Instruction/ maintenance manual of the product SP43T7 Samsung
Go to page of 56
COLOUR TELEVISION SP42W4/42W5 SP43T6/43T7/ 43T8/43W6 SP 47Q7 /47W1/47W3 SP48T6 SP52Q7 SP54T6/ 54T8 SP55W3 SP62T6/ 62T8 SP65W3 Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
2 Impor tant W arranty Inf ormation Regarding T elevision F ormat V ie wing ENG S tandard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving.
3 S afety Instructions ENG ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids.
4 ENG Contents (continued) ◆ F OREWORD ■ Important Warranty Information Regarding Television Format Viewing ........ 2 ■ Safety Instructions ......................................................................................... 3 ■ Caution .
5 ENG Contents ◆ U SING Y OUR T ELEVISION ■ Setting the External Sound ............................................................................ 32 ■ Selecting the Sound Mode (depending on the model) .................................. 33 ■ Setting the Sleep Timer .
6 ENG Contr ol P anels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model. ( a ) Input Source Selection ( b ) Temporary Sound Switch Off ( c ) M.
7 ENG Contr ol P anels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model. ( a ) Input Source Selection ( b ) Temporary Sound Switch Off ( c ) M.
8 ENG Connection P anels (depending on the model) Auto Convergence Video Input S-Video Input Audio Input Side of the TV Rear of the TV Audio Output 75 Ω Coaxial Connector for Aerial or Cable Network.
9 ENG Using a Displa y Dec k (depending on the model) You can display a VCR or DVD Player, etc. by using the display deck. SP47W3/55W3/65W3 1 Press the symbol “ ” at the center of the display deck. 2 Hold the center of the door and lift it up in the direction of arrow till a ‘ ttok ’ sound sounds.
10 ENG SET DVD Cable VCR TV TV Surround S.STD P .STD S.Mode T ext/Mix Info. Sleep Perfect Focus PIP Scan Swap Locate Still Mute VOL P Menu Video Display P .
11 To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television.
12 ENG The mains lead is attached to the rear of your television. ☛ If you have purchased this television in the United Kingdom, refer to page 53 for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. ➣ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
13 SET DVD Cable VCR TV TV Surround S.STD P .STD S.Mode T ext/Mix Info. Sleep Perfect Focus PIP Scan Swap Locate Still Mute VOL P Menu Video Display P .
14 ENG When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the Power ( ) button on the remote control.
15 If you want to reset this feature... 1 Press the Menu button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Function . Result : The options available in the Function group are displayed. 3 Press the button. 4 Press the ▼ or ▲ button to select Plug & Play .
16 ENG To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the Menu button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Function . Result : The options available in the Function group are displayed.
17 If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. (The Convergence Adjustment can not be made by using the control buttons on the front panel.
18 ENG You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
19 This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the Menu button. Result : The main menu is displayed.
20 ENG You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU button.
21 7 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▼ or ▲ button to select Channel . ◆ Press the ❿ button. ◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable channel). ◆ Press the ❿ button.
22 ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the Menu button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Channel .
23 ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme.
24 T ext/Mix Info. Sleep Perfect Focus PIP Scan Swap Locate Display P .Size ON ENG You can select the type of picture which best corresponds to your viewing requirements. 1 Press the Menu button. Result : The options available in the Picture group are displayed.
25 Your television has several settings which allow you to control picture quality. 1 Press the Menu button. Result : The options available in the Picture group are displayed. 2 Press the button. 3 Press the ▼ or ▲ button to select Adjust . Press the button.
26 ENG ◆ Scan Mode You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. Auto , Natural , Digital and Progressive modes are available.
27 ENG T ext/Mix Info. Sleep Perfect Focus PIP Scan Swap Locate Display P .Size ON You can select the picture size which best corresponds to your viewing requirements by pressing the “ P.Size ” button simply. Depending on the model, the following picture sizes are available: Auto wide Expanding and pulling up the picture from 4:3 to 16:9 ratio.
28 ENG The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Sound . Result : The options available in the Sound group are displayed.
29 Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume .
30 ENG This mode allows you enjoy Dolby Pro Logic Surround effect fully with only surround speakers are connected to TV. This allows various modes for the main, center and rear speakers to be selected.
31 The following Dolby settings can be adjusted to suit your personal preferences. ◆ Volume of the center and rear speakers ◆ Pro Logic delay time for the rear speakers (between 15 and 30 ms) ◆ Activation/deactivation of the test tone to simulate the volume on each speaker 1 Press the Menu button.
32 ENG S et ting the External Sound This feature allows you can adjust to suit your personal preferences when the equipment with output is connected to the television. 1 Press the Menu button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Sound .
33 S electing the S ound Mode (depending on the model) ENG The “ S.Mode ” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “ Dual-I ” or “ Stereo ” , depending on the current transmission.
34 ENG You can set the television ’ s clock so that the current time is displayed by pressing the “ Display ” button. You must also set the time if you wish to use the automatic on or off timers. ➣ When pressing the “ I ” button (On/Off) on the front of the television, the clock setting will be reset.
35 You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➣ The first step is to set the television ’ s clock (refer to “ Setting and Displaying the Current Time ” on the previous page).
36 ENG You can display a sub picture within the main picture of TV program or external A/V devices such as VCR or DVD. I n this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the Menu button.
37 ☛ Easy functions of remote control Buttons Feature PIP ON Used to activate or deactivate the PIP function directly. Scan Used to scan every memorized channel in order. To stop scanning, press it again. Swap Used to interchange the main picture and the sub picture.
38 ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram).
39 You can display Teletext information at any time on your television. ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or P button.
40 ENG S electing Displa y Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the.
41 S electing a T eletext P age ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
42 ENG Connecting to the External Input/Outputs ➢ EXT1 is used for the equipment with an RGB output, such as video game devices or video disc players.
43 ENG Connecting to the RC A Input (depending on the model) ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices.
44 ENG Connecting to the S-V ideo Input (depending on the model) ➢ The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Camcorder VCR ① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
45 ENG Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the VIDEO button repeatedly.
46 ENG Redirecting an Input to the External Output Your television enables you to choose which audio/video signals are output to the external connector. 1 Press the Menu button. Result : The main menu is displayed. 2 Press the ▼ or ▲ button to select Function .
47 P r ogramming the Remote Contr ol f or Other Components ENG This TV ’ s remote control can operate almost any VCR, Cable box, or DVD, in addition to controlling the TV. ➣ The remote control might not be compatible with the TV manufactured by another company.
48 P r ogramming the Remote Contr ol f or Other Components ENG A-Mark Admiral Akai Anam Aoc Bell & Howell Broksonic Candle Centrion Citizen Classic Concerto Contec Coronado Craig Croslex Crown Cur.
49 P r ogramming the Remote Contr ol f or Other Components ENG Admiral Aiwa Akai Audio Dynamics Bell & Howell Broksonic Candle Canon Citizen Colortyme Craig Curtis-Mathes Daewoo DB Dimensia Dynate.
50 P r ogramming the Remote Contr ol f or Other Components ENG Anvision Cable Star DaeHan DaeRyung Dongkuk Eagle Eastern International General Instrument GI Hamlim Hitachi Jerrold LG Macom Magnavox Na.
51 ENG SC ART Connector Wiring (EXT1, EXT2 or EXT3) If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below.
52 T roubleshooting: Before Contacting Service P er sonnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
53 ENG Wiring the Mains P o w er Suppl y Plug (UK Onl y) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
54 Memo ENG.
55 Memo ENG.
ELECTRONICS BP68-00070A-01 (ENG) - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
An important point after buying a device Samsung SP43T7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SP43T7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SP43T7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SP43T7 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SP43T7 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SP43T7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SP43T7.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SP43T7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SP43T7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
