Instruction/ maintenance manual of the product LAS1A Sanus Systems
Go to page of 8
Sanus Systems 2221 Hwy 36 W est, Saint P aul, MN 55113 USA Customer Service: 1-800-359-5520 • info@sanus.com • www .sanus.com LAS1A (6901-100147 <01>) Thank you f or choosing the S anus Systems LAS1A. The LAS1A is designed to mount speakers on each side of a large VisionMount full motion TV mount.
6901-100147 <01> 1/4-20 x 2.0 in. 1/4-20 x 3/8-16 1/4-20 x 3/8-16 M4 x 35mm 1/4-20 1/4-20 Nyloc 1/4-20 x 0.5 in. M4 x 16mm 1/4-20 x 0. 7 5 in. M4 M6 M6 M4 M6 M4 1/4-20 x 1.5 in. 1/4-20 x 1.25 in. Supplied Parts and Hardware Before starting assembly , verify all par ts are included and undamaged .
6901-100147 <01> 1: Pr epara tion 1- 1: New Installations If you hav e purchased a Sanus Systems large VisionM ount™ F ull Motion Mount, but have not installed it, begin by following the large VisionMount™ Full Motion Mount instructions. R eplace Cross T ube Installation with Step 2: Cross T ube Installation of the LAS1A instructions.
6901-100147 <01> 2: Cross T ube Installation Slide the cross tubes [ 02 ] into the first monitor br ack et [ G ], through the arm assembly [ H ] and then through the second monitor bracket [ J ]. Center the cross tubes on the back of the T V . Using the Allen Key , tighten the six vise assemblies until the cross tubes no longer rotate .
6901-100147 <01> 4: Install Thr eaded T ube Clamp & Clamp Knob Slide the threaded tube clamps [05] onto the extension tubes [03] , aligning the notches in the threaded tube clamp and cross tubes [ 02 ]. Snap the threaded tube clamps onto the cross tubes .
6901-100147 <01> 6: A ttach Speaker Br ackets Slide the speaker brackets [ 01 ] into the extension tubes [ 03 ]. Use the Allen key to tighten the f our vise assemblies [ 04 ] until the speaker brackets do not slide on the extension tubes. [01] [03] [04] [03] [25] Maximum extension of the cross tubes is 145cm (57 in.
6901-100147 <01> [08] - [13] 7: A ttach Speakers The speaker wires may be rout ed to the speaker terminals through the extension tubes [03] . Refer to the instructions provided with the large V isionMount™ F ull Motion M ount for routing speaker wires.
6901-100147 <01> CSA V , Inc. and its afliated corporations and subsidiaries (collectively , “CSA V”), intend to make this manual accurate and complete. However , CSA V makes no claim that the information contained herein covers all details, conditions, or variations.
An important point after buying a device Sanus Systems LAS1A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems LAS1A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems LAS1A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems LAS1A you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems LAS1A will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems LAS1A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems LAS1A.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems LAS1A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems LAS1A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
