Instruction/ maintenance manual of the product CFAR47 Sanus Systems
Go to page of 13
Assembly Instructions for Model: CF AR47 Thank you for choosing the Component Furniture line from Sanus Systems! Use this manual to congure the CF AR47 as shown on the right.
Parts: Not all parts shown at the same scale (1) Shelf Retainer - u (1) Shelf Bracket - v (4) Small Door Hinge - w (4) Foot - s (4) Door Knob - t ** (4) Hinge Plate - x** (4) Bi-fold Hinge - y (4) Hin.
Step 1: Add Wood Shelf Pins and Feet to Side Panels Insert a W ood Shelf Pin (h) into the holes adjacent to the two lower sets of cams in each Side Panel (ee). See Detailed V iew A of Diagram 1 for assistance. Add a Foot (s) to each pillar of the Side Panel (ee).
Step 2: Add Front and Back Rails Add Front Rails - Attach the Front Rail (cc) to the Side Panel Assembly (ee) by sliding the clamp down the groove in each Side Panel pillar as shown in the T op V iew of Diagram 2.
Step 3: Prepare TV Shelf Insert two W ood Screws (i) through the Shelf Bracket (v) and into the underside of the W ood Shelf (kk). T ighten each W ood Screw with a phillips screw driver . See Diagram 3 for assistance. Diagram 3 k k i v Step 4: Add Wood Shelves Press t the W ood Shelves (kk) so they lock into the W ood Shelf Pins (h).
Step 5: Secure upper Wood Shelf Secure the Shelf Retainer (u) to the upper W ood Shelf (kk) by inserting a W ood Screw (i) through the Shelf Retainer and thread it into the W ood Shelf. Secure the Shelf Bracket (v) to the upper Back Rail (dd) by threading a Phillips Pan Head Bolt (e) through the Shelf Bracket and into the Back Rail (dd).
Step 7: Add Front and Back Rail Add Front Rail - Attach the Front Rail (cc) to the Side Panel (ee) by sliding the clamp down the groove in each Side Panel pillar as shown in the T op V iew of Diagram 7. Make sure the smooth side of the Front Rail is facing outward and the open channel faces down.
Step 8: Add Back Panels Add Back Panels (ff) to the assembly by inserting a Back Panel Bolt (d) through each hole in the Back Panels, a Spacer (c) and thread it into the inserts in the Back Rail (dd). Before tightening the Back Panel Bolts, insert the Furniture Bracket (aa) under the Back Rail.
Step 9: Add T op Insert a Dowel (f) into each hole in the bottom side of the T op (ii). Add T op so each Dowel is secured in the corner pillar in the Side As - sembly (ee).
Step 1 1: Add Hinges and Knobs Add Hinges (w ,y) to the Doors (gg,hh) by inserting a Hinge Screw (l) through the Hinge and into the Door . T ighten each with a phillips screw driver . Attach the Door Knobs (t) by inserting a Knob Bolt (j) through the Door (gg,hh) and into the Door Knob.
Step 12: Add Hinge Plates and Small Doors Add the Hinge Plates (x) by inserting a Hinge Plate Screw (k) through the Hinge Plate, and into the holes in the Side Panel (ee). T ighten each with a phillips screw driver . Repeat the process for all four Hinge Plates.
Step 14: Secure W all Bracket to wall Locate two wood studs using a stud nder . It is a good idea to verify where the stud is with a awl or a thin nail. Mark the location of each stud. T o nd the height, measure 54 inches up from the oor . Mark the location on the stud.
Step 16: Hinge Adjustment for small Door Each hinge Assembly is adjustable in multiple directions. See Diagram 16 for assistance. Diagram 16 Side Adjustment Depth Adjustment Height Adjustment Step 17: Hinge Adjustment for Bi-fold Door T o adjust the Bi-fold Hinges (y), loosen the screws labeled in the Diagrams below for the specied movement.
An important point after buying a device Sanus Systems CFAR47 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems CFAR47 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems CFAR47 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems CFAR47 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems CFAR47 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems CFAR47, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems CFAR47.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems CFAR47. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems CFAR47 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
