Instruction/ maintenance manual of the product SC4350 Samsung
Go to page of 11
Operating Instructions V ACUUM CLEANER Register your product at www .samsung.com/register ❈ Before operating this unit, please read the instructions carefully .
1 1. Read all instructions carefully . Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner . 2. W ARNING : Do not use the vacuum cleaner when rug or floor is wet.
2 ASSEMBLING THE CLEANER 1 OPTION Features may vary according to model. ▼ CAUTION Please do not press the button of dust bin handle when carrying machine.
3 OPERA TING THE CLEANER 2 1) BODY CONTROL TYPE 2-2 POWER CORD 2) ON/OFF TYPE 2-1 ON/OFF SWITCH 2-3 POWER-CONTROL • SLIDE TO THE STOP POSITION V acuum-cleaner switches off (stand by mode) • SLIDE FORW ARD TO MAX Suction capacity increases smoothly up to maximum.
4 ACCESSOR Y 2-4 HOW TO USE AND MAINT AIN THE ACCESSORIES Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. T o check for blockages, separate the telescopic pipe and adjust to shorten.
5 1 45 6 23 EMPTYING THE DUST BIN 3 Once dust reaches the dust full mark, or sution is noticeably reduced during cleaning, empty the dust bin. Throw away dust into the bin. Close the dust bin cover . Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound.
6 CLEANING THE DUST P ACK 4 NOTE When suction is noticeably reduced continuously , please empty the Dust Pack(4-2) as shown in the following illustration. 4-1. WHEN TO CLEAN THE DUST P ACK T urn the vacuum power to 'MAX' - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below .
7 4-2 CLEANING THE DUST P ACK 12 Remove the dust bin and dust pack as shown. Remove the sponge and filter from the dust pack 34 W ash the sponge and the filter of the dust pack with water . Let the sponge and filter dry in the shade for more than 12 hours.
8 T ake out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner . Shake and tap the dust from it and put back in machine. NOTE : Replacement filters are available at your local Samsung distributor. CLEANING THE MOTOR PROTECTION FIL TER 5 Press the fixed frame part at the back of the main body to remove.
9 PROBLEM CAUSE REMEDY 0 - IF YOU HA VE A PROBLEM Motor does not start. No power supply . Thermal cut-out. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Cord does not rewind fully . Check that the cord is not twisted or wound unevenly .
DJ68-00387N REV(0.7) DJ68-00387N-07 10/13/09 9:58 AM Page 16.
An important point after buying a device Samsung SC4350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SC4350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SC4350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SC4350 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SC4350 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SC4350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SC4350.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SC4350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SC4350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
