Instruction/ maintenance manual of the product VMAA26 Sanus Systems
Go to page of 8
Assembly Instructions for Model: VMAA26 Thank you for choosing a Sanus Systems VisionMount™ wall mount. The VMAA26 is designed to mount up to 50” Flat panel televisions weighing up to 130 lb. to a vertical wall. It allows you to tilt the television from +5° to -15°.
Hardware: (Hardware shown is actual size) Wire T ie Clip - G Qty . 7 Wire T ie - H Qty . 10 7/32 & 3/16 Allen Keys - K Qty . 1 Each Lag Bolt W asher - J Qty . 4 Lag Bolt - I Qty . 4 Safety Bolt - N Qty . 3 Preventor Bolt - O Qty . 2 1/4-20 Nut - M Qty .
Step 1: Mounting Monitor Brackets to a T elevisions with a at back NOTE: For TVs with a curved back or any other obstruction See Step 2. After completing this step, proceed to Step 3. Determine the diameter of the Bolt ( P ,Q,R,S ) your TV requires by hand threading them into the threaded insert on the back of the TV .
Step 2: Mounting the Monitor Brackets to T elevisions with a curved back or other obstruction. Determine the diameter of the Bolt ( T ,U,V ,W ) your TV requires, by hand threading them into the threaded insert on the back of the TV . If you encounter any resistance stop immediately .
Step 3: Add the Vise Assemblies to the Monitor Brackets: NOTE: Do not overtighten the 1/4-20 Nut (M). The Vise Assembly (F) should be able to rotate freely around the Carriage Bolt (L).
Step 4: Attach the Arm Assembly to the T elevision (Continued) CAUTION: The 1” Diameter T ubes (D) must extend beyond the outside edges of both Monitor Brackets (E) and the Allen Bolts in all 6 Vise Assemblies (F) must be tightened.
Step 7: Leveling the Monitor and Adjusting the T ension CAUTION: Do not remove the T ension Nuts in Diagram 7. Removing T ension Nuts will result in property damage. Once the television is mounted onto the W all Plate ( A ), and the Safety Bolts ( N ) are tight, it can be adjusted to level.
Step 8: Add Preventor CAUTION: A void Pinch Points. Placing your hands or ngers between moveable parts (Pinch Points) may result in personal injury Determine which direction you want the Arm to fold. If you want the Arm to fold to the right, place the Preventor ( C ) on the right side of the Arm Assembly ( B ).
An important point after buying a device Sanus Systems VMAA26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems VMAA26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems VMAA26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems VMAA26 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems VMAA26 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems VMAA26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems VMAA26.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems VMAA26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems VMAA26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
