Instruction/ maintenance manual of the product SSC-2000 Samsung
Go to page of 18
System Keyboard SSC-2000 User's Manual GB F D ES I R P.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important litera- ture concerning operation and maintenance has been included with this product.
Contents Chapter 1. General Facts ........................................................gb-3 Introduction ............................................................gb-3 Features ..................................................................gb-3 Name and function of each part .
GB-4 B. Camera movement key - PRESET - P A TTERN - SCAN - AUTO P AN C. Alarm release key D. Joystick controller (UP/DOWN/LEFT/DOWN/AF/ZOOM) The Pan/T ilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/DOWN/LEFT/RIGHT . Press the button on the top of Joystick to control the Auto Focus.
• Be sure to check dangers, which may occur due to damped floor , ungrounded power extension cable, worn power cord or lack of safety grounding. Caution When cleaning this unit, be sure to wipe with a dried cloth.
GB-6 • In case of connecting with Full Duplex - Connect the Txd (+) of Dome Camera RS-485 port with the Rx (+) of SSC-2000. - Connect the Txd (-) of Dome Camera RS-485 port with the Rx (-) of SSC-2000. - Connect the Rxd (+) of Dome Camera RS-485 port with the Tx (+) of SSC-2000.
GB-7 7) Connecting PC based DVR (Applicable to the SPR Smart View V2.3 over) - Connect SSC-2000 through the RS-485 port in the back of PC BASED DVR. - Connect SIGNAL (+) in the RS-485 port of PC BASED DVR with Tx (+) of SSC-2000. - Connect SIGNAL (-) in the RS-485 port of PC BASED DVR with Tx (-) of SSC-2000.
GB-8 Chapter 4. Instructions Log-in 1. T urn on the power of all the components of the system. 2. When the power is applied by connecting the power adapter at the back of system keyboard, the following indication is displayed on the LCD screen.
GB-9 P A TTERN movement This function is to view the camera movement for 30 seconds desig- nated by the user on the pattern mode of the camera menu. Press the pattern button on the keyboard, enter the pattern number(1~3) you want, and press “ENTER” to execute P A TTERN movement.
English small letter input page will appear . Press “TEXT” if you want to enter large letters. Press “NUMBER” if you want to enter numbers. Press “SYMBOL” if you want to enter symbols. Press a word at a time until you complete the title you want.
CAMERA MENU Press the “SETUP” ICON on left below to control the menu of the selected camera. Using the direction key and the enter key , control the CAMERA MENU.
MUX channel selection 1. Press the “CH” ICON below on the MUX screen. 2. A channel selection screen will appear as shown below . 3. Select the channel you want.
ADDRESS SET The address of the system keyboard can be set. Press “ADDRESS SET” and the keyboard address input window will appear as shown below . Enter the address by using the number keys and press the enter key . Press enter the “EXIT” ICON on lower left if you want to clear the window without entering the address.
P ARITY CHECK The P ARITY BIT of RS-232 communication can be set. Press “P ARITY CHECK” and a pop-up window will appear as shown below . Select one among None / Odd / Even. STOP BIT The STOP BIT of RS-232 communication can be set. Press “STOP BIT” and a pop-up window will appear as shown below .
- Operator No. : Newly registered use's number - Password : New password is displayed.( ****** ) - Operator Level : The level of the new user can be set. Operator Level Press “Operator Level” to set the level. Y ou can choose one level among Admin.
UPLOAD progress screen When you press “OK” on the UPLOAD check screen, UPLOAD progress screen will appear as shown below . ‘Complete’ message will appear when uploading is completed. SYSTEM INFORMA TION AND SETUP - S/W V ersion : Present version.
Chapter 7. Product Specification ITEM DESCRIPTION INTERF ACE (RS-485) CONNECTOR TYPE : 4P TERMINAL TYPE POR T : 1 POR T BAUD RA TE : 4,800/9,600/19,200/38,400bps INTERF ACE (RS-232C) CONNECTOR TYPE : D-SUB 9P POR T : 1 POR T BAUD RA TE : 600/1,200/2,400/4,800/ 9,600/19,200/38,400/57,600bps LCD P ANEL 5.
GB-18.
An important point after buying a device Samsung SSC-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SSC-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SSC-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SSC-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SSC-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SSC-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SSC-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SSC-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SSC-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
