Instruction/ maintenance manual of the product SRP-350plus Samsung
Go to page of 35
User's Manual Ethernet Interface Rev . 4.00 SRP-270 SRP-275 SRP-350 SRP-350plus SRP-370 / 372 SRP-770 / 770II SLP-T400 http://www .sams ungminiprinters.
Ethernet V 4. 00 - 2 - ■ T able of c ontent s 1. M an u al I nf or m at io n................................................................................................. 3 2. In t er fa ce ca rd a nd av ail ab l e pr in te r ....................
Ethernet V 4. 00 - 3 - 1. Manual Infor mation The purpose of this manual is to provide information on the operation and usage instructions of the Ethernet Interface for the BIXOLON Printers. 2. Interface card and a vailable printer Printer Interface Card Hardware version 그림 SRP-270 SRP-350 IF A-E TYPE V4.
Ethernet V 4. 00 - 4 - 3. Specifications 3-1. Hardware version Hardware v ersion is marked on the label on t he interface card bracket. Interface V er: V4.X.X has Function key while V er:V3.X.X doesn ’ t have it. IF A-E TYPE IFC-E TYPE [Note] - Th e DIP switch on the interface board should always be OFF .
Ethernet V 4. 00 - 5 - 3-3. Virtual Driv er - It converts output of Serial (COM) port into output of Ethernet (TCP/IP) port. - It is a vailable for W i ndows 2000, XP and 2003 server .
Ethernet V 4. 00 - 6 - 4. How to inst al l 1) Check the interface version [Note] - Each version uses its own Configuration T ool. 2) T u rn of the printer and insert the interface card. 3) Set the baud rate (Serial speed) - SRP-270,275: Max. 19200 bps - SRP-350: Max.
Ethernet V 4. 00 - 7 - 5. St atic IP interface set u p 5-1. Configuration T ool 1) T u rn on the printer . 2) Execute Configure T ool . [Note] - Use proper Configuration T ool dependent on hardware version 3) Click Search .
Ethernet V 4. 00 - 8 - 4) Select MAC Ad dress in Board list and set up Network Setting . [Note] - If many MAC addresses appear , refer t o the MAC address on the labe l of the interface card. - Ask the Network administrator IP and its related information.
Ethernet V 4. 00 - 9 - 5) Enter value at Local Port . [Note] - Default value is 9100 . Choose from 6000 to 10000. 6) Set Inactivity T ime as ‘0’. [Note] - Default value is 0. Choose from 0 to 65535. - W hen you set Inactivity time, Ethernet interface will disco nnect by force a fter designated time.
Ethernet V 4. 00 - 10 - 7) Set baud rate (S peed) at Serial Setting [Note] - The baud rate (S peed) should be same as the baud rate of the printer . (Ref er to [Appendix 1]) - Highest baud rate (S peed) can be used. 8) When setting finishes, click Setting .
Ethernet V 4. 00 - 1 1 - 9) Click Exit to finish set up..
Ethernet V 4. 00 - 12 - 5-2. Web Serv er 1) Execute Internet Explorer . 2) Enter IP address of the printer at Add ress of Internet Explorer and click go . [Note] - If you are not aware of IP address, check IP address by pushing Function key . (Refer to [Appendisx2]) - Ask Network adm inistrator IP Address and it s related information.
Ethernet V 4. 00 - 13 - [Note] - If you are not aware of Subnet Mask, refer to the below . - W he n the IP address is (1) 1~126.xxx.xxx.xxx: Subnet Mask: 255.0.0.0 (2) 128~191.xxx.xxx.xxx: Subnet Mask: 255.255.0.0 (3) 192~223.xxx.xxx.xxx: Subnet Mask: 255.
Ethernet V 4. 00 - 14 - 6) Set baud rate ( Serial speed ). [Note] The baud rate (S peed) should be same as the baud rate of the printer . (Refer t o [Appendix 1]) 7) When setting finishes, click Apply . [Note] W hen the s etting finishes su ccessfully , the following message appears.
Ethernet V 4. 00 - 15 - 8) If you click the message, you can check your configuration setting. [Note] - If any change was not found after setting on Web Server , che ck the bellows; (1) Execute Internet Explorer . (2) Internet Explorer Menu → T ools → I nternet options .
Ethernet V 4. 00 - 16 - (4) Check for newer version of stored p ages → Cli ck Every visit to the p age. (5) Click Refresh in Internet Explorer ..
Ethernet V 4. 00 - 17 - 6. DHCP interface set up 6-1. Configuration T ool 1) T u rn on the printer . 2) Execute Configure T ool . [Note] - Use proper Configuration T ool dependent on hardware version 3) Click Search .
Ethernet V 4. 00 - 18 - 4) Select MAC Ad dress in Board list and check at DHCP Mode . [Note] - If m any M AC addresses a ppear , re fe r t o the M AC address on the label o f the interface card. - Ask the Network administrator IP and its related information.
Ethernet V 4. 00 - 19 - 6) When setting finishes, click Setting . [Note] Successfully finished set up Unsuccessfully finished set up - W he n setting doesn’t fin ish correctly , try again. 7) Wa it approximately 10 or more seconds until the printer receives IP from th e server .
Ethernet V 4. 00 - 20 - 8) Click Search to check given IP . 9) If the given IP is OK, click Exit ..
Ethernet V 4. 00 - 21 - 6-2. Web Serv er 1) Check at DHCP mode and click Apply . 2) Push the Function Key on the interface 10 or more seconds from finishing set up.
Ethernet V 4. 00 - 22 - 7. Firmw are up date 7-1. Configuration T ool 1) T u rn on the printer 2) Execute Configure T ool . [Note] - Use proper Configuration T ool dependent on hardware version 3) Click Search .
Ethernet V 4. 00 - 23 - 4) Select MAC Ad dress in Board . [Note] - If m any MAC addresses appear , refer t o the MAC address on the label of the interface card.
Ethernet V 4. 00 - 24 - [Note] - Check the extension of the file, which should be “ bin ” . Successfully finished F/W update Unsuccessfully finished F/W update - Printe r and available firmware Printer Firmware SRP-770, SRP-770II, SLP-T400 ethernettoserial_v5.
Ethernet V 4. 00 - 25 - 7-2. Web Serv er 1) Click Firmware upd ate . 2) Internet Explorer is executed and it moves to download site automat ically . [Note] Printer and available firmware Printer Firmware SRP-770, SRP-770II, SLP-T400 ethernettoserial_v5.
Ethernet V 4. 00 - 26 - 3) Download Configure_Vx.xx.zip file and * .bin file. [Note] Y ou ca n download it by double-clicking icons or copy and paste. 4) Unzip Conf igure_Vx .xx.zip and execute Configure_Vx.xx.exe at Configure_Vx.xx folder . [Note] - In case Configure_Vx.
Ethernet V 4. 00 - 27 - 8. Ethernet test by using Window s test p age If you don ’ t have any test program to check printer ’ s p erformance, you can use W in dows driver . It is a vailable for W indows 2000, XP and 2003 server . 1) I nstall W indow s driver o f the printer .
Ethernet V 4. 00 - 28 - 4) Select Port s tab. 5) Click Add Port..
Ethernet V 4. 00 - 29 - 6) Select St andard TCP/IP Port and click New port . 7) When standard TCP/IP printer add wizard w indo w pops up, click Next . 8) Enter printer IP at Printer Name or IP A dd ress and click Next . [Note] Enter same IP address a s th e Ethernet interface ca rd.
Ethernet V 4. 00 - 30 - 9) Click Next . [Note] Click Next without any selection nor change. 10) Click Finish . 1 1) Click Close to close Printer port window.
Ethernet V 4. 00 - 31 - 12) Click Configure Port . 13) Enter same p ort number as the value of Lo cal Port of the Ethernet inte rface at Raw Setting . [Note] There is no change except Raw Setting .
Ethernet V 4. 00 - 32 - 14) Click OK . 15) Select General tab and click Print T est Page to check i f t he printer works properly ..
Ethernet V 4. 00 - 33 - [Appendix 1] P rinter DIP s w itch set up Printer Baud rate & DSW set up Handshaking & Parity Baud rate DSW 1-7 DSW 1-8 57600bps OFF ON 38400bps ON ON 19200bps OFF OFF .
Ethernet V 4. 00 - 34 - [Appendix 2] Fu nction Key set up 1. How to use (1) T u rn on the printer (2) W ait 10 or more seconds until the Ethernet interface boots up (3) Push the Function key SRP-770II (4) The settings w ill be p rinted only one time since the printer is turned on.
[Appendix 3] Fa ctory Reset 1. Default setting after factory reset - Activate DHCP mode - Local Port: 9100 - Inactivity T ime: 0 - S peed SRP-770II, SLP-T400: 230400 bps SRP-270 , SRP-275, SRP-350, SRP-350plus, SRP-370, SRP-372: 9600 bps 2.
An important point after buying a device Samsung SRP-350plus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SRP-350plus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SRP-350plus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SRP-350plus you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SRP-350plus will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SRP-350plus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SRP-350plus.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SRP-350plus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SRP-350plus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
