Instruction/ maintenance manual of the product AH-23631 Sanyo
Go to page of 6
Af ter the lens replacement (before at tac hing the top cabinet), c hec k the following things. 1 . Chec k the lens is properly installed. 2. Chec k no wiring is tangled on the gear of the lens motor or other mec hanical par ts. 3. Chec k no par ts is missing, or no mounting par t is lost.
-2- Lens Replacement Pr ocedur e While pressing the Lens release button on the top of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector . Be careful not to drop the lens. Remo v e the Lens 1 2 P erform the steps 1-2 for lens replacement.
-3- Lens Replacement Pr ocedur e 1. T urn the Lens Cover counter -clockwise and pull it toward front to remove the Lens Cover . 2. Remove the two screws (SCREW "A") and remove the T op Cabinet.
1. Remove the protective caps (front and back) on the lens. 2. Put the Light-Block Sheet through the lens. {When LNS-W11 (AH-23631) is installed, the Light Block Sheet is unnecessary .} 3. Insert the lens into the Lens Bracket of the projector as matching the red mark on the lens to that on the Lens Bracket.
-5- Mount the Light-Block Sheet Base. UP T urn the projector on and check Lens shift, Zoom and Focus is operating properly . If Light-Block Sheet interfere with those operations, check if the Light-Block Sheet is set properly . LNS-W11 (AH-23631) cannot adjust the Zoom and Focus at the Remote control or the projector .
Set up the projector in the place where it is to be used, turn on the power and project a picture. Adjust the position of the projector to suit the projection position. 1. T urn the focus ring to adjust the focus at the center of the screen. The focus at the edges of the screen may not be as sharp as at the center of the screen.
An important point after buying a device Sanyo AH-23631 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo AH-23631 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo AH-23631 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo AH-23631 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo AH-23631 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo AH-23631, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo AH-23631.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo AH-23631. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo AH-23631 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
