Instruction/ maintenance manual of the product SADT-104WM Samsung
Go to page of 12
SADT - 104WM Wall Mount Adaptor imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.
ENG SADT-104WM_ 1 Overview The WALL MOUNT ADAPTOR is used to install the SMARTDOME CAMERA (SCC-C6433/C6435) in an indoor wall. Notice • Make sure that you must select an installation spot to endure the total weight of "Wall Mount Adapter", "Smart Dome Camera".
2 _SADT-104WM 3. If you install the Wall Mount Adaptor in a wall, place the template on the wall and drill 4 holes for the anchor bolts (M10) and nuts (M10) before inserting them. If you install it in a corner of the wall, use the Corner Mount Adaptor (SADT-110CM).
ENG SADT-104WM_ 3 5. Remove the Connectors at the end of the Camera Adaptor. In the next step, peel off the coating of the cable and connect it to the external cable using soldering. (See the wiring diagram of the installation guide for the Camera to connect the cables.
4 _SADT-104WM 6. Prepare the Camera Adaptor for the applicable camera. Refer to the installation guide for the applicable camera and configure the initial settings of the Camera Adaptor.
ENG SADT-104WM_ 5 8. Pull out cables such as external power cable, BNC cable and communications cable through the rear of the Wall Mount Adaptor, which are necessary for connecting the camera. It is recommended to keep the cables about 100mm longer than the cover fixing part.
6 _SADT-104WM 10. Connect the cables of the Camera Adaptor with the outward cables, which then you push in through the Cover Fixing Part to the Wall Mount Adaptor. Insert one piece of the two-strand cable into an empty area of the Wall Mount Adaptor as in the figure below and push the other one into the Wall Mount Adaptor.
ENG SADT-104WM_ 7 12. Prepare the Camera Body. Put up the Safety Wire, attached to the camera, on the Safety Hook. CAUTION To avoid accidental fall and consequent damage to the camera during installation or detachment, make sure the Safety Wire is secured to the hook.
8 _SADT-104WM 13. Align the Guide 1 of the Camera with the Guide 2 of the Camera Adaptor and insert the 3 Guides of the Camera into the corresponding Guide Holes of the Camera Adaptor. Then, turn the camera clockwise by 10 degrees. Make sure that the part "A" is moved from position 1 to 2.
ENG SADT-104WM_ 9 14. Use the screws, attached to the Camera, to firmly fix the Camera body with the Camera Adaptor. (Once you removed the camera from the Camera Adaptor, loosen the screw, turn the camera counterclockwise by about 10 degrees, and then pull it down.
10 _SADT-104WM Product Specification Location for use: Indoors Installation Spot: Wall or Vertical Structure Dimension: See the figure Weight: 241g Material: plastic Operation Temperature: -10˚C ~ 50˚C Accessories Template ........................
Cor rect Disposal of T his Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
An important point after buying a device Samsung SADT-104WM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SADT-104WM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SADT-104WM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SADT-104WM you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SADT-104WM will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SADT-104WM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SADT-104WM.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SADT-104WM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SADT-104WM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
