Instruction/ maintenance manual of the product VM200 Sanus Systems
Go to page of 4
Assembly Instructions for Model: VM200 Thank you for choosing a Sanus Systems V isionMount™ wall mount. The VM200 is designed to mount up to 40″ LCD TVs weighing less than 80 lbs [36.
Step 1: Mount Monitor Brackets to a television with a at back NOTE: For televisions with a curved back, or an obstruction near the threaded insert see Step 2. Determine the diameter of the Bolt ( G,H,I ) your TV requires by hand threading them into the threaded insert on the back of the TV .
Step 2: Mount Monitor Brackets to a television with a curved back or an obstruction near the threaded insert Determine the diameter of the Bolt ( J,K,L ) your TV requires by hand threading them into the threaded insert on the back of the TV . If you encounter any resistance stop immediately .
Step 3: Mounting the W all Plate - wood stud, brick, solid concrete and concrete block mounting options are provided Wood Stud Installation: CAUTION: Do not over tighten the Lag Bolts. Tighten Lag Bolts (D) only until the Lag Bolt W asher (E) is pulled rmly against the Wall Plate (A).
An important point after buying a device Sanus Systems VM200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems VM200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems VM200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems VM200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems VM200 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems VM200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems VM200.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems VM200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems VM200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
