Instruction/ maintenance manual of the product PS-42P7HD Samsung
Go to page of 70
PDP-TELEVISION (P LASMA D ISPLA Y P ANEL ) Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
English - 2 ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”.
English - 3 n d on Contents ◆ G ENERAL I NFORMA TION ■ User Instructions ................................................................................................... 2 ■ Checking Parts .....................................................
English - 4 Contents ◆ W ISELINK ■ Using the WISE LINK Function ........................................................................................ 28 ■ Using the WISELINK Mode ...............................................................
English - 5 ➢ Press the MENU button once in DTV mode, then the DTV menu is displayed. ➢ The product colour and shape may vary depending on the model. Contr ol P anel (depending on the model) Front (or Side) Panel 1 SOURCE Displays a menu of all of the available input sources (TV , Ext.
English - 6 ➢ The product colour and shape may vary depending on the model. Connection P anel (depending on the model) Side Panel or continued... 1 2 1 S-VIDEO or VIDEO / AUDIO L/R -V ideo (S-Video or V ideo) and audio inputs for external devices, such as a camcorder or VCR.
English - 7 ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. ☛ When connecting an external device, match the colour of the connection terminal to the cable.
English - 8 ➢ The performance of the remote control may be affected by bright light. ➢ This is a special remote control for the visually impaired persons, and has Braille points.
English - 9 Installing Bat teries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
English - 10 F reezing the Current Picture Y ou can freeze the picture when watching a television programme simply by pressing the STILL button. T o return to normal viewing, press it again. ➢ This function will automatically cancel five minutes later .
English - 11 Plug & Pla y F eature 1 If the television is in standby mode, press the POWER () button on the remote control. The message to start Plug & Play is displayed. 2 The Language menu will automatically appear after several seconds. 3 Select the appropriate language by pressing the … or † button.
English - 12 Vi e wing an External Signal S ources 1 Press the MENU () button to display the menu. 2 Press the ENTER/OK () button to select Source List . 3 Press the ENTER/OK () button again. 4 Press the … or † button to select the signal source, then press the ENTER/OK () button.
English - 13 Storing Channels A utomatically 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER/OK () button. 3 Press the ENTER/OK () button again. The available countries are listed.
English - 14 Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: ◆ Whether or not to store each of the channels found. ◆ The programme number of each stored channel which you wish to identify .
English - 15 Channel Manager Move Enter Return Channel Manager Child Lock : Off TV 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER/OK () button. 3 Press the … or † button to select Channel Manager , then press the ENTER/OK () button.
English - 16 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER/OK () button. 3 Press the … or † button to select Name , then press the ENTER/OK () button. 4 Press the … or † button to select the channel to be assigned to a new name, then press the ENTER/OK () button.
English - 17 Fine T uning Channel Reception 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER/OK () button. 3 Press the … or † button to select Fine Tune , then press the ENTER/OK () button.
English - 18 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER/OK () button. 3 Press the ENTER/OK () button twice. 4 Select the required mode by pressing the … or † button, then press the ENTER/OK () button.
English - 19 S electing the Picture Size 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER/OK () button. 3 Press the … or † button to select Size , then press the ENTER/OK () button.
English - 20 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER/OK () button. 3 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 21 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER/OK () button. 3 P ress the … or † button to select PIP , then press the ENTER/OK () button. 4 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 22 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Sound , then press the ENTER/OK () button. 3 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 23 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER/OK () button. 3 Press the … or † button to select Time , then press the ENTER/OK () button. 4 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 24 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER/OK () button. 3 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 25 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER/OK () button. 3 Press the … or † button to select Screen Burn Protection , then press the ENTER/OK () button. 4 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 26 The Windows display-settings for a typical computer are shown below . But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases.
English - 27 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER/OK () button. 3 Press the … or † button to select PC , then press the ENTER/OK () button. 4 Select the required option by pressing the … or † button, then press the ENTER/OK () button.
English - 28 ◆ Do not apply excessive force when you insert/eject the memory card or USB device. ◆ Do not place the memory card or USB device near a strong electro-magnetic device. ◆ Do not allow metal substances to come in contact with the terminals on the memory card.
English - 29 1 Press the MENU () button to display the menu. Press the ENTER/OK () button to select Input . Press the … or † button to select WISELINK , then press the ENTER/OK () button. 2 Press the … or † button to select a corresponding memory device, then press the ENTER/OK () button.
English - 30 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button. JPEG files and existing folders are displayed. 3 Press the … / † / œ / √ buttons to select a file, then press the ENTER/OK () button.
English - 31 ) n o . e o e e K Using the Photo (JPEG) List continued... ◆ Slide Show: Starts a slide show . (Refer to “Viewing a Slide Show” on page 32) ◆ Rotate: Y ou can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state).
English - 32 V iewing a Slide Show 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button. JPEG files and existing folders are displayed.
English - 33 Using the Menu during a Slide Show ◆ Speed: Select to control the slide show speed. Each time the ENTER/OK () button is pressed, the speed changes repeatedly . ( Normal Slow Fast ) ◆ Background Music: Select to choose whether you want to play MP3 file during a slide show .
English - 34 Using the Photo (JPEG) List Rotating 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button. JPEG files and existing folders are displayed.
English - 35 Using the Photo (JPEG) List Zooming-In 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button. JPEG files and existing folders are displayed.
English - 36 Y ou can copy files between different memory devices installed. 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button.
English - 37 n e e K 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button. The corresponding files and existing folders are displayed.
English - 38 T o Print a Photo Image Move Enter Return Exit Slide Show Rotate Zoom Copy Delete Print List 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER/OK () button.
English - 39 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Music , then press the ENTER/OK () button. MP3 files and existing folders are displayed. 3 Press the … or † buttons to select a file to be played, then press the ENTER/OK () button.
English - 40 Y ou can copy files between different memory devices installed. 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Music , then press the ENTER/OK () button.
English - 41 s , n e e K 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Music , then press the ENTER/OK () button. The corresponding files and existing folders are displayed.
English - 42 Setup displays the user settings of the WISELINK menu 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Setup , then press the ENTER/OK () button.
English - 43 ◆ Music Repeat: On : Plays back a music file or all music files repeatedly . Off : Doesn’t play back repeatedly . ◆ Background Music: Select to determine whether to play an MP3 file during a slide show . Y ou can select Music On or Music Off .
English - 44 Pr e vie wing the DTV Menu System (depending on the model) Guide Move Enter Exit Now & Next Guide Full Guide Scheduled List Default Guide : Full Guide Preference Move .
English - 45 Updating the Channel Manager Automaticall y Y ou can update the channel manager when the broadcaster adds new Services or if you move the TV to a new location. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel .
English - 46 Editing Y our F a v ourite Channels Channel Move Enter Return Auto Store Manual Store Edit Favourite Channels Channel Manager Edit Favourite Channels Move Select Return ▲ 2 BBC TWO 5 Five 7 BBC THREE 15 abc1 16 QVC ▼ ➢ In the case of DTV mode, OK or Select can be used as the ENTER/OK () button.
English - 47 Edit Favourite Channels Move Return 2 BBC TWO ★ 7 BBC THREE ★ 15 abc1 ★ Add Drop Preview Delete Edit Favourite Channels Move Return 2 BBC TWO ★ 7 BBC THREE ★ 15 abc1 ★ Add Mov.
English - 48 Vi e wing Channel Manager Channel Move Enter Return Auto Store Manual Store Edit Favourite Channels Channel Manager 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Channel .
English - 49 Vi e wing the EPG (Electr onic Pr ogramme Guide) Information ◆ Now & Next Guide For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information. ◆ Full Guide Displays the programme information as time ordered One hour segments.
English - 50 Using the S c heduled List If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program. 1 Press the D.
English - 51 Se t ting the Default Guide Y ou can preset the default guide style. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the ENTER/OK () button to select Guide . 3 Press the ▲ or ▼ button to select Default Guide . Press the ENTER/OK () button.
English - 52 A djusting the T ranslucency Le vel 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Preference . Result : The Preference menu is displayed. 3 Press the ENTER/OK () button. 4 Press the ▲ or ▼ button to select Translucency Level .
English - 53 Se t ting up the P arental Loc k 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select Preference . Result : The Preference menu is displayed. 3 Press the ENTER/OK () button. 4 Press the … or † button to select Parental Lock .
English - 54 Using the P referred F eatures ◆ Activating/deactivating the subtitle ◆ Changing the default value for subtitle and audio languages 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the ▲ or ▼ button to select Feature .
English - 55 Chec king the Signal Information Y ou can get information about the signal status. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select System . Result : The System menu is displayed. 3 Press the ENTER/OK () button.
English - 56 Vi e wing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1 Press the D.MENU button. Result : The DTV menu is displayed. 2 Press the … or † button to select System . Result : The System menu is displayed.
English - 57 System Move Enter Return Product Information Signal Information Software Upgrade Common Interface Reset Reset Enter PIN Return Enter PIN Reset Return WARNING: All channel settings and user preferences will be lost and returned to the factory defaults.
English - 58 T elete xt F eature (depending on the model) Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 59 continued... The teletext pages are organized according to six categories: Part Contents A Selected page number . B Broadcasting channel identity . C Current page number or search indications. D Date and time. ET ext. F Status information.
English - 60 Instructions on Securing the SET to the W all Mount Bracket ➢ The exterior of the SET may be dif ferent than the picture. (Assembly and installation of the plastic hanger is the same.) 1 Remove the screws from the back of the PDP . 2 Use the screw and assemble the plastic hanger .
English - 61 Ho w to Install the Wall Mount Brac k et Connecting External Devices to the PDP ➢ To connect external devices such as a DVD or a Home Theater System to the PDP , please refer to following instructions: 1 Be sure to remove the safety pins underneath the PDP .
English - 62 Se t ting Up Y our Remote Contr ol Setting Up the Remote to Operate Y our VCR 1 T urn off your VCR. 2 Press the VCR button on your TV’ s remote control.
English - 63 Se t ting Up Y our Remote Contr ol Setting Up the Remote to Operate Y our DVD 1 T urn off your DVD. 2 Press the DVD button on your TV’ s remote control.
English - 64 Remote Control Codes VCR Brand SAMSUNG ADMIRAL AIW A AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTRO.
English - 65 Se t ting Up Y our Remote Contr ol continued... CABLE BOX Brand SAMSUNG GI HAMLIN HIT ACHI JERROLD MACOM MAGNA VOX OAK P ANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 00.
English - 66 Se t ting Up Y our Remote Contr ol SAMSUNG DVD Product DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO Code 000 001 002 003 004 005 006 007 008 009 010 011 012 013 Product Home Theater .
English - 67 Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of the television and contact your local dealer . No sound or picture ◆ Check that the mains lead has been connected to a wall socket.
This page is intentionally left blank. BN68-00889Q-01Eng(UK) 8/28/06 11:23 AM Page 68.
Correct Disposal of This P r oduct ( W aste E lectrical & E lectronic E quipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
BN68-0 0889Q-0 1 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to S amsung products, please contact the SAMSUNG customer care centre. Country BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY IT ALIA LUXEMBURG NETHERLANDS NORW A Y POLAND PORTUGAL RUSSIA SLOV AKIA SP AIN SWEDEN U.
An important point after buying a device Samsung PS-42P7HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung PS-42P7HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung PS-42P7HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung PS-42P7HD you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung PS-42P7HD will certainly help you make a decision on the purchase.
If you already are a holder of Samsung PS-42P7HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung PS-42P7HD.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung PS-42P7HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung PS-42P7HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
