Instruction/ maintenance manual of the product X65 Samsung
Go to page of 195
User Guide X65.
Chapter 1. Getting Started Product Features 2 Before Y ou Start 3 Contents 5 Safety Precautions 6 Proper Posture During Computer Use 1 5 Important Safety Information 1 8 Replacement Parts and Accessor.
2 High Performance Notebook Computer A high performance computer adopting the latest CPU and DDR II memory ■ Intel Core™2 Duo Processor , DDR II Memory ■ Wireless LAN * , Bluetooth * ■ 15.
3 Before Y ou Start Before reading the User Guide, first check the following information. User Guide Information This product is supplied with an Installation Guide , and a User Guide . Y ou can even more easily and conveniently use the computer by using any of the guides depending on your needs.
4 Safety Precaution Notations Icon Notation Description W arning Failing to follow instructions marked with this symbol, may cause personal injury and or fatality . Caution Failing to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property .
5 Contents Chapter 1. Getting Started Product Features 2 Before Y ou Start 3 Contents 5 Safety Precautions 6 Proper Posture During Computer Use 1 5 Important Safety Information 1 8 Replacement Parts a.
6 Installation Related Power Related Do not install the product in places exposed to humidity such as a bathrooms. There is a danger of electric shock. Use the product within the operating conditions specified in the Manufacturers User Guide. Keep the plastic bags out of the reach of children.
7 If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center . There is a danger of electric shock or fire hazard. Do not use a damaged or loose mains plug or power cord or power outlet.
8 Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Battery Usage Related If water or another substance enters the power input jack, AC adapter or the computer , disconnect the power cord and contact the service center .
9 Do not place any container filled with water or chemicals over or near the computer . If water or chemicals enter the computer , this may cause fire or electric shock. If the computer is broken or dropped, disconnect the power cord and contact a service center for a safety check.
10 Shut down the computer and disconnect all cables before disassembling the computer . If there is a modem, disconnect the phone line. If you are using a notebook computer , make sure to remove the battery . Failing to do so, may cause electric shock.
1 1 Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Installation Related Battery Usage Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
12 Usage Related Do not place a candle, lighted cigar , etc. over or on the product. There is a danger of fire. Make sure to have the product tested by a safety service engineer after repairing the product. Authorised Samsung Repair Centers will carry out safety checks after a repair .
13 Upgrade Related T ake care when touching the product or parts. The device may be damaged or you may be injured. T ake care not to throw or drop a computer part or device. This may cause injury or damage to the product. Make sure to close the computer cover before connecting the power after a reassembly .
14 Custody and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables. For long periods of not using the notebook computer , discharge the battery and preserve as it is detached.
15 Proper Posture Adjust the heights of desks and chairs appropriate to your height. The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair . Adjust the height of chair so that your heel is comfortably placed on the floor .
16 Eye Position Keep the monitor or LCD away from your eyes by at least 50cm. ■ Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. ■ Avoid setting the monitor and LCD excessively bright.
17 V olume Control (Headphones and Speakers) Check your volume first to listen to music. ■ Check if the volume is too loud before using headphones. ■ It is not recommended using headphones for long periods of time. Use Time (Break T ime) ■ T ake a break for 10 minutes or more after a 50-minute period when working for more than one hour .
18 Y our system is designed and tested to meet the latest standards for safety of information technology equipment. However , to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.
19 Care During Use ■ Do not walk on the power cord or allow anything to rest on it. ■ Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. ■ Some products have a replaceable CMOS battery on the system board.
20 Caution Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer . Follow all local regulations when disposing of old batteries.
21 The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord out by pulling the cable only .
22 Regulatory Compliance Statements Wireless Guidance Low power , Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device.
23 Caution ■ Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane.
24 USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body , especially the face or eyes, while transmitting.
25 Caution This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
26 Caution Wireless devices are not user serviceable. Do not modify them in any way . Modification to a wireless device will void the authorization to use it.
27 This equipment cannot be used on public coin phone service provided by the telephone company . Connection to party line service is subject to state tariffs.
28 This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter .
29 European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below .
30 T ranslated Statements of Compliance [English] This product follows the provisions of the European Direc- tive 1999/5/EC. [Danish] Dette produkt er i overensstemmelse med det europæiske direktiv 1999/5/EC [Dutch] Dit product is in navolging van de bepalingen van Europ- ees Directief 1999/5/EC.
31 General European standards dictate maximum radiated trans- mit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium The product may be used outdoors, but for outdoor trans- missions over a distance of 300m or more, a license from the BIPT is required.
32 WEEE SYMBOL INFORMA TION Correct Disposal of This Product (W aste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection syst.
33 Overview Before Y ou Start! ■ * The items marked with this symbol are optional items which may be changed or may not be provided depending on the computer model. ■ The actual color and appearance of the computer may differ from the pictures used in this guide.
34 7 Charge Status This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Amber: When the battery is being charged. Off: When the computer is running on battery power without being connected to AC adapter .
35 6 Power This shows the computer operating status. On : When the computer is operating Blinks: When the computer is in Sleep mode. Right V iew 2 CD Drive * Plays CD or DVD titles. Since an ODD drive is optional, the installed drive depends on the computer model.
36 Left V iew 2 Fan V ents The internal heat of the computer is emitted through these holes. Caution If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. 3 Modem Port * A port to which a telephone cable is connected to in order to dial up to the Internet.
37 4 Wired LAN Port Connect the Ethernet cable to this port. p. 91 5 Security Lock Port Y ou can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. Back V iew 2 Battery This is a Lithium-Ion rechargeable battery that supplies power to the computer .
38 Bottom V iew 1 Battery Latches The latch used to remove or install the battery . p. 138 3 Memory Compartment Cover The main memory is installed inside the cover . p. 136 2 Hard Disk Drive Compartment Cover The hard disk drive is installed inside the cover .
39 T urning the Computer On and Off T urning the computer on 1 Install the battery and connect the AC adapter . (Refer to the Installation Guide .). 2 Slide the LCD Latch to the right and then lift up the LCD panel. 3 Press the Power button to turn the computer on.
Chapter 2. Using the computer Keyboard 41 T ouchpad 4 4 Using the Remote Control (Optional) 4 7 CD Drive 50 Inserting and Ejecting a CD 50 Burning a CD 51 HD DVD (Optional) 5 2 Blu-ray (Optional) 5 4 .
41 Keyboard Note The keyboard is supplied according to the corresponding country . Refer to the keyboard figure for the corresponding country . United Kingdom United States.
42 Shortcut Keys Y ou can use the following functions by pressing the keys below with the Fn key . Fn+ Name Function REST (Sleep Mode) Switches to Sleep mode. T o wake the computer up, press the Power button. Gauge Shows the remaining battery charge. Y ou can only use this function when the Easy Display Manager program is installed.
43 Screen Brightness Control T o adjust the LCD brightness press the Fn + ( ) key combination or the Fn + ( ) key combination. The changed screen brightness is displayed at the center of the screen for a moment. V olume Control T o control the volume, press the Fn + ( ) key combination or the Fn + ( ) key combination.
44 T ouchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Before Y ou Start! ■ Use the T ouchpad with your fingers. Using a sharp object may damage the T ouchpad.
45 Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger . The mouse cursor will move accordingly . Move your finger in the direction you wish to move the cursor . Click Function Place your finger on the touchpad and tap your finger once over an item you want.
46 Drag Function Dragging refers to moving an item to another place after selecting it. Press and hold down the left touchpad button over an item you want to drag and move the item to the new location. T ouchpad Scroll Function The touchpad scroll area provides the mouse wheel function (scroll function).
47 Using the Remote Control (Optional) Using the remote control for the computer is described below . T o use the remote control, install the supplied battery into the remote control first. Installing Battery 1 Move the groove (◄) on the cover to the (●) position by using a coin and open the battery cover .
48 Remote Control Buttons 1 Power / Sleep Button Press to turn the computer on or to enter Sleep mode. 3 BACK Button * Press to return to the previous step. 4 Direction Button * Press to move to an item. 5 These buttons are not use. 2 Playback Control Button 8 ENTER Button Press to execute the selected item.
49 Remote Control Operating Range The valid distance for the remote control is determined by the user environment. It is recommended to use the remote control within 3 meters and a 45 degree angle from the remote control sensor on the device.
50 CD Drive An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalog. Before Y ou Start! One of the following optical disk drives is installed on this computer . Drive T ype Function DVD-ROM Reads CD/DVD.
51 If your computer has a writable CD drive, you can write data onto a CD or DVD or burn an audio CD. CyberLink DVD Suite is supplied with the System Software Media (or an additional CD) so that you can burn a CD using the program. Install the provided software and use the software functions referring to the software help.
52 HD-DVD is a next generation storage media that can save more data then the existing DVD format. Y ou can record and play better quality HD movies than the existing SD-grade DVD format. T ype HD DVD DVD CD Logo Storage Capacity 15 GB / 30 GB 4.7 GB / 8.
53 About HD DVD The CyberLink HD DVD Solution program is provided so that users with HD-DVD Drives can conveniently and easily record multimedia files and other data onto HD D VD disks. Note For a more detailed description of the functions, refer to the help section of the corresponding program.
54 Blu-ray is a next generation storage media that can save approximately 5 to 10 times more data then the existing DVD format. Y ou can record and play better quality HD movies than the existing SD-grade DVD format. T ype Blu-ray DVD CD Logo Storage Capacity 25 GB / 50 GB 4.
55 About Blu-ray The CyberLink BD Solution (hereafter CBDS) program is provided so that users with Blu-Ray Drives can conveniently and easily record multimedia files and other data onto Blu-ray disks. Note For a more detailed description of the functions, refer to the help section of the corresponding program.
56 Multi Card Slot Using the multi card slot, you can read and write data to a Memory Stick, Memory Stick Pro, SD card, MMC, MMC Plus, and xD card. Y ou can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder , MP3, etc.
57 T o Insert and Use a Memory Card 1 Insert a card into the slot according to the directions printed on the slot. 2 The card drive appears. Click Open folder and view files . If the window does not appear , click Start > Computer . Note If a window asking to scan and change appears, click Continue Without Scanning .
58 T o remove a memory card 1 Push the tip of the card lightly . 2 If the card pops up with a clicking sound, remove the card. T o format a memory card Y ou have to format a card first to use it. Caution Formatting a card deletes all data saved on the card.
59 T o insert a PC card 1 Insert a PC card into the PC card slot on the side of the computer . 2 If you insert a card into the slot, Windows recognizes^pthe card automatically or a message telling^pyou to install a driver appears. If the card is not^pautomatically recognized, install the device driver^psupplied with the card.
60 Connecting a monitor / TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your monitor . Before Y ou Start! Y ou have to buy a connection cable additionally . Connecting to the Monitor port Connect the monitor to the Monitor port.
61 Since the port to connect to a TV dif fers depending on the port type used to connect the TV , connect as follows. Connecting to the Monitor port Connect the monitor and computer using the PC Input (RGB) port on the TV with the monitor cable (15pin).
62 V iewing Through a Monitor Y ou can switch the display device using the shortcut key . Switching the Display Device using the Shortcut Key Press the Fn + ( ) key combination once. Then the Easy Display Manager screen appears in which you can select a display device.
63 Adjusting the V olume using the Keyboard Press the Fn + ( ) key combination or Fn + ( ) key combination to adjust the volume. Press the Fn + ( ) key combination to turn the volume on or off. Adjusting the V olume using the V olume Adjustment Program Click the V olume icon ( ) on the taskbar and slide the volume control bar to adjust the volume.
64 Using SRS The SRS function enables you to experience more stereophonic sound using stereo speakers. 1 Right-click over the V olume icon ( ) in the T askbar and select Play Device (P) . 2 Select Speaker in the Play tab and click Properties . 3 Select the SRS tab in the Speaker Properties window .
Chapter 3. The screen shots used in this chapter may differ from actual screens depending on the Windows V ista version and model. Using Microsoft W indows V ista About Microsoft Windows V ista 66 Wel.
66 In the Welcome Center , you can view brief descriptions of Windows Vista functions and run the functions directly . 1 Click Start ( ) > W elcome Center . 2 If you click on an item, information on the function is displayed in the description window .
67 Help and Support Windows Help and Support provides information on Windows basic functions and usages. Click Start ( ) > Help and Support . Y ou can find help for frequently used basic functions using Find an Answer and you can search for help by entering a keyword in the Search box.
68 Windows V ista Screen Layout Desktop If you turn the computer on, the Desktop screen appears. The desktop is the working area on the computer . It consists of a large workspace and a taskbar at the bottom as shown in the figure below . Note The screen layout may differ depending on the computer model and the operation system version.
69 1 Recycle Bin Y ou can drop useless files and folders here. 2 Shortcut Icons Y ou can launch programs by clicking the shortcut icons on the Desktop. 3 Start Menu The menu from which you can launch programs. 4 Start Button Press the start button. The Start menu appears.
70 Start Menu The menu from which you can launch programs. Click Start ( ). The Start menu appears. Alternatively , press the Windows key ( ) on the keyboard. Fixed Programs The program or search result is displayed. All Programs Y ou can search for files, folders, etc.
71 Search Enables users to search for files and folders. Computer Shows storage devices such as hard disk drives, CD/DVD drives, network drives, etc. In addition, you can manage files and folders here.
72 Sidebar / Gadget Sidebar is a vertical bar that appears at the side of the Desktop. A mini program called Gadget runs over the Sidebar which shows information such as stocks, schedule, weather , etc. and provides frequently used tools. Y ou can download various Gadgets from the Internet other than the default Gadget.
73 Adding a Gadget Y ou can find a gadget in the Gadget Gallery and add it to the Sidebar . 1 If you click the + at the top of the Sidebar , the Gadget Gallery opens. 2 If you double-click on a gadget, the gadget is added to the Sidebar . Note ■ Y ou can move a gadget to another location by dragging it with the mouse.
74 Exiting the Sidebar Right-click on the Sidebar icon ( ) in the System T ray with the clock on the taskbar and select Exit to exit the Sidebar . Note Closing the Sidebar ■ Even if you close the Sidebar , the Sidebar continues running in the System T ray in the clock area, though it is not displayed on the Desktop.
75 Window A window is the basic frame for a computer operation. As an example, let’s see the layout of a Pictures Window . Click Start ( ) > Pictures. Note The items and names may differ depending on your computer model and the Windows V ista version.
76 1 Address Display Line Shows the location of the currently selected folder or file. 2 Move Button Y ou can move to the previous or next page by clicking the Back or Next buttons. Opens the previously opened page. Opens the next page, when you have returned to a previous page.
Window V iew Functions Note If you have set up the Aero function, you can use the window view functions. If you want to use the Aero function, click Start > Control Panel > Appearance and Personalization > Window Color and Appearance . Select Window Aero from the color schemes and click OK.
Control Panel T ools for configuring Windows are located in the Control Panel. Opening the Control Panel Click Start ( ) > Control Panel . System and Maintenance Using this function, you can configure Windows performance options.
User Accounts and Family Safety Y ou can change the user account settings, passwords and configure the Parental Controls function. Appearance and Personalize Using this function, you can configure the Desktop style, theme or screen saver settings.
User Accounts Using Windows Vista User Accounts, more than one user can easily share the same PC. The procedures to add and delete a user account and to switch users are described below . Adding User Accounts 1 Click Start ( ) > Control Panel> User Accounts and Family Safety .
Removing User Accounts Note ■ If there is only one administrator account for the computer , you cannot delete the administrator account . ■ Y ou can only delete another account when you are logged in as an administrator . 1 Click Start ( ) > Control Panel > User Accounts and Family Safety > User Accounts .
Changing the screen resolution and the color The resolution refers to the number of pixels displayed on the screen. When increasing the resolution, the items on the Desktop become smaller and more items can be displayed on the screen. The higher the color quality , the more colors are displayed on the screen.
Configuring the Start Menu Power Button The Power button on the Start menu ( ) performs various operations depending on the settings. 1 Click Start ( ) > Control Panel > Hardware and Sound > Power Options and then Change Battery Settings . 2 Click on Change Plan Settings in the currently selected power setting.
4 Select a power plan and click the OK button. T ype Description Power Button Image after Setting Change Sleep Sets the computer to enter Sleep mode. The screen and hard disk will be turned off to reduce the power consumption of the overall system.
Phishing Filter Settings 1 Launch Internet Explorer . 2 Select T ools from the menu and click Phishing Filter > Phishing Filter Settings . Phishing Filter Phishing is a method used by hackers to illegally collect personal information such as credit card numbers, passwords, other account numbers, etc.
86 3 The Internet Options window opens. Locate the Phishing Filter item in the Settings field. Select T urn on automatic website checking and click the OK button to use the Phishing Filter . 4 T o not use the Phishing Filter , select T urn off automatic website checking in the Settings field in Step 3 above.
User control function Using this function, you can control the content your children can access. Y ou can determine for how long they can use the computer and the content they can access.
Using Activity Report Y ou can view and evaluate your children’s internet access through the Activity Report. 1 Open the User Controls window referring to the descriptions of Parental Controls . 2 Set Activity Reporting to On . 3 T o view the Activity Report, click on View Activity Report on the right of the User Controls window .
Using Windows Mobile Center , you can easily configure computer settings such as the volume, the wireless network connection settings, the display settings, etc. all at the same time. Note Some functions may not be supported depending on the Windows Vista version.
Chapter 4. Using the Network Wired Network 91 Wireless Network 9 4 Connecting to a Wireless LAN 95 Using the Easy Network Manager 96 Network Settings 96 Using in Another Location 9 8 Diagnosing the Ne.
91 1 Connect a LAN cable to the computer ’ s LAN port. 2 Click Start > Control Panel > Network and Internet > Network and Sharing Center . 3 Click Manage Network Connections from the left pane. 4 Right-click over the Local Area Connection and select Properties .
92 5 Select Internet Protocol V ersion 4 (TCP/IPv4) from the Networking tab and click Properties . Note ■ The LAN device driver may differ depending on your LAN device model. ■ T o add a network component, click Install in the screen shown in the figure above.
93 Using both DHCP and a fi xed IP simultaneously Using the Alternate Configuration providing by Windows Vista, you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet.
94 Wireless Network A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Before Y ou Start! ■ The descriptions below are for computer models with a Wireless LAN card or device.
95 Connecting to a Wireless LAN If there is an AP , you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows Vista. 1 Right-click over the Network Connections ( ) icon on the taskbar and click Connect to the Network .
96 Using the Easy Network Manager Easy Network Manager is a program that helps configure the network settings. Easy Network Manager provides the following features.
97 5 Select Internet Direct Connection and click the Next button. 6 Select the LAN device, setup the IP address and click the Next button. 7 Click Add Printer and set up a printer according to the wizard. When the printer has been added, click the Refresh button, select the newly added printer and then click the Finish button.
98 Using in Another Location By configuring the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network in one click, without performing the network setting procedures regardless of your location.
99 Diagnosing the Network Status Y ou can diagnose the network state and find solutions for why you cannot connect to the network. 1 Launch Easy Network Manager . 2 Select Management > Diagnose Status from the menu. 3 The Network Connections window appears.
100 1 Connect the phone cable to the Modem port. T ake care to not connect a digital phone line to the modem port. 2 Connect to the Internet according to the instructions of your Internet service provider (ISP). Note If the Internet connection is terminated abnormally , the connection is not released and the corresponding cost can be accrued.
101 File T ransmission Y ou can exchange files between two Bluetooth devices. Y ou can exchange files with another Bluetooth device such as another computer , cell phone, PDA, etc.
102 Using Bluetooth The procedures to exchange files between computers supporting Bluetooth and to use other Bluetooth devices are described below . Using Bluetooth Devices (Connecting Headset supporting Bluetooth) As an example, the procedures to connect to a headset supporting Bluetooth will be described below .
103 5 Enter the PIN in the device PIN field and click the Next button. Note For pairing, a PIN is required. Since a PIN is provided by the headset manufacturer , refer to the corresponding manual. 6 If the Completing the Add Bluetooth Device Wizard window appears, click Finish .
104 3 Select a Bluetooth device to send the file from and click the OK button. 4 Enter a PIN in the Bluetooth PIN Code field and click the Next button. Note The Bluetooth PIN Code is a password used for connecting two Bluetooth devices. The user just enters the same PIN Code (E.
Chapter 5. Using Applications Introducing Programs 106 CyberLink PowerDVD (Optional) 10 9 Samsung Update Plus (Optional) 1 1 1 Play A VStation (Optional) 1 1 3 Launching and Screen Layouts 1 13 Movie .
106 Introducing Programs Using the software supplied with the Samsung computer , you can easily use functions and troubleshoot problems. T ry to use the software after learning about the basic use of the software. For detailed information, refer to the help section of the corresponding software.
107 Multi Media Functions CyberLink PowerDVD ( ) (Optional) T o use this program, you have to install the program manually using the additionally supplied System Software Media (or other CD).
108 T roubleshooting Functions SAMSUNG Magic Doctor ( ) (Optional) SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis, and restoring the system. The system diagnosis function enables users to diagnose system problems without assistance from others.
109 1 Insert a DVD title into the DVD drive. 2 Select PowerDVD and click the OK button. After a moment, the DVD title will play . 3 If the DVD title is not automatically played, click Start > All Programs > CyberLink DVD Suite > Power DVD > CyberLink PowerDVD .
1 10 Note ■ Detailed Usage For more detailed usage, click Start > All Programs > Cyberlink DVD Suite > Power DVD > PowerDVD Help . ■ DVD Region Code A DVD title has a region code according to the international specifications so that it can be played only in that specific region.
1 1 1 Samsung Update Plus (Optional) Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the latest version. Before Y ou Start! ■ T o search for updates and update your computer using Samsung Update Plus, your computer must be connected to the Internet.
1 12 3 If there are available software or driver updates for your computer , the available updates will be listed. Select the required updates from the list and click on Install Updates to start the update. Caution Updates that must be installed separately .
1 13 T o launch the program, click Start > All Programs > Samsung > Play A VStation . Alternatively , double-click the Play A VStation icon( )on the Desktop. Movie Y ou can play a video (movie) file or a DVD/VCD title. Music Y ou can play a music file or an audio CD.
1 14 Note ● What is EDI (Enhanced Digital Image)? EDI (Enhanced Digital Image) is visual quality enhancement technology developed by Samsung Electronics. Y ou can view clearer and sharper images by enabling the EDI function when watching TV or playing a movie on Play A VStation.
1 15 Playing a Movie File The procedures to play a movie file registered to the MOVIE Library are described below . For the procedures to register files to the Library , refer to p. 1 16. 1 Move to Movie Station and double-click All V ideo in the left menu pane.
1 16 Adding Videos to the Library The Movie Library is a library with movie files to be used by Movie Station. The procedures to add movie files saved on the computer to the Library are described below . Y ou can add files or folders. As an example, the procedures to add folders are described below .
1 17 Highlight / Chapter Function Using the Highlight function, you can watch a highlighted part of a movie such as a sports or news item, etc. Using the Chapter function, you can create chapters for a movie and play the movie from any of the chapters.
1 18 Music Station Launch Play A VStation and click Music on the Station Bar . Playlist Window Music Search V olume Control Music Library Music T ype Repeat Setting Random Play Setting EQ EDS Play Con.
1 19 Playing an Audio CD The procedures to play an audio CD are described below . 1 Insert an audio CD into the CD drive. 2 If the AutoPlay window appears, select Play audio CD using Samsung PLA Y A VStation .
120 Playing a Music File If a music file is registered to the Music Library , you can easily play the music file. For the procedures to register tracks to the Library , refer to p. 121. 1 Move to Music Station and double-click on All Music . 2 Double-click a music file.
121 Adding Music Files to the Library The Music Library is a library with music files used by Music Station. The procedures to add music files saved on the computer to the Library are described below . Y ou can add files, folders. As an example, the procedures to add a folder are described below .
122 Launch Play A VStation and click on Photo on the Station Bar . Photo Station Photo Library Photo List and Thumbnail Window Batch Edit Button SlideShow Button View and Edit Button.
123 Viewing an Image The procedures to view images registered to the Photo Library individually and via a SlideShow are described below . For the procedures to register image files to the Library , refer to p. 125. 1 Move to Photo Station and double-click on All Images .
124 Editing an Image Y ou can change the shape of an image, edit an image or apply special effects to an image. The image editing functions are described below . 1 Move to Photo Station and double-click on All Images . 2 Click on a folder which includes images, and the images in the folder are displayed.
125 Adding Images to the Library The Photo Library is a library with image files to be used by Photo Station. The procedures to add image files saved on the computer to the Library are described below . Y ou can add files, add folders. As an example, the procedures to add folders are described below .
126 A VStation Now (Optional) Using A VStation Now , you can easily and quickly play music, photographs, movies and DVDs when the computer is on/off. Start Regardless of whether the computer is on or off, you can launch A VStation Now ( ) by pressing either the A V Now button or the A VS button on the remote control.
Chapter 6. Settings and Upgrade LCD Brightness Control 128 BIOS Setup 129 Entering the BIOS Setup 129 The BIOS Setup Screen 13 1 Setting a Boot Password 133 Changing the Boot Priority 13 5 Upgrading M.
128 Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the Fn + ( ) key or the Fn + ( ) key . The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the Fn + ( ) key once.
129 1 T urn the computer on. 2 When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS Setup. Entering the BIOS Setup BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs.
130 3 After a moment, the BIOS setup screen appears. The items in the BIOS setup may differ depending on the product. Setup Menu Setup Items Help Help for the selected item appears automatically .
131 The BIOS Setup Screen Menu Description Main Used to change the basic system and environment settings. Advanced Used to configure advanced functions on your computer around devices and chipsets. Security Used to configure security functions, including passwords.
132 System Setup Keys In the Setup, you have to use the keyboard. F1 Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 Press to change the item value. F9 Press to load the default Setup settings. ESC Press to return to a higher level menu or to move to the Exit menu.
133 Setting a Supervisor Password A Supervisor Password is required to turn the computer on or to start the System Setup. When setting a Supervisor Password, users other than a supervisor cannot use the computer . 1 Select the Security menu in the BIOS Setup.
134 Setting a User Password Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. Before configuring a user password, a supervisor password must have been configured.
Boot Device Priority Boot priority order: ▼ IDE CD : xxxxxxxxxxxxxxxxxxx ▼ IDE HDD : SAMSUNG xxxxxxx ▼ USB KEY : Not Installed ▼ USB CDROM : Not Installed ▼ USB FDC : Not Installed ▼ USB H.
136 Upgrading Memory One or more memory modules are installed on the computer . There are 2 memory slots and users can replace the installed memory or add new memory . Before Y ou Start! ■ Replace or install new memory only after shutting the computer down completely .
137 3 Push the memory module down so that it is completely fixed. If the memory does not fit easily , push the memory module down while pulling the memory module latches outward. 4 Close the memory compartment cover and fasten the screw . Note Removing a memory module Pull the memory module latches outward.
138 1 Shutdown the system, close the LCD panel and place the computer upside down on a flat surface. 2 Pull the two battery latches outwards ( ), then remove the battery . 3 T o install the battery again, slide the battery into the system. The battery latches move inwards and fix the battery automatically .
139 T o view on the battery Separate the battery and press the PUSH button inside the battery . The remaining battery charge (%) will be displayed. Note Battery W arning ■ Y ou will hear an alarm when the remaining battery charge reaches below 10%. In this case, connect the AC adapter or turn off the computer and install a fully charged battery .
Extending the Battery Usage T ime 140 Decreasing the LCD Brightness Press the Fn + ( ) keys on the keyboard to decrease the LCD brightness to extend the battery usage time. Using Easy Battery Manager Easy Battery Manager is a power management program that enables using the battery power efficiently .
Samsung Optimized This mode is appropriate for normal conditions. It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power . Multimedia This mode is appropriate for a multimedia environment that requires maximum system performance.
142 Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only , the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display .
143 Using the Security Lock Port Y ou can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to use the computer in a public place. T o use this feature, you have to purchase the Kensington lock additionally .
Chapter 7. W indows Media Center About Package Contents and the Program Guide 145 Connecting and Setting Up Media Center 14 6 Optional Devices 146 Using Media Center 150 Start Screen Layout 150 Pictures + Videos 15 1 Music 15 5 TV + Movies 15 9 Windows Media Center is provided for some versions of Windows V ista only .
145 About the Package Contents The package contents of your Samsung computer may differ depending on the computer model. The Media Center remote control, external-type remote control sensor and TV tuner card are not supplied with your computer and the devices are not required to use Media Center .
146 Connecting and Setting Up Media Center The basic usage of Media Center for Microsoft Windows Vista Home Premium is described below . Before Y ou Start! ■ This manual will describe procedures assuming that you are using Media Center with a mouse.
147 TV T uner Card Using a TV tuner card, you can watch and record TV programs. Some models have built-in TV tuner cards. This manual describes their usage assuming your computer has a built-in TV tuner card.
148 Media Center Setup Connect all necessary devices and setup Media Center . Y ou have to complete the settings to use Media Center . 1 T urn the computer on. 2 Click Start > Windows Media Center or Start > All Programs > Windows Media Center .
149 4 If you have selected Custom Setup, continue with the setup according to the Setup Wizard instructions. If there are no installed TV tuner cards, the TV related setup steps will appear during the Media Center setup. In addition, if the computer is not connected to the Internet, you cannot setup and use the TV Guide (Channel Information).
150 Start Screen Layout Before Y ou Start! If you selected Run Setup Later in the Media Center start screen or did not complete the Setup Wizard, the Setup Wizard screen appears when launching Media Center . If you complete the setup, the Media Center start screen appears.
151 Pictures + Videos: Y ou can view pictures, images and video files. Music: Y ou can listen to music files, audio CDs and the radio. TV + Movies : Y ou can watch and record TV programs and play DVD titles. Online Media: Y ou can access all kinds of multimedia content over the .
152 3 If the Library Setup screen appears, select Add Folder to W atch . 4 Specify the path for the folder according to the instructions on the screen. 5 If the following screen appears, click Finish . Y ou can view the newly added folder in the Picture Library or Video Library .
153 4 If you select a picture, the picture is displayed in full screen. Y ou can view another picture by using the Play Control buttons or the direction buttons on the keyboard. 5 T o view pictures in a SlideShow , click on Play SlideShow . Alternatively , select Pictures + Videos > Play All .
154 Viewing Pictures and V ideos Saved on Removable Media The procedures to view pictures, images and videos saved on removable media in Media Center are described below . 1 Launch Media Center . 2 Insert a removable media with picture, image or video files.
155 In Music of Media Center , you can play music files or audio CDs. In addition, you can rip the tracks of an audio CD onto the computer and play them later individually or by using a playlist. Playing an Audio CD 1 Launch Media Center . 2 Press the Eject button of the CD-ROM drive to open the CD tray and insert an audio CD.
156 4 If the Rip CD window appears, click Y es . 5 Ripping a CD begins by showing rotating CD icon on the right side that indicates ripping a CD is in progress.
157 Using Playlists Y ou can easily create, manage and play a playlist with ripped music albums and music files downloaded from the Internet. 1 Launch Media Center , and select Music > Music Library . 2 Y ou can search for a music file by selecting the album, artist, genre or song at the top.
158 6 Select Save As Playlist , enter a playlist name and select Save . If you have a remote control, you can enter a name using the numeric buttons on the remote control. 7 T o play the saved playlist, select Media Center > Music Library > Playlist , select a playlist and click Play .
159 Before Y ou Start! The TV function is only available when a TV tuner card is installed on your computer . TV + Movies Menus Live TV : Y ou can watch live TV programs. Recorded TV : Y ou can watch recorded TV programs. Guide (TV Broadcast Program Guide - EPG) Y ou can view the TV program guide.
160 Playing a DVD The procedures to watch a DVD title are described below . 1 Launch Media Center . 2 Press the Eject button of the DVD drive to open the tray and insert a DVD title. Note If you insert a DVD title without starting Media Center , the Auto Play selection window appears.
161 Online Media Y ou can access more online content through Online Media. Online Media is a service provided by content providers via the Media Center . Y ou can enjoy all kinds of multimedia content such as movies, news, sports, etc. over the Internet.
Chapter 8. Appendix Using McAfee SecurityCenter (Optional) 163 Using Samsung Magic Doctor (Optional) 16 4 Reinstalling Software 16 6 Q & A 168 Display Related 168 Modem Related 16 9 Wired Network .
163 Using McAfee SecurityCenter (Optional) A computer virus is a program that damages computer files and information saved on a computer . A computer is infected by an already infected file or by another computer over the Internet.
164 Using Samsung Magic Doctor (Optional) Magic Doctor is troubleshooting software provided by Samsung Computer . A user can diagnose system problems via one-click or by selecting diagnostic items. Before Y ou Start! The screens used in this manual may differ from actual screens according to the program version.
165 Viewing My Computer Information Y ou can view detailed information about your computer in Samsung Magic Doctor . Click on the icon in the shape of a monitor at the bottom of the main program screen to view detailed information about the computer .
166 Reinstalling Software Y ou can reinstall software using the System Software Media, when a device driver or computer application is not working properly .
167 Standard Installation If you select this option, programs not currently installed on the computer are listed. Minimum Installation If you select this option, programs are listed that need to be installed on the computer (drivers, Windows updates, etc.
168 Q & A This section provides information on possible problems, solutions and other references for using the system. Q The LCD screen is too dark or too bright. A T urn the LCD backlight on or adjust the LCD brightness. Press Fn + ( ) to turn the LCD backlight on or press Fn + ( ) or Fn + ( ) to adjust the LCD brightness.
169 Q The shortcut icons are not displayed on the screen even if I press the shortcut key . A The shortcut icons only appear when the Easy Display Manager program is installed. Q I have connected a monitor (or projector) to the computer , but the colors on the monitor are abnormally displayed.
170 Q When you are unable to make a call when using a switchboard A In general, the dial tone of a switchboard or a digital phone switching system is not continuous unlike that of a PSTN line. Therefore, the modem may not make a phone call as it misreads the dial tone as a busy tone.
171 Q How can I receive a F AX in Sleep mode (Standby Mode)? A T o receive a F AX when the computer is in Sleep Mode (Standby Mode), the computer must be configured as follows. The F AX program must be configured so that it receives F AXES automatically referring to the F AX program manual.
172 Q I cannot find an AP . A V erify whether the Wireless LAN LED is on. If it is turned off, turn it on by pressing the Wireless LAN On/Off button ( Fn + ). Q The Wireless LAN device is operating properly , but I cannot connect to the Internet or to another computer .
173 A3 Check that the device driver is installed properly . If the driver is not properly installed, you will find a yellow exclamation mark on the network icon by clicking Start > Control Panel > System and Maintenance > Device Manager > Network Adapter .
174 A2 V erify whether the same network key (encryption key) has been entered for both the AP and the computer . The network key is an encryption key for encrypting the data transmitted between the AP and the computer . It is recommended setting the network key manually .
175 Q When connecting to a computer-to-computer (Ad Hoc) network, I cannot connect to another computer on the same computer-to-computer network. A1 Make sure that the security settings and network name of the computer-to-computer (Ad Hoc) network are correct.
176 Q The Korean or Chinese characters in a business card received via Bluetooth are broken A1 If you send a business card including Korean or Chinese characters by selecting a Select a business card in the file (*.vcf, *.vcd) option, the characters on the received card will be broken.
177 Q When no headset is found or cannot be connected A1 If the headset is already connected to another device, you will not be able to find the headset and cannot connect to the headset even if the headset is found. Disconnect the connection to the other device and then start the search again.
178 A2 If your head set is a stereo headset , you have to check if the headset is connected as a stereo headset. T o resolve the problem, complete the procedures below .
179 Q Can I watch full-HD grade video files? A Y es. Q Can I burn a HD DVD disk using a general CD-RW or DVD-RW drive? A A general CD-R W or DVD-R W drive does not support burning the HD DVD format.
180 Q Can I burn a Blu-ray disk using a general CD-RW or DVD-RW drive? A A general CD-R W or DVD-R W drive does not support burning the Blu-ray format. Q Can I burn a Blu-ray disk using the CyberLink DVD Solution (CDS)? A Although the CyberLink DVD Solution supports burning the CD and DVD formats, it does not support burning the Blu-ray format.
181 About Intel Media Sharing Software (Only for some models) Intel Media Sharing Software enables users to access, download and play all kinds of media files such as music, video, image and picture files in the home network environment. Intel Media Sharing Software runs on Intel CPU installed Intel Centrino mobile PCs only .
182 Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalog.
183 Wireless LAN Specifications (802.1 1ABG Card) Intel(R) PRO/Wireless 3945ABG Network Connection Device The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Physical Specifications Dimensions 30.
184 Radio Specifications RF Band 2.4GHz, 5GHz Supported Channels Channels allowed per country . Device T ransceiver Standard Output Power 5mW Modulation Scheme 1 1a mode : OFDM 1 1b mode : DSSS 1 1g mode : OFDM Data Rate (Mbps)* 1 1a mode** : 54, 48, 36, 24, 18, 12, 9, 6 1 1b mode : 1 1, 5.
185 Wireless LAN Specifications (802.1 1ABG/N Card) Intel(R) PRO/Wireless 4965 AGN Network Connection Device The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Physical Specifications Dimensions 30.
186 Radio Specifications RF Band 2.4GHz, 5GHz Supported Channels Channels allowed per country . Device T ransceiver Modulation Scheme 1 1a mode : OFDM 1 1b mode : DSSS 1 1g mode : OFDM 1 1n mode : MIMO Data Rate (Mbps)* 1 1a mode** : 54,48,36 ,24,18,12,9,6 1 1b mode : 1 1, 5.
187 Registered T rademarks Samsung is a registered trademark of Samsung Co., Ltd. SENS is a registered trademark of Samsung Electronics Co., Ltd. Intel, Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation.
188 Glossary The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup A way to save the current data to restore it later if necessary . A backup is a way to restore computer data when the data or computer is damaged.
189 Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off.
190 Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click. Y ou can add any icon to the quick launch area of the T askbar and launch frequently used program by clicking that icon.
191 USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.
192 Index A A VStation Now 126 B Battery 138 Battery Calibration 142 BIOS Setup 129 Bluetooth 101 Booting Priority 135 C CD Drive / Recording 50 Charge 139 Click 45 Connecting AP / AP 94 Connect / Out.
193 Contact SAMSUNG WORLD WIDE [U.S.A. / U.K. / AUSTRALIA / HONG KONG / MALA YSIA / SINGAPORE] Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center . Customer Care Center TEL W eb Site U.
194 [IT AL Y] Contatta SAMSUNG Se hai commenti o richieste sui prodotti Samsung contatta il nostro Servizio Clienti. Customer Care Center TEL W eb Site IT AL Y 199 153 153 www .samsung.com/it/ [RUSSIA / UKRAINE] Customer Care Center TEL W eb Site RUSSIA 8-800-200-0400 www .
An important point after buying a device Samsung X65 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung X65 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung X65 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung X65 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung X65 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung X65, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung X65.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung X65. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung X65 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
