Instruction/ maintenance manual of the product Two-Way Led Transmission Remote Starter Autostart
Go to page of 14
DOC: 1.00 (i) – August 29, 2006 DL Lp Manufactured in Canada by Autostart TWO-WAY LED MANUA L TRANSMISSION REMOTE STA RTER User Guide WARNING It is the responsibility of the vehicle operator to ensure their vehicle is parked in a safe an d responsible manner.
User Guide P. 2 Table of Contents Introduction ............................................. 2 Using the Remote Control ...................... 3 Vehicle Presets ....................................... 3 Heater & Heated Se at ......................
User Guide P. 3 Using the Remote Control Your remote starter is equi pped with a 5-button mu lti-channel remote c ontrol. It can oper ate two independent v ehicles equi pped with a r emote starter (see Multi-car operation section on page 10).
P. 4 User Guide of vehicles coul d cause them to rem ain ON even after remot e starter shut down, res ulting in a dea d battery. Arming the Starter Kill The Starter Kill (i f installed) can be confi gured by the i nstaller so as to arm auto matically (P assive Mode) or not to ar m automatica lly (Active Mod e).
User Guide P. 5 Remote-starting Press the START/STOP button for approx . 1 second. The p arking lights will come ON to inform you that the Remote Car Starter has rec eived your signal . Approximately 5 seconds later, the engin e will start. The parking lights will rema in ON during the pr e-programmed run time of the e ngine.
P. 6 User Guide successively i nto the IGNITION ON / RUN and OFF position s. • The parking lights will flash three times to indic ate that the vehicle is now in Valet Mo de. The L.E.D. will come ON solid once the ignition key is remo ved. To take the system o u t o f Valet Mode: • Insert the ignition key into t he ignition sw itch.
User Guide P. 7 • Press the brake p edal. • Press the SHIFT button then pr ess and hold the START/STOP button for 3 s ec. (the parking lights will flash once) .
P. 8 User Guide Priority Door Access If the Remote Door Lo cks option is insta lled on your vehicle, this safety featu re allows you un l ock solely the driver’s door with a single pres s of the UNLOCK butto n on the transmit ter; upon a second press of the UNLOCK button, all the ot her doors will u nlock.
User Guide P. 9 • Turn the ignition k ey to the IGNITION ON (RUN) position. • Within 3 sec., pres s and release th e valet button , the parking lig hts will flash twic e the L.E.D. will turn itself off. Note : Once Valet Mode is ac tivated, the r emote starter will be disabled .
P. 10 User Guide • Flashing LED ON : the L.E.D. will fl ash at all times (eit her under active armin g or under passiv e arming) to indicat e that the start er kill is activ e. • Active Arming: the LED will flas h normally. • Passive Arming: the LED will not flas h during the coun tdown precedin g the activatio n of the Starter Kill.
User Guide P. 11 Your installe r can customize th e system as to p ersona lize th ese multi-level featu res in an order that best suits you. Yo ur options are: Option 1: Level 1 (requires pressing the.
P. 12 User Guide Status Request When the Engine IS NOT Running STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s) Lock 3 flashes X X X 1 Unlock X 3 flashes X X 2 1 st sequence if locked 3 flashes X X.
User Guide P. 13 Status Request When the Engine is Running When the vehicle doors are loc ked: The LED # 1 will flash 3 times to denote that the vehicle’ s doors are locked. When the vehicle doors are unl ocked: The LED # 2 will flash 3 times to denote that the vehicle’s doors are unlocked.
P. 14 User Guide Diagnostics – Parking Light Flash Table Flashes Description 1 • Doors locked, star ter kill armed. • Run time has exp ired. • TRUNK button pressed. • Start signal receiv ed by the mo dule. • Cold weather mode cancel led. 2 • Remote start atte mpt cancelled by remote.
An important point after buying a device Autostart Two-Way Led Transmission Remote Starter (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart Two-Way Led Transmission Remote Starter yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart Two-Way Led Transmission Remote Starter - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart Two-Way Led Transmission Remote Starter you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart Two-Way Led Transmission Remote Starter will certainly help you make a decision on the purchase.
If you already are a holder of Autostart Two-Way Led Transmission Remote Starter, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart Two-Way Led Transmission Remote Starter.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart Two-Way Led Transmission Remote Starter. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart Two-Way Led Transmission Remote Starter along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
