unit.
Unit Display and Operation Selector REMOTE CONTROL receiver This section picks up infrared signals from the remote control unit (transmitter). Operation selector ON position This position is for operating the air conditioner with the wireless remote control unit.
Remote Control Unit (Display) (1) Operation mode MILD DRY................................ COOL ....................................... (2) Fan speed AUTO ....................................... HIGH ........................................ MEDIUM ....
8 OI- 508 - 0 8 E G Sensor T ransmitt er Display NIGHT SETBA CK button 1 HR. TIMER but ton MODE select or button FLAP but ton ADDRESS switch (Cov er closed) ON/OFF operation but ton T emperat ure set .
9 OI- 508 -9 E G Remote Contr ol Unit (continued) Progr am butt on F or details, see “Set ting the Timer” . Press this but ton to select the mode you want to program. TIMER SELECT but ton No display : The timer does not operate. : The air conditioner stops at the set time.
Using the Remote Control Unit How to Install Batteries NOTE • The batteries last about six months, depending on how much you use the remote control unit. Replace the batteries when the remote control unit ’ s displa y fail s t o indicate , o r whe n th e remot e contro l canno t b e used t o chang e th e ai r conditioner ’ s settings.
11 OI -508 - 1 1 E G Using the Remote Contr ol Unit (continued) Mounting the Remote Contr ol Unit When attac hing to w all 1) Confirm the indoor unit beeps when the ON/OFF but ton is pressed at the w all location where the remote control unit is to be attac hed, then attac h the holder to the w all.
Set the FAN SPEED selector button to the setting you want. If the fan speed is set to (Automatic), the fan speed switches automatically, according to the difference between the actual room temperature and the temperature setting. Operation with the Remote Control Unit 1.
Operation with the Remote Control Unit (continued) NOTE • This appliance has a built-in three minutes time delay circuit to ensure reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop.
Operation with the Remote Control Unit (continued) 3. Night Setback Mode The Night Setback Mode is used for saving energy . Press the NIGHT SETBACK button while the air conditioner is operating. The mark appears in the display . T o cancel the night setback function, press the NIGHT SETBACK button again.
Special Remarks ‘ ‘DRY’ ’ ( ) Operation How it works? • Once the room temperature reaches the level that was set, the unit repeats the cycle of turning on and off automatically .
16 OI- 508 - 1 6 E G S et ting the T imer 1 . Ho w to set the pr esent time (Example) T o set to 9:1 0 pm. Operation Indication 1 . Press the P rogram but ton ( ) three times. 2. • Press the HH but ton until PM 9 is displayed. • Press the MM but ton until 1 0 is displayed.
17 OI- 508 - 1 7 E G Set ting the Timer (continued) 3 . How t o set the ON time (Example) T o star t operation at 7:1 0 am. Operation Indication 1 . Press the P rogram but ton ( ) twice. 2. • Press the HH but ton until AM 7 is displayed. • Press the MM but ton until 1 0 is displayed.
18 OI- 508 - 1 8 E G S et ting the 1 -Hour OFF T imer 1 . 1 -Hour OFF Timer This function causes the unit t o operat e for one hour and then st op, r egar dless of whether the unit is on or of f when this butt on is pr essed. The indicator in the display indicates that this function is operating.
19 OI- 508 - 1 9 E G Adjusting the Airflow Direction 1 . Hor izontal The horiz ontal airflow can be adjusted by moving the ver tical vanes with your hands to the lef t or right. CA UTION When the humidity is high, the ver tical v anes should be in the fr ont position dur ing the cooling or drying operation.
20 OI- 508 -20 E G Operation without the R emote Control Unit If you have lost the remote control unit or it has trouble, follow the steps below . 1. When the air conditioner is not running If you want to turn on the air conditioner , switc h the operation selector to the OFF position, and then to the ON position.
21 OI- 508 -21 E G 1. With the ˝FRON T˝ mark facing you, slide the anti-mold filter up into the unit and then lower the handle into the groove on the unit. 2. After installing the anti-mold filter , press the locations marked by the arrows ( ) and close the air intake grille.
22 OI- 508 -22 E G Car e and Cleaning (continued) Air cleaning filter (not pr ovided) The air cleaning filter remo ves dust and dirt from the air , and reduces odor s and smoke from tobacco. NO TE The air clean filter is not provided with the air conditioner and must be purc hased separately .
23 OI- 508 -23 E G Car e and Cleaning (continued) Removing and r emounting the air intak e gr ille • With the air intake grille open all the way , grip both arms with your hands and pull toward you to remove.
24 OI- 508 -24 E G T roubleshooting If your air conditioner does not work properly , fir st c hec k the following points before requesting service. If it still does not work properly , contact your dealer or service center . T rouble P ossible Cause Remedy Air conditioner does not run at all.
An important point after buying a device Sanyo KS2462R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo KS2462R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo KS2462R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo KS2462R you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo KS2462R will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo KS2462R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo KS2462R.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo KS2462R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo KS2462R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
