Instruction/ maintenance manual of the product ST54T6 ST62T6 Samsung
Go to page of 59
Owner’ s Instructions PROJECTION TELEVISION .........................................................................................................
W arning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside.
S AFETY 1 Thank Y ou for Choosing Samsung Thank you for choosing Samsung! Y our new Samsung Projection TV r epresents the latest in television technology . W e designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class.
• Protect the power cor d. Power supply cords should be r outed so that they won’ t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con- venience receptacles, and the point where they exit fr om the unit.
S AFETY 3 Important Warranty Information Regarding T elevision Format V iewing Standard scr een format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving.
C ONTENTS 1 C ONTENTS Chapter 1: Y our New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 Familiarizing Y ourself with Y our New TV . . . . . . . . . . . . . .
C ONTENTS 2 C ONTENTS Chapter 3: Operation (Cont.) . . . . . . . . . .3.13 Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.13 Picture Contr ol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 .1 C HAPTER O NE : Y OUR N EW TV List of Features Y our Samsung TV was designed with the latest technology . This TV is a high-performance unit that includes the following special features: • Easy.
C HAPTER O NE : Y OUR N EW TV 1 .2 Familiarizing Y ourself with The TV Front Panel Buttons The buttons on the front panel contr ol your TV ’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the r emote control.
1 .3 C HAPTER O NE : Y OUR N EW TV Y OUR N EW TV Œ PERFECT FOCUS Press to adjust for the optimum picture set in the Factory . ´ VIDEO INPUT jack Use to connect a video signal from a camcorder or a video game. ˇ AUDIO INPUT jacks Use to connect the audio signals from a cam- corder or video game.
C HAPTER O NE : Y OUR N EW TV 1 .4 Y OUR N EW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continu- ously , such as a VCR or a DVD player . Because there are two sets of input jacks, you can connect two dif ferent A/V components (i.
1 .5 C HAPTER O NE : Y OUR N EW TV Y OUR N EW TV Remote Control Y ou can use the remote contr ol up to about 23 feet from the TV . When using the remote, always point it directly at the TV . Y ou can also use your remote contr ol to operate your VCR and cable box.
C HAPTER T WO : I NSTALLA TION 2 .1 Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat T win Leads,” below . If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.
2 .2 C HAPTER T WO : I NSTALLA TION Connecting Cable TV Y ou can connect differ ent cable systems to your TV , including cable without a cable box, and cable with a cable box that descrambles some or all channels.
C HAPTER T WO : I NSTALLA TION 2 .3 I NST ALLA TION Cable with a Cable box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply , “OUT”.
2 .4 C HAPTER T WO : I NSTALLA TION I NST ALLA TION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B – IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A – IN terminal on the RF (A/B) switch.
C HAPTER T WO : I NSTALLA TION 2 .5 I NST ALLA TION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.
2 .6 C HAPTER T WO : I NSTALLA TION I NST ALLA TION Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR. 1 Locate the A/V output jacks on the camcorder .
C HAPTER T WO : I NSTALLA TION 2 .7 I NST ALLA TION Connecting a DVD Player(480i) The rear panel jacks on your TV make it easy to connect a DVD player to your TV . Connecting to Y , P B , P R 1 Connect a set of audio cables between the DVD audio in jacks on the TV and the AUDIO OUT jacks on the DVD player .
2 .8 C HAPTER T WO : I NSTALLA TION ▼ 3 Replace the cover . Remove the batteries and store them in a cool, dry place if you won ’ t be using the remote contr ol for a long time. The remote contr ol can be used up to about 23 feet from the TV . (Assuming typical TV usage, the Batteries last for about one year .
C HAPTER T HREE : TV O PERATION 3 .1 Chapter Three O PERA TION T urning the TV On and Off Press the Power button. Y ou can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, five basic customer settings pr oceed automatical- ly and subsequently: Setting the language, Ant.
3 .2 C HAPTER T HREE : TV O PERATION 4 Make sure that the antenna is connected to the TV . And then press the Left or Right button to activate “Auto Program” or press the MENU button to skip. (refer to “Auto program” on page 3.9) 5 Press the Left or Right button to move to the hour or minute.
C HAPTER T HREE : TV O PERATION 3 .3 Using the Perfect Focus Feature When the picture size is distorted after moving the TV set, use the Perfect Focus feature to adjust for the optimum picture size set in the Factory . 1 Press the Menu button. Press the Down button to select “Function”, then press the ENTER ( ) button.
3 .4 C HAPTER T HREE : TV O PERATION O PERA TION Adjusting Manual Convergence If the color appears spread out or “smeared” on the scr een, the convergence pr obably needs alignment. Be sure to use the remote contr ol for the convergence adjustments.
C HAPTER T HREE : TV O PERATION 3 .5 O PERA TION 4 While “Red” is highlighted, press the ENTER( ) button: A crosshair pattern will appear on the screen. After moving the cursor to the position you want to adjust using the Up/Down/Left/Right buttons on the remote control, adjust Red Convergence by pressing the CH and VOL +/- buttons.
3 .6 C HAPTER T HREE : TV O PERATION O PERA TION Viewing the Display The display identifies the current channel and the status of certain audio-video settings. ▼ The on-screen displays disappear after ten seconds. Viewing the Menus and On-Screen Displays Viewing the Menus ▼ 1 With the power on, press the Menu button .
C HAPTER T HREE : TV O PERATION 3 .7 O PERA TION Selecting a Menu Language 2 Press the Down button to select “Language”, then press the Left or Right button to select the lan- guage. Press the Menu button to exit. 1 Press the Menu button. Press the Down button to select “Function”, then press the ENTER ( ) button.
3 .8 C HAPTER T HREE : TV O PERATION O PERA TION Memorizing the Channels Y our TV can memorize and store all of the available channels for both “of f-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH but- tons to scan through the channels.
C HAPTER T HREE : TV O PERATION 3 .9 3 The TV will begin memorizing all of the avail- able channels. After all the available chan- nels are stored, the Auto program menu reappears.
3 .10 C HAPTER T HREE : TV O PERATION O PERA TION Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press CH or CH , the TV changes channels in sequence. Y ou will see all the chan- nels that the TV has memorized.
C HAPTER T HREE : TV O PERATION 3 .11 O PERA TION Selecting Y our Favorite Channels Y ou can store up to ten of your favorite channels for each available input sour ce (such as TV and CA TV).
3 .12 C HAPTER T HREE : TV O PERATION Adding and Erasing Channels (Manual Method) 1 Press the Menu button. Press the Down button to select “Channel”, then press the ENTER( ) button. 2 Press the Down button to select “Add/Erase”, then press the ENTER( ) button.
C HAPTER T HREE : TV O PERATION 3 .13 O PERA TION Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter , a num- ber , “*”, or a blank.
3 .14 C HAPTER T HREE : TV O PERATION O PERA TION 1 Press the Menu button. The “Picture” icon will be highlighted, then press the Left or Right button repeatedly , until the word “Custom” is selected.
C HAPTER T HREE : TV O PERATION 3 .15 O PERA TION Using Automatic Picture Settings Y our TV has three automatic picture settings (“Dynamic”, “Standar d” and “Movie”) that are preset at the factory . Y ou can activate either Dynamic, Standard or Movie by pressing P .
3 .16 C HAPTER T HREE : TV O PERATION Sound Control Adjusting the V olume O PERA TION Using Mute At any time, you can temporarily cut off the sound using the Mute button. 1 Press the Mute button and the sound cuts off. The word “Mute” will appear in the lower -left corner of the screen.
C HAPTER T HREE : TV O PERATION 3 .17 O PERA TION 2 Press the Left or Right button repeatedly , until the word “Custom” is selected. (When Custom is selected, the words “Equalizer” will appear on the screen.) 3 Press the Down button to select “Equalizer”, then press the ENTER( ) button.
3 .18 C HAPTER T HREE : TV O PERATION Using Automatic Sound Settings Y our TV has four automatic sound settings (“Standard,” “Music,” “Movie,” and “Speech”) that are preset at the factory . Y ou can activate either Standard, Music, Movie or Speech by press- ing the S.
C HAPTER T HREE : TV O PERATION 3 .19 O PERA TION Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV . Also, you can check the time while watching the TV . (Just press Display .) 1 Press the Menu button.
3 .20 C HAPTER T HREE : TV O PERATION O PERA TION Viewing an External Signal Source Use the remote contr ol to switch between viewing signals from connected equipment, such as VCRs and DVD(480i) the TV source (br oadcast or cable). 1 Press the TV/Video button.
C HAPTER F OUR :S PECIAL F EATURES 4 .1 Chapter Four S PECIAL F EA TURES Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Select the appropriate channel. Press the Menu button. Press the Down button to select the “Channel”, then press the ENTER () button.
4 .2 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES Digital Noise Reduction If the broadcast signal r eceived by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the scr een.
C HAPTER F OUR :S PECIAL F EATURES 4 .3 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can impr ove the reception (a low-noise preamplifier boosts the incoming signal). S PECIAL F EA TURES 2 Press the Down button to select “LNA”.
4 .4 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES Changing the Color T one 1 Press the Menu button. The “Picture” icon will be highlighted.
C HAPTER F OUR :S PECIAL F EATURES 4 .5 S PECIAL F EA TURES Using the R.surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start.
4 .6 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES Setting the On/Off T imer 1 Press the Menu button. Press the Down button to select “Function”, then press the ENTER ( ) button. ▼ Before using the timer , you must set the TV’ s clock.
C HAPTER F OUR :S PECIAL F EATURES 4 .7 S PECIAL F EA TURES 5 Press the VOL + button to select “On/Off.” Press the Up or Down button button to turn the on- timer “On.” (Repeatedly pressing the Up or Down button will alternate between on and off.
4 .8 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES • Surround Y our Samsung TV can create a "surr ound" effect such that the sound seems to come from all dir ections. Once the “Surround” is set to “On”, the setting applies to sound effects such as Standar d, Music, Movie and Speech.
C HAPTER F OUR :S PECIAL F EATURES 4 .9 S PECIAL F EA TURES Choosing a Multi-Channel Sound (MTS) T rack Depending on the particular program being br oadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a for eign-language translation.
4 .10 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES ▼ Misspellings and unusual characters sometimes occur dur- ing closed caption transmissions, especially those of live events. There may be a small delay befor e captions appear when you change channels.
C HAPTER F OUR :S PECIAL F EATURES 4 .11 Viewing Picture-in-Picture Y ou can use the PIP feature to simultaneously watch two video sour ces. Note: The PIP feature does not work with Component mode. Activating Picture-in-Picture 1 Press the Menu button.
4 .12 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES 1 Press the Menu button. Press the Down button to select “PIP”, then press the ENTER( ) button. Selecting a Signal Source (Antenna or Cable) for PIP 2 Press the Down button to select “ANT/CA TV .
C HAPTER F OUR :S PECIAL F EATURES 4 .13 1 Press the Menu button. Press the Down button to select “PIP”, then press the ENTER( ) button. Swapping the Contents of the PIP Image and Main Image 2 Pre.
4 .14 C HAPTER F OUR :S PECIAL F EATURES S PECIAL F EA TURES 1 Press the Menu button. Press the Down button to select “PIP”, then press the ENTER( ) button. Changing the PIP Channel 2 Press the Down button to select “Channel,” then press the Left or Right button to change the channel that appears in the PIP window .
C HAPTER F OUR :S PECIAL F EATURES 4 .15 Customizing Y our Remote Control Y our TV comes equipped with a “universal” remote contr ol. In addition to controlling the TV , the universal remote can also operate most VCRs, DVDs and cable boxes (even if your VCR, cable box or DVD are made by manufacturers other than Samsung).
4 .16 C HAPTER F OUR :S PECIAL F EATURES ▼ 4 Enter 3 digits of the cable box code listed below for your brand of cable box . Make sure you enter 3 digits of the code, even if the first digit is a “0.” (If more than one code listed, try the first one.
C HAPTER F OUR :S PECIAL F EATURES 4 .17 S PECIAL F EA TURES Cable Box Codes VCR Codes DVD Codes Note: The r emote contr ol might not be compatible with all DVD Players, VCRs, and Cable boxes.
5 .1 C HAPTER F IVE : T ROUBLESHOOTING If the TV seems to have a problem, first try this list of possible pr oblems and solutions. If none of these troubleshooting tips apply , then call your nearest service center . Identifying Problems Chapter Five T ROUBLESHOOTING Problem Possible Solution Poor picture.
A PPENDIX A .1 Cleaning and Maintaining Y our TV W ith proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV . Placement • Do not place the TV near extremely hot, cold, humid or dusty places.
An important point after buying a device Samsung ST54T6 ST62T6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung ST54T6 ST62T6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung ST54T6 ST62T6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung ST54T6 ST62T6 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung ST54T6 ST62T6 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung ST54T6 ST62T6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung ST54T6 ST62T6.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung ST54T6 ST62T6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung ST54T6 ST62T6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
