Instruction/ maintenance manual of the product K-600HW Avanti
Go to page of 8
Avanti Security control panels 8 fully programmable Zones + PA and Tamper External lighting facility to control up to 2000 watts of external security lighting 3 part set programs .
1.8 Test & Commission. After the wiring has been completed re-connect the battery to the terminals marked Batt + - The panel will now go into alarm condition, enter user code ( 0123 ) to silence, the Tamper and Pow er will be lit and Day & Zone LED’s flashing.
3 Operation 3.1 Programs The Avanti provides the facility for up to 3 pr ograms that can be selected by entering the A , B or * keys after entering the user code when setting the system. The * program is used for Full Set. If no prog ram is selected when setting the system the Avanti will default to Program * .
4 Engineer Programming Once the engineers access code ( 9999 ) has been entered from within DAY mode, the Day LED will be extinguished , and all 8 Zone LED’s will flas h to prompt for the selecti on of the menu setting to be changed. The following is a list of configurable menus availab le within the engineers menu.
4.2 Setting Up Zone Attributes. Set-up Zone Attributes menu is entered from the Engineers menu, by pressing Key 2 . Each of the zones has 9 Attributes that dictate its function, that are fixed rega rdless of what the program set-up has. On entering the set-up Zone Attributes menu, the Day LED will flash, along with all 8 zone LED’s.
4.9 Test Menu. The Test Menu is entered from the Engineers menu by pressing Key 9 . The alarm panel has several test modes making life a little easier fo r the installation engineer. They are as follows: • Press 1 to switch bell drive on. • Press 2 to switch strobe drive on.
5.1 Communicator Test Menu It is imperative that the system is fully tested before connecting to a communicator or STU and that the Alarm Receiving Centre (ARC) is receiving signals correctly. The Communicator Test menu is entered from the Engineers menu by pressing Key 9 (Test Menu) and then Key 4 .
Due to continuous product development, we reserve the right, without prior notice, to alter specifications as and when required. Tel: +44 (0) 1305 853 090 Fax: +44 (0) 1305 851 660 e-mail: sales@keystone-electronics.
An important point after buying a device Avanti K-600HW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avanti K-600HW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avanti K-600HW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avanti K-600HW you will learn all the available features of the product, as well as information on its operation. The information that you get Avanti K-600HW will certainly help you make a decision on the purchase.
If you already are a holder of Avanti K-600HW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avanti K-600HW.
However, one of the most important roles played by the user manual is to help in solving problems with Avanti K-600HW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avanti K-600HW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
