Instruction/ maintenance manual of the product SSC-21 Samsung
Go to page of 40
COLOR QUAD OBSER V A TION SYSTEM Installation Manual SSC-21.
1 Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
2 IMPOR T ANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor).
3 9. V entilation : Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the monitor and to protect it from overheating, and these openings should never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface.
16. Servicing : Do not attempt to service this monitor yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
FCC & ICES Information W arning This equipment has been tested and found to comply the limits for a class B digital device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
6 Contents IMPOR T ANT SAFEGUARDS 2 1. System Components and Installation 7 1-1. SYSTEM Components 7 1-2. SYSTEM CONFIGURA TION 8 1-3. Individual Component Installation 9 1-4. Basic System Installation 19 2. Connecting Peripheral Devices 20 2-1. T o connect a PIR Sensor 20 2-2.
7 1. System Components and Installation 1-1. System Components ✳ If you have pur chased only a monitor , you should dir ectly purchase every component except accessories.
1-2. SYSTEM CONFIGURA TION Model Name Quantity Note Monitor SSC-21M 1 Color Quad Monitor Standard Camera SSC-21C 3 Dome Camera SSC-21DC 1 T apping Screw 2 Camera Housing MHG-1 10 1 SCREW 1, SPRING W A.
9 1-3. Individual Component Installation 1) INST ALLING ST ANDARD CAMERA (SSC-21C) SSC-21C' s camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-1 10). • Choose an installation site that can sufficiently support the weight of the equipments to be installed.
10 2) INST ALLING DOME CAMERA (SSC-21DC) • Remove the dome cover from the main body of the camera by turning the cover in a counter clockwise direction with one hand while holding the body with the other .
• Attach the camera to the wall or ceiling using the supplied tap screws. • Adjust the video location by swiveling the camera (PCB board) up and down, and adjust the focus by turning the lens clockwise and counter clockwise. • Put the dome cover back on the camera by rotating the cover clockwise.
12 3) CAMERA MOUNT BRACKET(SBR-1 10) & ST ANDARD CAMERA(SSC-21C) ! Overview CAMERA MOUNT BRACKET (SBR-1 10) is used to attach the camera to a wall, ceiling or shelf. @ Installation Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET .
13 • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position. T ighten the handle, turning it clockwise, and lock the camera in position.
14 4) MOUNTING BRACKET(SBR-120) ! Overview MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall. @ Installation • Choose an installation site that can sufficiently support the weight of the equipments to be installed.
15 5) CAMERA HOUSING(MHG-1 10) ! Overview CAMERA HOUSING (MHG-1 10) is the equipment that protects the indoor camera from the operating environment so that the camera may perform safely .
16 • Loosen two screws from the CAMERA HOUSING PLA TE and detach from HOUSING. • Slide the spring washer and plain washer onto the supplied screw (1/4-20UNF), then install the camera onto the camera housing plate. • Insert one end of the cable to CABLE GROUND (PG-13.
17 • Connect the cable to the camera, then set up CAMERA MOUNTING PLA TE and the camera in the appropriate place inside the HOUSING. • Slide the camera body into the housing body in the direction of arrow , then install the two supplied screws to the rear cap.
• Use the supplied two screws and L-WRENCH to set up the CAMERA HOUSING onto W ALL MOUNT BRACKET . • Use the supplied L-WRENCH to slightly loosen the hexagonal groove SCREW located at the bottom o.
19 1-4. Basic System Installation Perform the following steps to install your system. • T ake the monitor out of the packaging box. • Place the monitor where you would like to install it. Do not turn on power until installation is complete • Choose the place where you want to install the camera.
20 2. Connecting Peripheral Devices 2-1. T o Connect a PIR Sensor - An additional PIR sensor or external sensor can also be connected. - The additional PIR sensor can be connected as shown in the above graphic. - Sensor's trigger signal is NO (Normal Open).
21 3. System Overview The purpose of Samsung Observation system is to provide economical yet on effective surveillance method using more than one video camera.
22 4. Part Names and Functions 4-1. Camera Standard Camera Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor .
Fixed Dome Camera Fixed Focus Lens Fixed-focus that has a lens attached to the camera. Keep the camera free of dust or dirt. PCB Board It is an important part of the camera that carries out the main function. Handle with care. Camera Frame Frame that provides support to the camera.
24 4-2. Monitor Monitor Controls - Front Panel ① Monitor ON/OFF and Alarm Reset MONITOR ON/OFF In the monitor screen OFF mode, the monitor switches to the power save mode outputting only the VCR OUT signal. ✳ When an alarm occurs, while in the power save mode, Monitor screen turns on automatically .
③ MENU Displays the SYSTEM MENU on the screen. The setup is possible in all modes, except when an alarm occurs. ④ LED Indicates the current status of Display Modes, both ZOOM and FREEZE. Freeze : LED flashes in red during the freeze mode. Zoom : LED flashes green in the zoom mode.
26 ⑦ ZOOM Used to switch to the Zoom mode from Single and VCR Modes. ✳ Zoom Feature supports X2 Zoom in capability . ⑧ FREEZE Enables selection or cancellation of Freeze feature in Single Display , VCR, and Zoom Display Modes. In the Freeze mode, it is used to cancel the Freeze feature.
27 Monitor Controls- Back Panel ① AC IN Power input jack. ② CAMERA IN A 6 Pin Modular jack used for video input and camera power input. Pin Configuration of the 6 Pin Connector is as follows.
28 ③ CAMERA OUT CAMERA OUT: This jack means a video output signal of each camera. Y ou can use it when connecting to an external device. ④ VCR IN/OUT VIDEO IN : VCR video input jack. VIDEO OUT : V ideo recording output jack. ⑤ AUDIO IN/OUT AUDIO IN : VCR audio input jack.
29 Menu Setup • Use this to set data for System operation, such as T ime, Date, Alarm, etc. Whenever the MENU key is pressed, the Main Menu will be displayed (except when in the ALARM Mode). Move the cursor to the item to be set, ` ▲ a ` ▼ a then press the ENTER key to display the Sub Menu.
30 4.AUT O SWITCHER Setup • Use this to set Channel Switching time while in the Auto Switcher and PIP modes. • Select the desired channel, ` ▲ a ` ▼ a then use the ` ˇ a ` ˆ a keys to set the Switching time. • Switching time can be between 0 to 30 seconds.
31 6. VIDEO ADJUSTMENT Setup • Use to set up items concerning video signals such as CONTRAST , BRIGHT , etc. • Select the item to change, ` ▲ a ` ▼ a then use the ` ˇ a ` ˆ a keys to change the numerical value. A numerical value can range from 0 to 100.
T erminal Name Signal Level Signal T ype VIH: 4~5V Alarm Reset VIL : 0~0.6V Output T : 400 ms LOW output VIH: 4~5V Alarm Out VIL : 0~0.6V Output T : LOW output during Alarm Hold T ime 32 ALARM/ZOOM/FREEZE Operation 1.
33 2. ZOOM Featur e • The zoom feature (X2 zoom capability) can be used while in the VCR or Single mode. • Press the ZOOM key . A Zoom Area will appear on screen. Use the ` ▲ ▼ ˇˆ a keys to move the Zoom Area to the area which you would like the monitor to zoon in on and then press the ENTER key to view X2 zoom screen.
34 6.T echnical Specifications SSC-21M : Monitor Specifications Model Name SSC-21M Broadcast System Standard NTSC Picture T ube 21 Inch CR T , 0.71mm stripe pitch, 90 ° deflection V isible screen size: 50.
35 SSC-21C : Standard Camera Model Name SSC-21C Broadcast System NTSC ST ANDARD Imaging Device 1/3" SUPER HAD IT CCD Effective Pixels 510(H) ✕ 492(V) Synchronization Internal Resolution H :330 TV Lines, V : 350 TV Lines Signal Output VBS 1.0Vp-p (75ohm composite) S/N Ratio ≤ 50 dB Minimum Object Illumination 2lux (F2.
36 SSC-21DC : Fixed Dome Camera Model Name SSC-21DC Broadcast System NTSC ST ANDARD Imaging Device 1/3" SUPER HAD IT CCD Effective Pixels 510(H) ✕ 492(V) Synchronization Internal Resolution H :330 TV Lines, V : 350 TV Lines Signal Output VBS 1.
Memo 37.
Memo 38.
P art No. : AA68 - 02504A P rinted in Korea Samsung CCTV dba GV1 1621 West Crosby, Suite 104 Carrollton, TX. 75006 PHONE : 866.492.8246.
An important point after buying a device Samsung SSC-21 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SSC-21 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SSC-21 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SSC-21 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SSC-21 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SSC-21, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SSC-21.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SSC-21. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SSC-21 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
